ARB Vehicle Suspension
- ARB89SW
- Lift Kit
- Off-Road/Performance
- ARB
- Rear Axle Suspension Enhancement
- Heavy Duty
- Suspension Only
Built out your FJ with gear front and rear? This MT64 kit adds 2" of lift all around and is tuned to support up to 330 lbs up front and 440 lbs in the rear. Upgraded upper control arms correct geometry and restore confident handling.
Highlights
- 2" Lift for Balanced Builds: Front and rear lift with support for gear at both ends.
- Handles 330 lbs Up Front: Built for bumpers, winches, or a recovery setup.
- Tuned to Support 440 lbs in Rear: Great for drawers, racks, or light overland loads.
- MT64 & Coil Spring Upgrade: 2-3/4" aluminum shocks and matched coils improve ride and stability.
- 6-Position Adjustable Spring Seat: Dial in your front height as your build evolves.
- Factory Fit Install: No cutting, no welding—everything bolts to OE mounts.
Features to Know About
Ready for Gear at Both Ends
If your FJ is running front-end protection and loaded in the rear with drawers or recovery gear, this kit is built to support it. It maintains ride height and control with up to 330 lbs up front and 440 lbs in the rear all while delivering a 2" lift all around.
MT64 Ride Quality, Built to Last
The MT64 monotube shocks use a 2-3/4" aluminum body to stay cool and perform consistently across miles. Whether you're hitting the trail or hauling gear across town, they feel firm when you need it and smooth when you don't.
Install It and Load Up
Everything bolts to your factory mounts. No cutting, no fab work, and no wondering if it will align right. This kit is designed to fit and function cleanly, even on loaded builds.
Matched Coils and Adjustable Front Height
This is a full coil spring replacement kit, no spacers or shortcuts. The front struts include 6-position spring seat adjustment so you can fine-tune ride height for your build now or later.
Restores Suspension Geometry
The upper control arms keep your suspension angles where they should be after a lift, improving steering response and protecting other suspension parts from excess wear.
Durable, Low-Maintenance Design
Forged arms with grease-free bushings and high-strength ball joints provide long-lasting performance, better handling, and more even tire wear on and off the road.
Specs:
Ride Height & Load:
- Front Suspension:
- Lift: 2"
- Load Rating: 0 to 330 lbs
- Rear Suspension:
- Lift: 2"
- Load Rating: 440 lbs (constant)
Shock & Spring Details:
- Design: Monotube
- Shock Type: MT64
- Strut Type: MT64
- Front Coil Spring Rate: 588 lbf/in
- Rear Coil Spring Rate: 318 lbf/in
- OE Rear Coil Spring Rate: 150 lbf/in
Included Components:
- 2896 Old Man Emu Coil Spring Set (1 pair)
- 4007 Old Man Emu Front Coil Spring Set (1 pair)
- MT64601009 Old Man Emu MT64 Shock Absorber Rear (2 each)
- MT64901007 Old Man Emu MT64 Strut Front (2 each)
- UCA0004 Upper Control Arms (1 pair)
4103K Old Man Emu MT64 Suspension Lift Kit for FJ Cruiser - 2" Front Lift - 2" Rear Lift - 0-330 lbs Front Load - 440 lbs Rear Load - Off-Road
UCA0004 ARB Old Man Emu Front Upper Control Arms - UCA - Lifted Suspension - Off-Road - 50 mm
Installation Details 
This Product Fits The Following Vehicles
WARNING: This product contains chemicals known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.