See what our Experts say about this Rhino Rack Accessories and Parts

• Can Replacement Roof Rack be Added to 2018 Infiniti QX60 That Already Has Factory Roof Rack
  There are no aftermarket crossbars that will work on your 2018 Infiniti QX60 that already has a roof rack. The only way to add a roof rack is to have your entire factory roof rack assembly removed - the crossbars and rails - and convert your QX60's roof ro a naked roof. Only if you did that would you be able to utilize a roof rack, and there is one with 54 inch crossbars that would fit a 2018 Infiniti QX60 with a naked roof; the Rhino-Rack Vortex Aero Crossbars # RRVA137B-2. To complete...
  view full answer...
  
• Recommended Roof Rack and Kayak Carrier for a 2020 Infiniti QX60
  Yes, the Yakima JayLow Kayak Roof Rack item # Y04073 will fit on the Rhino-Rack Vortex Aero Crossbars item # RRVA137B-2. The rest of the parts you will need to attach these crossbars to your 2020 Infiniti QX60 are listed below. They do come with locks and keys. Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs - Qty 4 item # RRRLKVA Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof item # DK339
  view full answer...
• Roof Rack Recommendation for 2015 Infiniti QX60 for Cargo Box
  For your 2015 Infiniti QX60 with a naked roof the Rhino Rack roof rack you referenced that consists of part numbers # RRVA137B-2, # RRRLKVA, and # DK339.
  view full answer...
• Roof Rack to Carry a Thule Hullavator on a 2013 Infiniti JX35
  From my research the 2013 Infiniti JX35 has the options of a complete roof rack or a roof that has small flush rails along each side of the roof, which is what it sounds like you have. All of the roof racks we carry for your roof style use clamps to the sides of the roof. I recommend the Rhino-Rack crossbars, part # RRVA137B-2. Then use legs # RRRLKVA and fit kit # DK339. These are nice aerodynamic crossbars to help eliminate wind noise. They'll also work well with the Thule Hullavator...
  view full answer...
• Comparing Rhino Rack Roof Rack Options for a 2013 Infiniti JX35
  The biggest difference between the two roof racks you referenced for your 2013 Infiniti JX35 is the style of feet used for the rack. The part # RR86GR uses a flush bar style of foot which means the crossbar stops before reaching the foot of the rack. The advantage to this rack is an OEM style look that would be maybe slightly less noisy. The part numbers # RRVA137B-2, # RRRLKVA, and # DK339 is a style of rack where the crossbar goes through the foot of the rack and comes out the other...
  view full answer...
• Can Roof Rack Bars on 2014 Infiniti QX60 be Adjusted to Different Locations
  While you can technically install a roof rack like the Rhino-Rack Vortex # RRVA137B-2, # RRRLKVA, and # DK339 where you want on the roof of your 2014 Infiniti QX60, Rhino-Rack has done testing and approved the locations of the crossbars for specific locations (which you can see in the attached installation instructions). If you were to install it elsewhere on your roof then the crossbars wouldn't sit level, there could be interference with something on your vehicle, and the 165 lb weight...
  view full answer...
• Roof Rack Recommendation for 2017 Infinity QX60 for Carrying Thule Hullavator
  For your 2017 Infiniti QX60 with a naked roof the Rhino Rack part numbers # RRVA137B-2, # RRRLKVA, and # DK339 is a confirmed fit. This would work well with the Hullavator part # TH898 as well so it would be a great choice.
  view full answer...
• Cost-Effective Roof Rack Solutions for a 2014 Infiniti QX60 and 2012 Infiniti FX35
  The roof rack systems will be different for your 2014 Infiniti QX60 when compared to a 2012 Infiniti FX35 as your vehicle has a naked roof but the FX35 should have raised rails so it needs a different leg system. Rhino-Rack also lists different crossbar lengths for both vehicles so we need to get you set up with 2 different roof racks. Here are my recommendations: 2014 Infiniti QX60 54" Vortex Aero Crossbars - # RRVA137B-2 2500 Series Legs - # RRRLKVA Fit Kit - # DK339 2012 Infiniti FX35 Malone...
  view full answer...
• Determining If Thule Evolution 1800 Cargo Box Fits 2016 Infiniti QX60
  I would be happy to help! With the age of your Thule Evolution 1800 Cargo Box, it has not been test fit on a 2016 Infiniti QX60 like yours but I can walk you through how to tell if it will fit. The 1800 fits crossbars that are up to 3-1/4" wide, and up to 2" tall with a crossbar spread of at least 23-5/8". If you have a roof rack kit like the Rhino-Rack Roof Rack using Crossbars # RRVA137B-2, Legs # RRRLKVA, and Fit kit # DK339 then your cargo box will work just fine. If you find your...
  view full answer...
• Roof Rack System For 2014 Infiniti QX60 With Naked Roof
  I did some research on your 2014 Infiniti QX60, and all of the roof rack systems we offer have the same length crossbars listed as a fit for your vehicle. At 54 inches, this allows the crossbars enough room to attach to the feet on the roof of your vehicle. We do not offer a roof rack system that has shorter crossbars. The Rhino-Rack Vortex system you referenced has aerodynamic crossbars with a smooth anodized finish. The strips in the bar top C-channels have ridges that reduce drag...
  view full answer...

Do you have a question about this Accessories and Part?