Built for the on-the-road lifestyle of full-time RVing, this extra-heavy-duty, 26-mil-thick sewer hose offers maximum protection from crushing, punctures, and UV rays when emptying your tanks. 4-In-1 clear elbow adapter fits 4 sizes of sewer inlets.
Features:
Specs:
This sewer hose comes with everything you need to empty your holding tanks at a dump station. The extra-heavy-duty hose is made of 26-mil-thick TPE for maximum durability. The 90-degree elbow adapter prevents the hose from bending too sharply, and because it's clear, it lets you see when the tank is empty too. The elbow adapter also makes it easy to connect to the dump station with its 4-in-1 fit capability.
The included 4-in-1 elbow makes connecting the hose to the dump station inlet fast and easy. The adapter is designed to fit 4 sizes of dump station inlets. It easily slides into 3" diameter slip inlets, and it can be screwed into a 3", 3-1/2", or 4" diameter threaded inlet.
Also, the 90-degree design ensures that there isn't a sharp bend in the hose when you connect it to the dump station inlet, which makes for a longer lasting hose. And the clear plastic construction of the elbow makes it easy to see when the water moving through your system runs clear, signaling that your tanks are empty.
To hook up the adapter, slide or screw the elbow into the dump station sewer inlet, then connect the lug fitting on the end of the hose to the bayonet fitting on the adapter. It's that easy.
This RV hose is made of 26-mil-thick thermoplastic elastomers (TPE) to provide maximum durability when you're dumping your tanks. The material is puncture and abrasion resistant, so you don't have to worry about springing a leak if the hose gets damaged from being dragged on the ground. TPE can also handle both hot and cold weather. UV resistance protects the hose from sun damage, but the material also stays flexible in temperatures as low as -30 F. Finally, the wiring that runs around the hose helps it to retain its shape, even if it gets crushed or stepped on.
The swivel fittings on each end of this hose rotate independently. This means that, when you're screwing them onto the connection points, the entire hose will still lay flat. So when you're dumping your tanks, waste can easily flow to the sewer inlet. No twisting, no binding, no problem.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Valterra Viper RV sewer hose. This sewer hose lets you drain your RV's black water and gray water tanks at a dump station. It features the easy coupler. This is a four in one elbow adapter that makes it easy to connect to the dump station. It fits a three inch slip, three inch, three and a half inch and four inch threaded sewer inlets. It's a 90 degree elbow, so that really helps reduce stress on the hose by preventing it from bending at a sharp angle and it's a clear plastic, which allows you to easily see when your tanks are empty, or if you're cleaning out the tanks, it allows you to see when the tanks are clean because you can see right through it.
It's a nice design. Again, clear plastic lets you easily see when the tanks are empty or when your water is running clean.On this end right here, it features a swivel lug fitting. This rotates to ensure that the hose always lays flat when making connections. You can see right here that these two components easily connect to one another. Right there on that easy coupler fitting, we have an internal seal, which is going to help prevent leaking.
You can see how that can swivel. It ensures that our hose lays flat, no kinking or binding.On this end, we have a swivel bayonet style fitting that would easily attach to a standard three inch lug fitting on an RV waste valve. Again, it has the internal seal to help prevent leakage. Then, this is an extra heavy duty 25 milled TPE hose that's UV resistant and puncture resistant. It features wire reinforced design, so if it was to get stepped on or driven over, it springs back into shape pretty easily and pretty quickly.
It's a really nice design. It remains flexible in a variety of temperatures. It's been tested in cold temperature down to negative 30 degrees fahrenheit. When you're ready to use it, you can see how you can just extend it. It's gray in color with red accents.
Then, when you're done with it, it collapses for easy and convenient storage. This is a three inch diameter sewer hose. When fully extended, it has a length measurement of 15 feet long.That's going to do it for today's look at the Viper RV Sewer Hose from Valterra.
EXCELENT SERVICE
good quality
Everything was there and in good shape
Great quality product from a great reta iler!
good tough hose, good price, fast deliv ery
Excellent product and no better company to deal with.
Products arrived fast and in one box. All products were just what I ordered and arrived fast.
Great product
Excellent service. Great product. Shipped and received right on time
Works as it should, well made connectio ns
Very good. Easy to use and store
Good quality product that does what it is supposed to do.
It worked as designed and is very sturdy for the price.
Excellent product and service delivered on time great people to work with they will be seeing more of my business thanks
After a year in continuous service we are very pleased with the viper hose.
Do you have a question about this RV Sewer Hose?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.