Vitrifrigo RV Refrigerator and Freezer - 6.4 cu ft - Stainless Steel

Video Transcript for Review of Vitrifrigo RV Refrigerators - Stainless Steel RV Refrigerator Freezer - VT89RR

Hi, everybody. Andy here with etrailer. Let's take a quick look at this Vitrifrigo stainless steel RV refrigerator and freezer. Now this is a double drawer refrigerator and freezer combo that's really built around organization and convenience. So instead of one big door, this has two separate drawers, one for freezing and one for refrigeration. So everything has its place and it's going to be easier to access.

So one of the biggest advantages is this drawer design, and it's going to slide open instead of swinging out. That's gonna be especially helpful in those tighter spaces or built-in setups like in an RV, a boat, or compact kitchen. And giving you an overhead view, let me line this up here, I just kind of wanted do to see what it looks like on the inside. So this is gonna be our top drawer. You see we have a a rack here that you can put things that you want to be able to grab easily.

And moving down to the bottom drawer, we have much the same setup here. It's deeper, it's a little bit larger. The bottom drawer is going to be about 3.7 cubic feet, and the top drawer is about 2.8 cubic feet of space. So quite a bit of space for this unit, usable space, really. And you're gonna be able to set this up whatever way's gonna work best for you.

And one thing I wanted to mention while we're here is this has a venting option. So if you are not going to be using this for a while, you can actually slide this feature out right here, just like that, and that's going to allow you to close the drawer without closing it all the way. So that's going to allow this to vent. You're not gonna have to worry about mold or moisture buildup. It's not gonna smell mild dewy when you're ready to use this.

But when you're going down the road, you're not gonna have to worry about the door popping open either because this latch is going to keep it closed in this position to where it can kind of breathe. And then when you're ready to use it again, you're just going to slide that back in and then that's going to allow you to close that flush, just like that. Temperature control is going to be pretty straightforward. We have our thermostat here, so you're gonna be able to easily see and adjust your settings. And everything is really well-built. Obviously, stainless steel, so it's gonna look great. While we're here as well, I'm gonna just kind of give this a spin a little bit so you have a good view of all the angles. So the power supply is gonna be your 12 to 24-volt DC or 100 to 240-volt AC. You see we have our compressor here, the wiring here. Installation's gonna be pretty flexible. You can mount this in different positions inside or outside without needing a different setup. And just to go over some measurements with you, looking at the overall length, and I'm including the trim here, we're sitting pretty close to 29 1/8 inches. The overall height, and as you can see, I do have this on a floor dolly, so it is sitting a little bit higher up. But when you have this on the ground, the overall height from bottom to top is gonna be right about 34 5/8 inches. And then the overall depth, including what we have going on here in the back, about 24 13/16 inches deep. So overall, this is going to be a great unit to consider if it matches the specs that you're looking for, especially if you're looking for that, that drawer design. If you're looking for help with installation, on this product page, typically underneath the Photo section, we have a link that will take you to our installer locator. Click that link and answer the questions that it has for you and that locator will find an installer in your area that etrailer has partnered with to do the work for you. Well, again, my name's Andy. Thank you for joining me.