bing tracking image
  1. Roof Rack
  2. Inno
  3. Truck Bed Systems
  4. Square Bars
  5. 2 Bars
  6. 65 In Bar Space
Inno Truck Bed Cargo Rack - C-Channel Mount - Mid-Size Trucks

Inno Truck Bed Cargo Rack - C-Channel Mount - Mid-Size Trucks

Item # INRT102-65
lowest price pledge
Our Price: $224.53
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 15 lbs
Quantity: 
In Stock
Inno Truck Bed Cargo Rack - C-Channel Mount - Mid-Size Trucks Square Bars INRT102-65
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Videos

Need help with installation?
Locate installers near me
Square steel crossbars mount with clamps into the C-channels of your truck bed's track system to create a rack for carrying gear. The adjustable rack helps to maximize your cargo-carrying capacity by leaving your bed free for other gear. Lowest Prices for the best roof rack from Inno. Inno Truck Bed Cargo Rack - C-Channel Mount - Mid-Size Trucks part number INRT102-65 can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (6)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Inno Roof Rack - INRT102-65

  • Truck Bed Systems
  • Square Bars
  • 2 Bars
  • 65 In Bar Space
  • Inno
  • Non-Locking
  • Aluminum

Square steel crossbars mount with clamps into the C-channels of your truck bed's track system to create a rack for carrying gear. The adjustable rack helps to maximize your cargo-carrying capacity by leaving your bed free for other gear.


Features:

  • Cargo rack lets you carry bikes, cargo boxes, skis, or kayaks above the bed of your mid-size truck
    • Leaves your truck bed free for other gear
  • 2 Elastomer-coated, hardened steel crossbars serve as the rack's structure
  • Easy, clamp-on installation to your truck bed's C-channels - no drilling required
    • Tighten down aluminum clamps with included bolts
    • Fit Chevrolet, GMC, and Toyota
  • Powder coated steel plates help protect bed rails from scuffs and scratches
    • Also help distribute clamping pressure


Specs:

  • Application: most mid-size truck beds with C-channel track systems
  • Weight capacity: 110 lbs
  • Carrying capacity: 2 bikes
  • Crossbar length: 65"
  • Minimum crossbar spread: 27-1/2"
  • Limited lifetime warranty


Note: This cargo rack cannot be used on a truck bed with a tonneau cover.



INRT102 Inno Stays for Truck Beds - C-Channel Mount - Quantity 4

INB165 Inno Standard Square Steel Load Bars - 65" Long

Installation Details INRT102-65 Installation instructions

This Product Fits The Following Vehicles




Video of Inno Truck Bed Cargo Rack - C-Channel Mount - Mid-Size Trucks

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Inno Truck Bed Cargo Rack Review - 2020 Toyota Tacoma

Hello neighbors, it's Brad here at etrailer, and today we're gonna take a look at the Inno truck bed cargo rack system on a 2020 Toyota Tacoma. Now, as you can see here, we have our racks installed and they're nice steel construction with a black powder coat finish. So they look great and they're gonna hold up. You also have these nice brackets here that look pretty sharp, nice machine finished, good hardware, brackets, also powder-coated. And so overall, this is gonna keep your truck protected, but also give you the utility of the rack, whether it be installing bikes, which this can hold up to two with any square bar mounted bike rack, up to 110 pounds total. So if you need to grab lumber, a ladder, camping accessories, kayak, whatever you need, this is gonna do it for you and still allow for you to load stuff underneath and keep your truck bed closed, which is nice for your rear view camera, and also just keeping your stuff in the bed.

So talking on versatility, as you can see, we have a kayak loaded up on our Tacoma. We use the etrailer J-style kayak carriers, and it's a nice secure fit. The great part about this is you don't lose any of your usable space. So as you can see, the door still opens, no problem. So you have full access there.

You also don't extend that far off. Now this is a nine foot kayak, so if you're gonna be carrying one that's longer, you're gonna wanna make sure it doesn't extend too far. Otherwise you may have to have a flag on there to keep it legal. Now we did shift our bars down to accommodate this, but also that's part of the versatility of this. You can use those bars however you need them, assuming that the weight distribution's correct.

