Hello Shelby,
I reached out to our manufacturers since I was not seeing a rear sway bar on our site, they informed me that they do not make one for the 2014 Hino 268.
If you are experiencing body roll, you could use the Timbren Rear Suspension Enhancement System # THIR338. This is the best option we have.
What kind of issues are you experiencing that you are interested in the sway bar? view full answer...
We do have bushings of various sizes, but most bushings have a 9/16" inner diameter and a 11/16" outer diameter. The Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long, part # TRBU11566, is this bushing.
I did some online research and I was unable to find any information about the size of the bushings in the leaf springs on your 2010 Hino 268. You can reach out to Hino directly to get the parts you need or you can take some measurements of your existing leaf springs... view full answer...
When a brake controller like the Primus IQ # TK90160 indicates "n.c." this means something is interrupting the circuit connection between the controller's output (on the blue wire) and the trailer's brake magnets. Lots of things could cause this issue, anything from a bad wiring ground connection at the vehicle or trailer, corrosion on or inside the vehicle or trailer connectors, a bad ground at the brake magnets or simply a damaged or pinched wire.
Since the "n.c." appears on the controller... view full answer...
Go To Results