It looks like you have an older Thule T2 Hitch Mount Bike Rack and the correct replacement hitch bolt/pin for this is the Thule Snug Tite Hitch Lock and Anti-Rattle Device part # THSTL2 for locking or Threaded Hitch Pin for Thule part # TH62RE for standard. view full answer...
Thanks for the photo. I see you are looking for the Replacement SuperLatch Handle Assemblies part # Y8880348 (2009+ Models Only). This installs in the hole you have attached a photo of. view full answer...
According to Thule, who manufactured that box, the mounting holes in the underside of that box should be about 4 inches apart. If that's indeed the case, the # TH02943 would be the correct U-bolt. view full answer...
Yes, the converter section for the Progressive Dynamics panel part # PD4575K18LS8 (current part number for the # PD4575A) that your customer has is available separately with the part # PD4575CSV. view full answer...
We do have a replacement key for your 2854 lock on your Sears X-Cargo Sport 20 carrier, # THKEYN2854. But, unfortunately since the lock was drilled and you need the lock core and key, we do not have a core/key combo with the 2854 code.
We do have the Replacement Lock Core and Key # SR03807 which will work for your Sears X-Cargo Sport 20 carrier and provide a lock core and key, but it will have a different lock number. view full answer...
One way to determine the lift and jack height you need would be to measure the jack you currently have on your 2018 Intech Luna RV. If this is not possible, or you still aren't sure, you can also determine the correct jack using the coupler height on your trailer and the height of the jack.
With the trailer level and parked on level ground, measure the height from the ground to the bottom of the coupler. You want the jack to be able to extend about 4" above this measurement so you will... view full answer...
Thule has indeed produced cargo boxes on an OEM basis for other companies such as Sears and sometimes these have different hardware than the regular Thule products (to allow them to hit a different retail price point). Thule may also change their hardware during later production runs to new and improved types. The good news is that there are several options in mounting hardware for cargo box such as the similar Time Travel TH667ES.
We offer only the U-bolt for the EasySnap Mounting Hardware... view full answer...
The Wesbar Mini Clearance and Side Marker Trailer Light part # 203233 is a submersible light therefore, the bulb cannot be replaced without braking the seal. If you don't mind breaking the seal to change out the bulb then you can do so with a 193 bulb but otherwise you would need to replace the entire light if the bulb goes out. view full answer...
Your current 20.5x8x10 size tire is equivalent to the current tire size of 205/65-10 which has an overall diameter of 20.5" and a rim width of 6". Since your wheel has a 5-bolt pattern it should be the 5 on 4-1/2" bolt pattern which is the most common.
I took a look at the specs for your 1991 Coleman Shenandoah and it looks like this pop-up camper came with a 2,000 lb axle. With that being said, I recommend going with the Kenda S-Trail ST145R12 Radial Trailer Tire with 12" Galvanized Spoke... view full answer...
I see exactly what you are talking about. I checked the stock we have on hand and all of the # 118241 wiring harnesses have the pins in the 3 O-clock and 10 O-clock positions with the locking tab up. I then spoke with our installation tech and he feels that the directions for the 1999 Explorer are wrong. He says that he remembers having to use the connector that is on the drivers side and that the picture on our web page was taken following the manufacturers directions and never got corrected.... view full answer...
It is possible to bypass the original cooler and install a cooler like the # D33504 Derale Series 8000 Plate-Fin Transmission Cooler. It is typically recommended to install this with your factory cooler to assist in the cooling process. I would not recommend this if you plan on doing some heavy towing.
Since this would be the only transmission cooler, you will want to use a larger model like a class IV or V. The # D33504 Derale I already mentioned is a Class IV plate-fin cooler that is... view full answer...
If you had a Westin Grille Guard part # 40-0245 which is a fit for your 2000 Ford F-150 the correct replacement hardware kit would be the part # 40-024PK that you referenced.
We don't carry the Go Rhino Step Guards so we do not have any hardware kits that will fit it. view full answer...
It looks like you need replacement hitch bolt, nut and clip # Y8780022. It fits into a 2 inch or 1-1/4 inch shank to provide anti-rattle capabilities of certain present and discontinued Yakima bike racks including the BigHorn, KingPin, BackSwing, FullSwing, and SlickROC. Yours looks like an early BigHorn. view full answer...
The Yakima EXO Swing Away 2 Bike Rack # Y34ZR that you referenced comes with basically a random set of matching SKS lock cores but if you let me know what number you have I can let you know which cores you'd need. view full answer...
We sure do!
For a 1 inch diameter replacement shank, use # 106B or for a 3/4 inch diameter shank, use part # 104B. Both shanks are stainless. There is also a protective cover available for the shanks which is part # 005B. view full answer...
I am sorry to hear that someone stole part of your Thule Vertex 9028XT bike rack.
The replacement Anti-Sway Attachment can be found on our site listed as part # 852-2903-001. view full answer...
The 2010 Ford Expedition should have a round connector at the rear of the vehicle where your 4 pin plug is plugged in. If there is a round connector there you can use the Replacement Multi-Tow 7-Way and 4 Pole Trailer Connector, item # 74682, to replace the 4-Way OEM connector on your Expedition.
If your Expedition does not have the mating round connector under the rear of the vehicle you will need to use a 4-Way to 7-Way adapter like item # 37185, to provide a 7-Way connector at the rear... view full answer...
Go To Results