Another nice feature. When you're kayaking, you always bring your things with you. You still have full access to storage in your bed. Now the versatility of these bars is really nice because some of your larger accessories or things that you need to disperse the weight on, you can simply loosen this up and slide this on the C track, allowing you to make these wider apart to distribute that weight better. Having a truck is great for any anyone that wants to do any exploring and you can fit most of the stuff in the back.

Now, the problem is, some expeditions you might take will take up some space. Since this is just an extended cab, you're gonna use your truck bed, but if this is full, where are you gonna put your bikes or your kayak. And this is where this is gonna come into place. If you run out of space here, you can always move up and that's where you can store all your accessories, but not to the square bar. Now I will point out that this is not able to be used with a tonneau cover, but you're still gaining the same amount of storage that you would have under a tonneau cover and in space on top. So these crossbars are a nice black powder coat finish and they're made out of steel. So as long as they are, you would think they'd flex on the center. They don't, and they can hold up to 110 pounds or even two bikes, with bike racks on there. Hardware is also nice, very nice machine quality with good hardware. And plus the fact that a lot of this will prevent more plastic from getting scratched is awesome. So when you're not using this, you're not gonna see marks from this being left on it. So install of this rack is very simple. As you can see, we already have our front bar installed and we also have our next bracket, which we'll be putting the next bar on, but I wanna show you how to install the actual clip itself. Now, it's pretty simple. You can see you have a nice little handle here with this plate, and that's gonna slide in our C channel and that's gonna tighten it in and keep it in place. Also has some nice rubber here, which is gonna keep the plastic side of your bed from being scratched. You also have this spacer bracket and this is just gonna kind of keep this bracket in place once it's tightened down. And then we have our hex head bolts. So let's go ahead and we'll place this bracket kind of right here for now. What we'll do is, we're gonna put that little block in the channel. We might have to finagle a little bit with your fingers, but once it's in there, should stay in place. May loosen it too, if you need to. So now it just slides down, nice and smooth, as you can see, and it's gonna sit on this bracket. Now it's important before clamping this down, we're actually gonna measure it from our existing front bar to make sure that the spacing is proper. So to get a proper measurements for distributing the weight of whatever accessories you're carrying on the rack, you're gonna wanna make sure that you have enough room for an overhang. So from the edge of the bed to the middle of the rail, we have about 17 1/2 inches, and that's gonna allow for our accessories to extend out a little bit. Now from this one you're gonna measure from the center to the center. You're looking for 26 inches, so I'm gonna lock my tape measure in place and from center to center, you slide this down, right about there. So once we have that in place, you're simply going to press this bracket to where it's nice and taut against the truck, and tighten this down. Once that's tightened in place, you can simply put that up there for now. So to make installing the bar into these clamps simple, this pivots up to drop the bar in, or you can simply slide it out for nice, easy removal. So once you have that open, you can drop it in both sides. And before tightening your clamp, you're gonna wanna measure from each side to make sure that matches and that way, it's evenly laid out on your truck. But once you get your measurements, it's as simple as sliding this in. Make sure that groove actually sits in there, 'cause that can get kinda stuck back there, but you know you have a tight fit when it goes over there. Then take your hardware and tighten that down. Now your kit will come with the included hex key. So you have all the tools that you should need for the install. And then final step to top off the install, this little rubber cap that fits on the end. Not only gonna keep water and moisture out of this, but also if you're loading stuff on here, it's gonna prevent things from getting scratched as you load it on. So final thoughts on this rack system. I think this is an awesome option for someone that doesn't have a tonneau cover, but still wants to carry accessories and still be able to utilize the entire truck bed. Now you can also keep these installed and if you need to pick up, I don't know, say a washer or a dryer, you could slide these up and still have all that space in your bed. So you're getting the utility of the bars when you need them, but also the utility of a truck. So I think it's a win-win by going with this system. So that's gonna do it for a look at our Inno truck bed cargo rack system on a 2020 Toyota Tacoma..


