To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These custom clips and pads let you mount Thule Evo Flush Rail or Edge Flush Rail feet on your vehicle with flush, factory side rails. Clips attach to a mounting bolt in the foot assembly and tighten together. Includes 4 clips and 4 pads.
Features:
Specs:
Secure, Clamp-On Installation
To complete installation, place the fully assembled rack on your flush rails and tighten the rack in place with the torque tool included with the feet. The inner and outer clips in each foot tighten with a single mounting bolt to ensure an even, secure grip on your rails. An audible click from the torque tool indicates the rack is secured properly.
Protection for Your Rails
The rubber-coated steel clips and molded rubber pads protect your side rails from scratches and abrasions. The pads easily slide onto the bottoms of each foot, and they're designed to fit the shape and contour of your vehicle's flush rails.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steven here with the etrailer. Today we're looking at a fit kit for the Thule Evo flush rail and Edge flush rail roof rack feet. And that's number 6195, sold separately. Now folks, these again are a custom fit clip and pad set to let you mount that Evo flush rail or Edge flush rail feet, again, sold separately, onto that vehicle with flush side rails. So check the fit guide, make sure you're getting the right parts for the specific vehicle you're looking for.
Now, the inner and outer clips are gonna tighten together, forming a nice secure grip on the vehicle, and everything here that's gonna be touching the roof top itself is all rubberized or has a rubberized coating on it so you don't have to worry about scratches, dents, dings, those kind of things. You got some different shaped clamps and bars here, or, you know, clips that are grabbing the side of the vehicle. And you got the different bolts here with the specific star security key there. And then you've also got a couple of these guys here that are threaded on one and they have the hex head on the other for tightening down. So again, folks, this is the fit kit.
And again, the molded rotor pads will fit the contour of that vehicle, and they're gonna give you a nice protected surface to grab and protect that roof from scratches and abrasions. So the molded rubber pads here, again, those fit the contour of that roof line. And again, you're gonna either have a flush or a factory side rail, and then these slide onto the bottoms of the feet. And then with that whole kit together, you would then get your roof rack kit. So again, folks, this is just a fit kit.
If you have questions about this or anything else, reach out to us here at etrailer, and have a good day.
Ratings & Reviews
This is a very solid and high-quality rack that's resistant to the elements. The crossbars are both functional and very stylish!
Fit kit recommended for my Q3 was easy to install and fit perfectly.
Imagine that…. Easy step by step instructions!!! Had it assembled and on the car in under an hour. Great product, great quality!
Originally ordered a Yakima system, but availability everywhere was virtually nil. Switched to Thule and ran into some of the same shortages with the supply chain, likely due to Covid. Took about a week to receive and it was the perfect part for my BMW X3.
Website is easy to use & is better at putting together the correct package than Thule’s site.
etrailer had all the parts in stock for my 2020 Kia Telluride.
Payment process was simple.
Received periodic updates from staffer on my order & could actually reply if needed.
Installing the roof rack went well. Estimate start to finish was about 2 hours. Found it best to really examine each diagram in Thule’s step by step instructions to get it all right on the first try.
Hardness part of the installation was getting the crossbars installed at the proper distances. A tailor’s soft measuring tape & some masking were great aids.
Easy set up, great roof rack. One small problem with installing the rubber strips, piece would not lay flush..
I opted to buy from etrailer instead of going direct. My foot pack and fit kit shipped very quickly and arrived in only a few days. This is the second time I’ve used them and both experiences have been great.
After searching unsuccessfully for support in the retrofit of my legacy Thule rack to a new car, I was pleased by the excellent support from Bailey B. She was methodical in her query and verification of compatibility in my non-standard application. The rack
Very pleased with order. Shipped fast, not damaged, all parts accounted for. Easy install, very sturdy, and attractive design. Slight wind noise but that was expected compared to not having a roof rack.
Assembled the feet this morning and clamped to the rails on my 2024 Mazda CX-30. Everything thing looked good. I wish they a seal for each of the slots in the bottom of the square rails to keep the water out when it rains. Don’t want them rusting. I’ve used Thule racks for a lot of years and have sealed the end caps to keep the moisture out. Worked out really well
Easy to install, took less than 30 min.
Perfect fit on a Volvo V60 CC.
No issues with a "trunk" mounted bike carrier secured to the rear bar. Yakima Frontloader also fit perfectly.
We bought a new vehicle that we already had several Thule accessories for. Purchased the fit kit for our 2021 Tahoe along with the Flush Rail feet and they fit perfectly. This product title says “EVO” but it also fits “EDGE”. I hope etrailer fixes this because it was confusing trying to find the “EDGE” fit kit which doesn’t exist.
Thule has great products, hands down, but Andy from etrailer and etrailer as a company are the best! Andy was so helpful, it was like talking to an old friend.
Easy to install; is strong fit;
Perfect fit and easy installation. Highly recommend for a lower profile rack. Also allows sunroof to vent on 2016 Lexus RX350. Haven’t driven with them on yet so I don’t know how road noise is at this time.
Everything fit like a charm!
Thule rack looks great on my Kia Telluride. The pieces took a while to get to me because they were on backorder but it's not etrailer, they were on backorder everywhere. I messed up a piece of the rubber while installing and etrailer sent me another one free of charge. Would definitely recommend etrailer.
there were minor changes to the fit kit i already had for the lexus ...seems like the Jeep fit kit could have worked with just the 4 plates and 8 screws rather than replacing the other 16 pieces. But it did install easily with a solid/firm fit.
Great roof cross bars for the Lexus RX450h ! Better and beefier than the OEM cross bars. Yes, these are more expensive (wish they weren't! Locks should be included in the base cost) They are solid and planted the XXL roof carrier with ease. Took a bit to center the roof carrier- so we could open the rear door without crashing into it. Only took a 3 mpg hit with the racks and carrier on the roof (@ +5 mph over speed limit on the highway) I really like the way they look on the vehicle. We're probably going to keep them up for snowboarding season. Keep in mind once they're initially installed- they're a snap to take down as well.I made a mark on the inside on the rails to make reinstalling easier.
Amazing roof rack. Integrates well with the Tahoe. Looks great and allows a cargo box and a long board to be mounted side by side.
As always, etrailer for the win. Excellent service,part arrived quickly - just in time for a last minute road trip.
Etrailer is the best! Great products and service!! Highly recommended.
This kit fit perfectly for my Jeep Grand Cherokee. It was a easy install. Enerything was included, including the torque "wrench" that was needed.
It took me a VERY long time to figure out what I needed to mount my Hullivator on my 22 Subaru Outback Limited. I bought the wrong parts on round 1, and finally after 2 yrs of frustration, asked AI what I needed. I don't entirely trust AI, but it got me on the right track. I asked the 'chat' person on etrailer about the AI suggestion, and the gal who helped me, Autumn, said the feet part was correct, but to use this fit kit. I ordered it immediately. Today was the day. Of note, this fit kit has specific parts for the front and rear passenger side and front and rear driver side. Pay attention to the photo directions!! The parts are different for each side. On my Outback, they mount at 69cm apart. The cladding and design of the Outback roof system leaves much to be desired, but this worked and I'm looking forward to FINALLY using my Hullivator.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.