bing tracking image
  1. Vehicle Suspension
  2. ARB
  3. Lift Kit
  4. Off-Road/Performance
  5. Front Axle Suspension Enhancement
  6. Rear Axle Suspension Enhancement
THIS ITEM IS NOT A FIT FOR
2000 Acura TL
ARB

Old Man Emu MT64 Suspension Lift Kit w/ Upper Control Arms for Toyota 4Runner - 2-1/2" Lift

Part Number: ARB77SW
$2,621.70
Vehicle Suspension
Not Confirmed to Fit

2000 Acura TL

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Has your 4Runner lost ride height because you installed a bumper or winch? This kit restores 2-1/2" of lift, smooths out the ride, and brings back control. Upgraded upper control arms correct geometry and restore confident handling. Great Prices for the best vehicle suspension from ARB. Old Man Emu MT64 Suspension Lift Kit w/ Upper Control Arms for Toyota 4Runner - 2-1/2" Lift part number ARB77SW can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Q & A (0)
  • Photos

ARB Vehicle Suspension - ARB77SW

  • Lift Kit
  • Off-Road/Performance
  • ARB
  • Front Axle Suspension Enhancement
  • Rear Axle Suspension Enhancement
  • Standard Duty
  • Suspension Only

Has your 4Runner lost ride height because you installed a bumper or winch? This kit restores 2-1/2" of lift, smooths out the ride, and brings back control. Upgraded upper control arms correct geometry and restore confident handling.


Highlights

  • Handles Heavy Front Loads: Built for bumpers, winches, and 220 to 330 lbs of gear up front.
  • Matched to Your Build: Coil springs, struts, and shocks selected for your 4Runner's setup.
  • Keeps Rear Height Stock: No lift needed if you're not carrying rear gear or drawers.
  • MT64 Struts and Shocks: Built to stay firm under load and smooth over rough terrain.
  • Direct Fit, Factory Mounts: Installs without cutting or weldingeverything bolts up clean.
  • Tested Where It Matters: Proven in Australia on rigs that carry weight and travel far.

Features to Know About

Front-End Weight Takes Its Toll

If your 4Runner is running a bumper, winch, skids, or recovery gear, you've probably noticed the front end sag and the ride suffer. This kit brings back 2-1/2" of lift and gives you the control and ride quality you need with a loaded front end.

Built for Hard Miles

MT64 struts and shocks are made for trucks that don't get babied. The oversized 64mm bore holds more oil to stay cool on long trips, and the aluminum body sheds heat fast. You get solid control through rough terrain without getting bounced around on pavement. They feel firm when you need it, smooth when you don't.

Install It and Drive

This system bolts into your 4Runners factory mounts—no cutting, no fabrication. The struts, shocks, and coils are matched to your lift and gear so it installs clean and works right the first time.

Drives Better, Feels Better

You'll notice right away the stance feels balanced, the handling is tighter, and your 4Runner feels more stable under load. It's the kind of suspension you wish came from the factory—now built for how you actually use your truck.

Restores Suspension Geometry

The upper control arms keep your suspension angles where they should be after a lift, improving steering response and protecting other suspension parts from excess wear.

Durable, Low-Maintenance Design

Forged arms with grease-free bushings and high-strength ball joints provide long-lasting performance, better handling, and more even tire wear on and off the road.

Specs:

Ride Height & Load:

  • Front Suspension:
    • Lift: 2-1/2"
    • Load Rating: 220 to 330 lbs
  • Rear Suspension:
    • Lift: 0"
    • Load Rating: stock build

Shock & Spring Details:

  • Design: Monotube
  • Shock Type: MT64
  • Strut Type: MT64
  • Coil Spring Rate: 588 lbf/in

Included Components:

  • 4007 Old Man Emu Front Coil Spring Set (1 pair)
  • MT64901007 Old Man Emu MT64 Strut Front (2 each)
  • MT64601009 Old Man Emu MT64 Shock Absorber Rear (2 each)
  • UCA0004 Upper Control Arms (1 pair)


2109K Old Man Emu MT64 Suspension Lift Kit for Toyota 4 Runner - 2" Lift - 220 to 330 lb Load - Off-Road

UCA0004 ARB Old Man Emu Front Upper Control Arms - UCA - Lifted Suspension - Off-Road - 50 mm

Installation Details ARB77SW Installation instructions

This Product Fits The Following Vehicles



California residents: click here


0
0

See what our Experts say about this ARB Vehicle Suspension


Info for this part was:

Employee Daron K
Edited by:
Daron K
Employee Katherine B
Updated by:
Katherine B
Employee Dawn Z
Written by:
Dawn Z

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<