Customer Reviews

Inno Truck Bed Cargo Rack - C-Channel Mount - Mid-Size Trucks - INRT102-65

Average Customer Rating:  4.8 out of 5 stars   (6 Customer Reviews)

Square steel crossbars mount with clamps into the C-channels of your truck bed's track system to create a rack for carrying gear. The adjustable rack helps to maximize your cargo-carrying capacity by leaving your bed free for other gear.

by:




by:




by:

Review from a similar TBC Rack in Roof Rack


Once I received the product it was very easy to install and was exactly what i was looking for. With trucks it is problematic to have rooftop racks and nobody wants to have possessions bouncing around in a truck bed. With this rack I can easily remove my bike, skis or Kayak with little effort and the cost was an added benefit. Great product!




by:

Review from a similar TBC Rack in Roof Rack


Love the product
Fits my needs perfectly
as a I have a Decked bed box system
Makes carrying my PA 14 much easier




by:

Review from a similar TBC Rack in Roof Rack


Overall it is a good product, but do not try to stand on it. It will serve as a good rack for equipment. I use it to carry my kayak and a fully loaded cargo basket. I would recommend anyone to buy it.




by:

Review from a similar TBC Rack in Roof Rack




6
6

See what our Experts say about this Inno Roof Rack

  • Are the Feet of the Inno Truck Bed Cargo Rack INRT102-65 the same as Part # INRT102
    The towers that come with the # INRT102-65 are the part # INRT102. The # INRT102-65 just comes with crossbars as well.
    view full answer...
  • Is the Inno Truck Bed Cargo Rack INRT102-65 Difficult to Install on a 2014 Toyota Tacoma
    The installation of the Inno Truck Bed Cargo Rack - C-Channel Mount # INRT102-65 for your 2014 Toyota Tacoma is actually very easy. If you check out the attached installation instructions you can see that you just need to place the plate at the desired location and then install the clamp. The last step is to install the crossbar on the clamp which is easily done via the top screws on the clamp. As you can see there is some assembly, but it comes in only 3 parts that are installed with...
    view full answer...
  • Will the Inno Truck Bed Cargo Rack Part # INRT102-65 Fit a 2017 Toyota Tacoma
    I spoke to Inno and they informed me that the Inno Truck Bed Cargo Rack part # INRT102-65 will fit your 2017 Toyota Tacoma. The track system has been relatively the same since 2005 therefore there will be no issue on your 2017. If you are also looking for a bike rack that will work with this system I recommend the Inno Tire Hold II Roof Bike Rack part # INA389 which is unique in that it only holds the bike by the wheels which is ideal for alternative frame bikes. I have attached a review...
    view full answer...
  • Most Affordable Roof Rack For 2017 Toyota Tacoma Naked Roof Double Cab
    The least expensive rack for your 2017 Toyota Tacoma is actually a truck bed rack: Inno Truck Bed Cargo Rack # INRT102-65. This simply installs into your truck bed's track system and provides a square bar setup for accessories. If you want a rack for your roof and not the truck bed then for naked roof with double cab, your most affordable option is Inno Square Crossbars - Steel - Black - 54" Long - Qty 2 # INB137 with the necessary Feet # INSUT and Fit Kit # INK729.
    view full answer...
  • Will Yakima Fishing Rod Carrier Fit Inno Truck Bed Cargo Rack
    Both the Yakima TopWater Rooftop Fishing Rod Carrier # Y04088 and the Yakima DoubleHaul Rooftop Fly Rod Carrier # Y04087 fit with square crossbars so they will fit great on the Inno Truck Bed Cargo Rack # INRT102-65. You will probably end up having a bit of either carrier hanging out the back of your truck though as the TopWater is 102" long and the DoubleHaul is 131" long. Normally these are installed on top of a vehicle so since this will be in the bed you'll likely need a safety flag...
    view full answer...

Do you have a question about this Roof Rack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality roof rack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate roof rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Lisa S
Written by:
Lisa S
Employee Thomas T
Video by:
Thomas T
Employee Bradley B
Test Fit:
Bradley B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.