Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
You can enjoy your shower without the hose getting all twisted up or caught on your arm because of the 90-degree vacuum breaker. The vacuum breaker also prevents contaminated water from flowing backward into your clean water supply.
Features:
Specs:
The vacuum breaker on this shower valve lets you attach a handheld shower set (sold separately). A handheld shower head makes it easy to clean mud and sand off of hard-to-reach areas on kids, pets, and even shower walls. And unlike your old unit, the 90-degree design of this vacuum breaker prevents your hose from twisting, bunching, or getting caught on your arm. It also has an anti-siphon device that will prevent your dirty shower water from seeping backward and contaminating your clean water supply. The anti-siphon device consists of an air hole that will drain water back out of the hose.
This valve lets you replace or upgrade the shower valve of your exterior RV shower. Using the inlet shanks, slide the new valve in place through the mounting holes of the old, broken valve. Then hand-tighten the included mounting nuts, and connect the hot and cold water lines.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're going to take a look at the Empire Faucets white shower valve with this 90 degree vacuum breaker. And this is for your exterior RV showers. Now this shower valve here is going to let you replace or upgrade the shower valve that's on your exterior RV shower. We mentioned the 90 degree vacuum breaker right up here on top. This will let you attach a handheld shower set, which we do sell separately.
And what's nice with that is when you attach that shower to the hose to this, it'll prevent your shower hose from twisting or bunching, stops any backflow contamination of your clean water supply. As you can see, it is a dual handle design, has nice clear knob handles. This is a white plastic construction. It is an easy tote two hole installation, includes the mounting hardwood to install it. Now the inlet shanks, they do use standard male NPSM connections and they'll use the same mounting holes as your existing valve.
This is water sense certified. Now the distance between these inlet shanks right here is 4-inches center to center. Now the overall dimensions on this, the width 6-1/8-inches wide. The height from the bottom to the very top of the vacuum breaker is 3-inches tall. And the depth, if we go from the handle to where it mounts to the wall is going to be about 3-inches deep.
These inlet shanks add about an inch and a half if you wanna include those. But again, you can see your handles, hot and cold water. But that should do it for a look at this Empire Faucets white shower valve with the 90 degree vacuum breaker for exterior RV showers.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






John
7/23/2023
Still going strong. No problems.