If you can reply to this email with the pictures I can help you out. Just be sure to let me know what the product is they are installed on! view full answer...
It sounds like you might be looking for an Access Lorado Soft, Roll-Up Tonneau Cover # 834532006380 for a 2007 Nissan Frontier with a 5 foot long bed. If you just need the replacement tarp, let me know the serial number off your rails and I can get your the correct replacement tarp to fit. view full answer...
The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White # MA8335A5261 is the replacement I recommend for you and it has a simple installation. It will fit your Coleman AC unit. view full answer...
Yes, the adapter clamps that are used to secure the Extang Trifecta 2.0 Tonneau Cover # EX92985 to the Utili Track on your 2018 Nissan Frontier can be found with part # EX2244-0204. This includes all 4 clamps needed for installation.
If you can tell me what model tonneau cover you have I will be happy to verify if these will work. view full answer...
The key for selecting a replacement grease seal is the reference number, in this case # 10-9. The manufacturer code does not matter. This is a single-lip seal with an inner diameter of 1.500-inches and an outer diameter of 1.987-inches. It is compatible as a replacement for the following other manufacturers' parts:
Dexter 010-009-00
Transcom 15191VB
National 474276
NOK AR2266FO
Chicago Rawhide 14840
If you prefer a double-lip seal in this same size use # RG06-020 which is sold as a pair. view full answer...
You could replace a double-eye leaf spring with a slipper spring like the # e33SR spring you'd looked at, but it's recommended that you remove the existing rear hanger (assuming it's a single axle trailer) with a rear hanger like # 115706S as your existing rear hanger isn't designed for use with slipper springs.
You'll also want to choose a spring with sufficient capacity to handle the weight of the boat and trailer. You can choose a higher rated spring than your existing one, but be aware... view full answer...
The most I was able to find about the Coleman 4735CC201 leaf spring is that it's rated for 1,000 lbs which means it goes to a 2,000 lb axle. For that application we have the 4-Leaf Slipper Spring w/ Radius End # e69SR which measures 25-4/8" long from the center of the eye to the end of the spring itself. If you use a jack to raise your trailer by the frame you will be able to get under the trailer to measure the leaf spring without it being compressed and compare that to our length.
Something... view full answer...
The photo of your lock did not come through but we can still help.
If possible, please re-check the face of the lock for a part number reference. Usually Thule lock cores have a key code lightly stamped into the ring around the key hole, as shown in the linked photo. If you can spot this number you can order just the replacement keys. Simply add the code you find to this prefix THKEY _ _ _ _ . For the lock used in the example photo the correct key is # THKEYN030.
If the lock code is worn... view full answer...
Trailer running lights not working with certain Nissan vehicles is a common problem with an easy fix. There is a relay for the trailer running light circuit that is located in the fuse box (in the cab). If that relay is missing or no longer functions then it can be replaced with one of the blue relays from the Curt Relay Kit # C57000.
The relay of the running light circuit on your 2013 Nissan Frontier is in the relay harness behind the passenger floorboard kick panel.
If you check out... view full answer...
The T-Rac TracRac ladder rack you have was made by TracRac before they were aquired by Thule in 2010. Currently Thule does not have any replacement parts which will allow you to attach this ladder rack to your truck. Their current version of the TracRac # TH43001XT-600 uses a bolt on style rail the uprights can slide forward and back on. You may be able to find some of the older rails and have them modified to fit your truck, otherwise you will need to have some custom fabricated rails... view full answer...
I'm fairly certain Nissan would offer a replacement, but I'm not aware of the OEM part number. We do offer an aftermarket replacement that would work great for you.
The Tow Ready # 118267 is the correct replacement 7-way trailer connector for your 2016 Nissan Frontier. If the 7-way connector was broken, I'm guessing you'll need another mounting bracket as well. We offer a replacement bracket as part # PK12711U.
