This hydraulic jack system does the heavy lifting for you. The double acting pump delivers up to 3,200 psi of raising pressure and 1,500 psi for lowering, so you can lift or retract even a fully loaded trailer with smooth, controlled movement. Just press the button and the pump and selector valve handle the rest—no cranking or muscle needed. The system includes all hoses and fittings needed to connect the pump to the jack, making setup straightforward and reliable.
Uneven parking areas and gravel lots aren’t a problem with the pivoting foot pad that’s designed to stabilize the jack on rough terrain. The 9-1/2" by 9-1/2" footplate spreads the load evenly and helps prevent sinking or shifting. It’s built to hold steady under pressure, so whether you’re working on a jobsite or a dirt driveway, your trailer stays balanced and secure.
With a 10,000 lb lift capacity and 12,000 lb support capacity, this jack system is made for serious work. The square 4" x 4" tube comes in a durable exterior-grade black finish that stands up to the elements. From daily hauls to long-term storage, it’s engineered for strength and longevity. The maximum hydraulic flow rate of 2 GPM provides quick response, so you spend more time working and less time waiting.
The integrated selector valve ensures consistent, smooth operation—no jerks or sudden drops—keeping both you and your load safe. The full range of movement from 30-3/4" retracted to 50-3/4" extended gives you plenty of adjustment for hitching or leveling. And with a 3-year warranty backing it, you can trust this system to perform lift after lift without hesitation.
For best performance, this system runs on Dexron 3 hydraulic fluid, giving you dependable response in all lifting and lowering operations. It’s a proven fluid type that ensures the pump and cylinder operate smoothly and maintain pressure when you need it most.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. Steve here with etrailer.com. Today we're looking at our Dexter Single Hydraulic Jack System with Double Action Pump, rated at 12,000 pounds capacity. Now folks, this is just the single action pump with the included motor and the reservoir here for your fluid. We do offer an additional jack leg with a add-on select valve, and you can purchase that separately. I'll put that add number on the screen if you want to go ahead and do two jacks versus one.
Now, a hydraulic jack kit is gonna be a lot smoother, a lot quieter than your traditional jacks where you gotta hand crank, even with the electric motor ones where you have to hear the noises and mess with those kind of things. This will give you a smoother up and down so it'd be great for maybe horse trailers with livestock, those kind of things, as well as your commercial and construction needs as well. Now again, it is a double acting pump and power unit that would attach to the jack with the included hoses and fittings. I put these hoses on top here. As you can see, they're pretty long.
And these would connect right here in the front. There's two connection points. I'm gonna set them off to the side here for now. And we're gonna zoom in and take a look at everything else. So you've got your motor here with the pump, and you've got the reservoir here for all the hydraulic fluid.
You've also got a nice remote here that would match up to the cord here on the pump and reservoir. You've got a nice bungee cord here for keeping those hydraulic hoses up and outta the way. And spinning it around to the back here you've got some hydraulic hose, elbows, and straight fittings, and you've also got your positive and negative connectors for the battery for powering up this unit here. Now this foot plate where we resumed in does pivot, and that's gonna help you on uneven surface. The foot plate is nine and a half by nine and a half square.
The jack tubing is four inch by four inch. The height of this jack, when it's fully retracted like it is now from the ground to the top, I got 30 and three quarter inches tall. And when it's fully extended, I got 50 and three quarter inches tall. Now has a max pressure when it's raising of 3,200 PSI, and when it's lowering it's 1500 PSI. The maximum of hydraulic flow rate is gonna be two gallons per minute. Now there's a selector valve that's gonna create a smooth and efficient operation, even for those heavy loads. And the square tube has a nice black powder coat finish and that would simply bolt to your trailer frame. Now you got a nice powder coat finish here on the motor itself as well. Well, folks, I think that's gonna wrap it up. Just a real quick look today at the Dexter Single Hydraulic Jack System with Double Acting Pump. I'm Steven. Thanks for watching.
Ratings & Reviews
It was quick and easy to install and updated my dump trailer very nicely. It's till working great.
Great product and everything worked as expected!
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.