This round backup light throws out a strong, even pattern thanks to its 27 white LEDs under a clear lens. It’s built for 24V DC systems and certified for backup light use when installed as a pair in a 2-lamp setup. The LEDs use far less power than old incandescent bulbs while giving off a brighter, cleaner light. You’ll never have to deal with burned-out filaments or bulb swaps again—the diodes are rated to last up to 50 times longer and carry a lifetime warranty.
Wet roads or full submersion won’t hurt this light. The polycarbonate housing and lens are sonically sealed together into one solid unit, keeping water from reaching the diodes or circuit board. That sealed design makes it ideal for trailers that see frequent dunking or heavy spray. You get consistent performance without worrying about leaks or corrosion cutting the life short.
The housing and lens aren’t just waterproof—they’re tough. Made from impact-resistant polycarbonate, the shell stands up to vibration, bumps, and road wear. That durability means you can mount it once and count on it to keep working trip after trip, even when conditions aren’t gentle.
This 4-5/16" diameter light recess-mounts neatly using a grommet (A45GB, sold separately) for a flush finish that stays out of harm’s way. It accepts standard 2-prong plugs like the A49PB or A45CB (sold separately), so hooking it up is simple and secure. At just 2" deep, it’s easy to fit in tight spots while keeping the back end tidy and professional looking.
You don’t have to guess about legality—this light meets all DOT and FMVSS 108 requirements in any 360-degree mounting position. That means reliable brightness and coverage that help make your trailer visible during reversing, keeping things both safe and street-ready every time you tow.
Ratings & Reviews
The pictures speak for themselves !! Couldn't be happier Just gotta get the taillights that match now. STL190RB
These reverse lights dress the back of of our flat beds nice and there real bright.
The lights are much brighter than the originals and the installation was easy. The website is easy to navigate and the service was fast.
Replaced your OEM lights with up to date clarity and the same fit with no hassle!
Perfect fit 2017 Georgetown xl 369ds
LOOKS 100% Better ! Ty
unimaginable improvement from one ancient and lackluster incandescent bulb to 10 LED diodes-requires modification of hole but is fairly simple and worth the effort-I used it as the porch light on my '72 airstream reno-great result!
They look good just bought them as spar es
These lights are great. They light up much better than the stock incandescent bulbs that were in my ranch hand bumper. I can see great when backing my truck up now. They also fit better than the original bulb housings.
Great and perfect replacement for the backup lights in my headache rack.
Not to bright i guess they will do
Nice & bright - should definitely provide more light when backing at night vs. the old incandescent bulb.
the light fixture works very good except when used in the bracket, it leaves the back exposed to being hit by road debris. There is no cover on the light fixture. Therefore i went to a local fabricator and he made a fixture out of 2x4 steel tubing. The gasket fit perfectly but when i went to us the 2 wire pigtail, it was at the wrong angle for the light. I purchased another one locally. just wanted you to know that i could only use the light and the gasket.
Thank you for your prompt service.
These lights have been an outstanding upgrade from the original incandescent brake/turn/tail/reverse lights on my department's 1992 water tanker. The diodes in the lights are really bright and can be seen clearly at nighttime or during the day. 10 out of 10, would recommend!
I purchased this Optronics LED Backup Light to supplement the amount of reverse light that the T Bargman LED taillights provide. I installed them on a 1991 Ford E450 21 passenger church bus. This light is intended to be installed in a steel trailer frame with a rubber grommet which I did not order. I did not realize that a grommet was required. I probably would have ordered the grommets just in case I needed them but it was not made obvious to me on the website or recommended that I may want to consider including them in the order. After receiving the package and examining the light I realized that there was no way to secure the light into place without something. I went back to the website and looked up the light again and drilled down to the bottom and there it was, the grommet that I needed. Why didn't the site make the recommendation more obvious or suggest this part before ordering like it did with the wiring lead...? I was able to still make the lights work, it just took a little bit of planning which was required anyway with this custom retrofit application. I cut a precise hole into the fiberglass so that I could recess the light, which was my original plan even before realizing that the light required a grommet. I recessed the light in the hole and glued it in place with silicone. Time will tell if this was a good idea or not. I wish that I would have ordered the elbow wiring leads in stead of the straight ones. I ran into a clearance issue with the straight lead and had to modify them as well.
I purchased these Submersible LED bulbs for my boat trailer for two reasons. The first is so road traffic is aware of my intentions of backing up and the second is to make it easier to back my trailer into my driveway at night. The only thing that I find disappointing about this product, is that the wires are not sealed. You have to plug a pigtail in to power the bulb. Although they say it is watertight, I still plan on sealing the plug with some marine grade silicone sealant. Otherwise I am very satisfied with the way these bulbs light up my path of travel.
Looks and works good
Product exactly as needed. Existing lamps last about 8 to 10 weeks as docking lights on my motorhome; there are four - one at each wheel. These lamps fit perfectly and are much brighter. My expectation is that these lamps will last more than a year(?) We'll see.
These Lights were a perfect fit for my RV. They easily fit over the OEM flush mounted incandescent lights that were very dim by comparison. The soft rubber gasket that came with them made installation very easy and watertight. As you can see in the picture, I replaced both my brake & back-up lights. I've had several compliments on their looks by people that saw my RV before I installed these too! But most of all, I'm very satisfied with the huge increase in brightness when I need it. I would recommend these for any do-it -yourselfer out there to upgrade existing trailers, or for something you're building!
Nice lights. I have the 36 diode oval LED lights mounted on a flatbed truck as reverse lights and they are not near as bright as these 10 diode lights. I have the 10 diode lights mounted inside a 6ftx20ft stock trailer on a toggle switch. There is one at the front and one at the back. They give off plenty of light to load and unload horses and cattle in the dark. I would buy these again for the next trailer I rebuild. The team at etrailer.com is top notch as well. Your order will ship the same day and arrive in a timely manner. If it does not they will tell you why. Great people to do business with.
Just what was needed to brighten up the rear of my horse trailer when loading and unloading in the dark
Perfect replacement for the reverse lights on boat trailers. A better buy than ordering from the trailer company.
With several of the MCL31 clearance I had half or all of the LEDs stop working. I did not at the time realize they had a lifetime guarantee so I just threw them away. When A bunch of the LEDs in both BUL52CBs and about half of the turn/stop LEDs in the STL37RB went out, I contacted etrailer and they happily replaced them, but it took a couple of weeks and I had to pay the shipping. When I replaced all of my trailer lighting, I had thought that I would never have to worry about it again. LEDs should last forwver. That turns out to not be the case and it is a lot harder to change out hard wired LEDs than socketed incandescent bulbs. I wish I could find reliable long lasting LED trailer lighting.
Awesome LED light.... just what the doctor ordered for my bus!!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.