To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy trailers or bed loads can make the rear sag and throw off steering and braking. These SumoSprings Solo helper springs add up to 2,800 lbs of support at 50-percent compression to keep things level and balanced when towing or hauling. By helping your factory suspension bear the weight, they improve control, keep your ride height even, and maintain safe headlight aim so you stay confident behind the wheel.

Every load is different, and these springs adapt automatically. With a lighter load they compress easily for soft engagement and a comfortable ride. As the weight increases, they can compress by as much as 80 percent to add firm support. That progressive spring rate smooths out bumps and vibrations so your truck feels steady whether you’re running light or loaded down.
When a curve or uneven load tries to push you around, each SumoSpring works independently to keep its side planted. That action reduces body roll and sway so your vehicle stays stable through corners, crosswinds, or uneven ground. The improved balance makes highway driving and sharp turns feel more controlled and predictable.
Made from durable microcellular urethane, these springs handle temperatures from -25 F to 200 F and resist abrasion, oils, road salts, and UV rays. They compress vertically with minimal side expansion, so they aren’t easily damaged in tight spaces. With no air lines or pressure to maintain, they’re completely maintenance-free—just install them once and get reliable support every time you haul.
You don’t need a lift or air tools to get these on. The one-piece jounce-style springs mount using your existing suspension points with no drilling required. It’s an easy upgrade that replaces factory bump stops and adds dependable load support without extra parts or upkeep.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a look at the SumoSprings rear axle solo custom helper springs. Now, these springs are designed to fit your 2010 and newer Isuzu N-Series. And on custom-fit parts such as these springs, I do recommend taking advantage of our vehicle fit guide. Simply input the year, make, and model of your vehicle and our fit guide will confirm if these will work for you, or if we have something comparable that will work for you. So as you know, towing or hauling a heavy load can cause rear sag as your factory suspension compresses under the weight of the load.
This means that the rear axle is trying to support not only the extra load, but also the weight of your vehicle. And because there is less weight on the front of your axle, your front tires make less contact with the road, which causes problems with traction, steering, and braking. So these SumoSprings are gonna upgrade your vehicle's factory suspension to level your vehicle, improving the driving performance, and keeping your ride comfortable. These 2,800 pound capacity helper springs provide progressive load control. The more you load them, the stiffer they become.
With a lighter load, the springs will compress easily for soft engagement and a less bumpy ride. And the closed cell urethane material allows for a smooth contact between the springs and your vehicle. And the springs act like a shock absorber to dampen road vibration. Now, these springs can compress by as much as 80% to support a heavy rear load and to help your factory suspension bear up under the load. This evens out the weight, which is going to level your vehicle and ensure that your front tires are making better contact with the road.
So a level ride means that you have improved driving control, it ensures safe head lighting, and it helps to minimize sway. The springs also supports your factory suspension, which helps prevent sagging, and it's gonna reduce that bottoming out. These springs are gonna work independently from one another to support each side of your vehicle. This action helps to reduce body roll when you make a sharp turn, and this also helps compensate for an off center load. So these microcellular urethane springs are tough, they're gonna resist abrasion oil, salt, and UV rays that can more quickly wear out other springs, and they perform well in temperatures ranging from negative 25 degrees Fahrenheit, all the way up to 200 degrees Fahrenheit.
SumoSprings compress vertically with minimum expansion to the sides, so they won't be damaged by nearby mechanical parts, and they fit safely into tighter spots. And unlike air springs, SumoSprings require no maintenance or adjustment. These jounce-style springs are made here in the USA. And again, they are custom-designed to fit your Isuzu N-Series. Again, 2010 and newer, and they are going to install very easily. What's nice about these No drilling is required and it does include the hardware, which I have loosely attached here as well as these one-inch spacers. So you're gonna have everything that you need to install these. Easy install instructions are included to guide you through that installation process. And the weight capacity at 50% compression, again, is 2,800 pounds. But I do wanna point out that SumoSprings do not actually increase your vehicle's weight carrying capacity. So you wanna make sure that you're not exceeding the manufacturer's recommended weight limit. These do have a limited lifetime warranty. And that's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Ratings & Reviews

Claire H.
9/1/2026
That is the beauty of SumoSprings! Super easy to install and once they're on you can forget they're there! Are you planning on towing something with your Jeep that you want extra support for?



Heather A.
8/12/2026
Wow thank you for the glowing review Randall. It sounds like once you got them installed they are working out great. That sunset is gorgeous, where were you in this photo?


Gwendolyn Y.
5/20/2026
Looks like you were about to head off somewhere fun, Chad!

Gwendolyn Y.
4/23/2026
Thanks for the awesome feedback, Jeff! Love hearing that the install was a breeze and that you noticed such a big difference in handling, that’s exactly what you want after the upgrade. Really appreciate you sharing the photos too, it’s always fun to see the comparison.

Gwendolyn Y.
1/8/2026
Glad the Sumos are helping make your loads easier to tow!

Richard
2/12/2026
No issues. Towed a 27 Airstream around 4k miles & its all good.


Mike
7/31/2025
The springs are working exactly as expect. I have need up to the mountains numerous times and to Monerary to the Sea Otter bike fest. They have reduced the body roll and helped keep the truck stable on the mountain roads or when loaded down for camping. Im very pleased I added these Sumo Springs to my Tacoma.


Albert
7/16/2025
Still working like new. So much better than the factory bump stop.

Lazer S.
9/16/2025
Glad to hear they are helping, Cory! If you are feeling them going over speed bumps, I think taking one of the spacers out is a good idea. Especially if that is happening when you are unloaded. Speaking of which, what are you towing?



Christopher H.
8/4/2026
Happy to hear the # SSR-118-54 was a simple install and is working well for you. This is a great system!

Andrew N.
10/21/2026
Hey John, thanks so much for the detailed response and photos. That really helps other folks on the page. I'm glad install went well and you're liking them! I have these sumosprings on my Nissan Titan and it's a huge upgrade for towing!

Kate F.
7/21/2026
One of my favorite things to recommend Kevin, the feedback is always so great on what a difference they make! What are you mainly towing that needed the extra support?

Mike B.
4/24/2025
Excellent, I also tow a 6x12 cargo trailer which the Sumos do a great job of maintaining a level ride. I also installed Sumos front and rear on my 32 Tiffin motorhome. It utilizes the Ford F53 chassis and I believe they compliment that chassis well. Im definitely a big Sumo fan.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Lazer S.
5/13/2026
Glad to hear the install wasn't too bad, Michael! Definitely let us know how the ride is once you take it out for a drive! What are you using your Van for? The tires look pretty beefy.