We have everything you need to replace the hub and brake assembly on your Keystone Cougar Trailer, but unfortunately trailer manufacturers do not keep an accurate or readily available record of the smaller parts that they install on trailers. Because of this, the best method for determining which hub will fit your trailer is to simply pull the hub and check for the bearing numbers that are used. The numbers should be stamped right onto the bearings themselves. If you cannot locate this... view full answer...
I fully understand wanting a backup unit! Based on your information, I recommend the Lippert Components Polarity Reversing Solenoid by Trombetta for Hydraulic Power, Item # LC118246. This polarity reversing solenoid is a cost effective and simple solution to keep everything working for you on your trips. view full answer...
In order to find the correct replacement landing gear legs for a fifth wheel trailer I would need you to take two quick measurements of your existing landing gear legs, the outer tube length and weld stop spacing. I have attached a photo to assist.
The most common replacement landing gear legs are the Replacement 5th Wheel RV Landing Gear Legs part # LC179013 for lead and part # LC179014 for follow. These measure 29-1/2" on the outer tube and 15-1/2" between the weld stops (inside to inside). view full answer...
Go To Results