I reached out to my contact at TruXedo and she did say that the numbers you found on your tonneau cover refers to the TruXedo Lo Pro QT # TX571101. As you mentioned this particular cover isn't technically a fit for your 2004 GMC Sierra (it fits later model Sierras) but since this is what you have you will want to go with the corresponding replacement cover part # TX571101-CVR.
This will install using your existing hardware. view full answer...
The Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers # PAL9772 will work with your Leer Tonneau Cover on your 2012 GMC Sierra. This is actually the exact same part number as the product in your photo so it is a perfect replacement. view full answer...
Yes, the Replacement Remote Control # 333-336713641 will work with your Firman W3650ir generator. Your generator must have come with a remote for this to work with it. view full answer...
I have a lock that will work for you but the original lock to fit your Fulton Trailer Keeper isn't available anymore.
The lug bolt bracket is no longer available.
I tested our etrailer.com Adjustable Coupler Lock # e98883 on the Trailer Keeper and it's a little smaller than the original pin however it is definitely a good fit. view full answer...
To find the correct replacement tarp for your 2008 GMC Sierra you will need to know the brand and model of your current tonneau cover. The easiest way is to locate the serial number. Most of the time the serial number can be found on the driver's side front rail (see photo). If you can find the date code that is also very helpful.
If you cannot locate the serial number or date code you can plug your truck year, make and model into our fit-guide and browse through the Tonneau Cover page... view full answer...
The Replacement Key for Thule Roof Racks # THKEYN2808 is the specific replacement key for Thule lock cores numbered 2808 or N2808, so it is not a master key and will only work in locks with that specific lock number. In order to replace the key on your Thule lock, you'll want to check the front of your lock for the correct numbered replacement lock core. If you can let me know which number is on the front of your Thule lock I can recommend the appropriate replacement key. view full answer...
The TruXedo brand tonneau covers that fit your 2004 GMC Sierra 1500 with 6-1/2-foot non-stepside bed can be seen on the link provided. There are five different versions that fit your particular truck.
For example, if you have the TruXport cover # TX281101 the replacement vinyl is part # TX281101-CVR.
Please let me know the particular cover part you have and I will be glad to confirm the proper replacement vinyl with my contacts at TruXedo. view full answer...
If your 2004 GMC Sierra with the 6-1/2 foot bed is not the Stepside model and is equipped with the TruXedo Lo Pro QT Soft Tonneau Cover, which is the part # TX581101, the correct replacement cover is # TX1117651. This is a direct replacement and you will just use your existing hardware for installation. view full answer...
I have a couple options for you as Pace Edwards no longer makes the remote for your BLT 163 retractable tonneau cover.
First the Manual Switch Kit # 311-BL-1120 can be added allowing you to open and close the tonneau with the power switch. The switch harness is 17' long allowing you to locate it either in the bed or in your cab.
If you prefer the wireless option the Bluetooth Control Kit # PE63QJ will allow you to operate the cover from your Android or iOS smartphone using their phone app. view full answer...
According to Truxedo, the date code is printed or handwritten on the underside of the tarp, usually on the passenger side up near the cab.
The part number for the TruXport tonneau for your 2010 GMC Sierra 2500 short bed is # TX271101-CVR, but
Truxedo tells me that without either the date code or the serial number (one or the other) they cannot guarantee you'll receive the correct replacement cover. view full answer...
There are a number of different CIPA towing mirrors that fit your 2000 GMC Sierra so the correct replacement parts will depend on which mirrors you have. The part you referenced # CM11804 is replacement hardware for mirrors # 11801 and # 11802 which fit Ford trucks.
If you have mirrors # 10801 or # 10802 then the correct replacement hardware kit is part # CM10803.
If you have a different mirror you can use the link provided to identify it so we can give you the correct replacement parts. view full answer...
The Extang BlackMax tonneau covers were discontinued and makes locating the correct replacement parts a little more difficult to find.
From what I could find using your truck information, it looks like you most likely have the Extang BlackMax part 2625. Which makes the Replacement Tarp for Extang BlackMax Soft Tonneau Cover # EX1625 the correct replacement cover.
I do recommend verifying that this is the correct cover. You can do this by comparing it to the part number on your cover.... view full answer...
For a Pace Edwards Bedlocker tonneau cover you would need the Replacement Remote for Pace Edwards Bedlocker Retractable Hard Tonneau Cover # PE33QJ. Pace Edwards also has the Manual Switch Kit for Pace Edwards BedLocker or UltraGroove Electric Tonneau Cover # 311-BL-1120 that you can use to open and close your cover without the key fob. The wire harness is 17' in length so you could easily run the switch into the cab. view full answer...
The TST TPMS - Color Display - Signal Booster - 4 Internal Tire Sensors part # TST34FR does not use replaceable batteries. The batteries have an estimated life of up to 4 years. Once the batteries die, you'll need to replace the sensor using part # TST-507-INT-S1. view full answer...
Thank you for the picture!
I gave my contact at Dexter Axle the serial number off of your tag and he said that the replacement brakes for your #12 torsion axle include part # 23-180 for the left hand side and part # 23-181 for the right hand side.
If you would like to upgrade to the Nev-R-Adjust brake assemblies then you would need part # 23-464 for the left hand and part # 23-465 for the right hand. The advantage to the Nev-R-Adjust assemblies is that you don't have to manually adjust... view full answer...
Replacement key fobs are available for Pace Edwards powered retractable tonneau covers, but we'll need to know the model number in order to find the correct fob for you. The Replacement Remote # PE33QJ for example, is compatible with the Bedlocker covers. view full answer...
Thank you for the image. It appears you will need either the Demco Channel Tongue Trailer Coupler # DM13203-95 or # DM16080-95. Both of these couplers have a zinc coating for increased corrosion resistance and fit on a standard 3" wide channel tongue.
The Coupler # DM13203-95 has the bolt holes spread 5" on center and 0.85" from the top of the coupler.
The Coupler # DM16080-95 also has the bolt holes spread 5" on center but they sit lower at 1-1/4" below the top of the coupler.
If... view full answer...
There are two replacement arms for the Lippert Components High-Speed Power Stabilizer Jacks, the Replacement Electric Stabilizer Jack Support Arm part # LC1134122 for yellow and part # LC1134121 for black. If you currently have yellow arms then you will need to use the yellow replacement but if you currently have black arms you will need to use the black for replacement. view full answer...
Yes, the Replacement Cap Kit for HappiJac Manual Truck Camper Jacks # LC183332 will fit your HappiJac Model 4150 jacks. I verified this with the manufacturer. view full answer...
Go To Results