If you click the provided link, you'll see a video where my buddy Randy will... view full answer...
For your wheel bearing, races, and seals, I don't have the dimensions available. For a precise fit, I'll need you to give me the inner diameter and the outer diameter measurements of your bearing.
Most 4 lug hubs use the same bearings so it is a good possibility that the TruRyde Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal # DL21792 may fit. I've attached a video of this kit for you. view full answer...
I do have an option for you but spring bars are not interchangeable across brands. The only option we can offer is a new system. I recommend the Curt TruTrack Weight Distribution System part # C17500 which is a complete system with pre-torqued hitch ball ready to go. It has a 10,000 lb capacity. There's a 15,000 lb capacity as well, part # C17501. view full answer...
We do have some replacement clamps for the ladder rack on your 2016 Nissan Frontier but they are specific to the type of ladder rack you have. For a Thule Xsporter we have the # 8523159001 for silver and # 8523159002 for a black rack. T
If you have a TracRac G2 or a TracONE ladder rack you need the # PT-27064 for silver or # PT-27064-02 for black. I recommend comparing these to your current clamps to see which style you have. The clamps for the Xsporter are more squared off at the top... view full answer...
According to my Wesbar representative, the 7292 light is no longer available, although I did find some with red lenses online by doing a Google search. I looked though our selection of amber clearance/marker lights, and was unable to find anything with a matching bolt hole pattern. Unless you can find one online, you'll probably find your best bet will be to replace the lamps. I've linked to our selection of amber marker/clearance lamps. I'd recommend going with LED lamps if possible. They'll... view full answer...
The TruXedo TruXport Soft Roll-Up Tonneau Cover that fits your 2013 Nissan Frontier short bed is part # TX292301. For a replacement vinyl tarp only you can use part # TX2923-CVR. For replacement Velcro you can use Truxedo Shur-Bond Velcro Brand Fastener, part # TX1117876.
Since your cover is a few years old, it will likely have a slightly different fit than a new cover will and so I suggest you install a new vinyl tarp as this may well help with your leakage issue more than just new Velcro. view full answer...
The bolts for installing Draw-Tite part # 75282 are hex bolts M12x1.25x35mm. These bolts are included with the hitch. All Draw-Tite bolts and nuts are grade 5 unless otherwise specified.
If you need a replacement set of hardware, we have them available. Part # RHK is our replacement hitch hardware kit. You select the hitch manufacturer and enter the model number and we will put together a hardware kit for your hitch. All the nuts, bolts and washers in our kits are up to the manufacturer... view full answer...
I have a solution for you, but we do not have the individual hardware kits for each hitch built out within the site- there are just too many to list. In order to get the correct Replacement Hardware Kit # RHK , you'll simply go to the linked page for the RHK and select the manufacturer of the hitch, in this case it is a Curt. After that, you'll put in the part number of the Curt Hitch # 13241 where it says "Hitch Item Number". After you've done that, you'll just add the item to your cart... view full answer...
I contacted the manufacturer about if there are clamps to attach the TruXedo TruXport directly to the utilitrack on your 2019 Nissan Frontier. They informed me that there are not clamps to connect the cover directly to the utilitrack on the Frontier because the track will sit below the clamps.
They said that the correct clamps for the TruXedo TruXport that fits your 2019 Nissan Frontier are the Replacement Mounting Clamps for TruXedo Tonneau Covers # TX1703561. view full answer...
It sounds like you're talking about the Velcro strips that keep the cover secure on the sides on your 2010 Nissan Frontier. You can use the Replacement TruXedo TruXport Shur-Bond Hook-And-Loop Fastener Strips for 6-1/2' Beds # TX1117876 and cut it down to size. If you needed the loop side for the tarp then you can use two of the # TX1705183.
If you meant the corner weather seals we have the Replacement Corner Weather Seal for TruXedo TruXport Covers # TX1703568. We also have the rear... view full answer...
Go To Results