Product Experts Available Now!
Call 1-800-940-8924
Adarac Aluminum Series Custom Truck Bed Ladder Rack - Matte Black - 500 lbs
(58 reviews)
Price: $633.60
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Adarac Aluminum Series Custom Truck Bed Ladder Rack - Matte Black - 500 lbs
Part Number: A34FR99UD
In Stock
$633.60
Retail:$704.00
You Save: $70.40
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (58)
- Q & A (0)
- Photos
Adarac Ladder Racks - A34FR99UD
Highlights
- Custom Fit for Your Vehicle: Installs with hardware that attaches to your truck's bed rails or stake pockets
- Handles Heavy Loads: 500-lb capacity (250 lb per bar) carries ladders, lumber, or kayaks.
- Tonneau Cover Friendly: Works with many inside-the-rail covers for secure, covered storage.
- Quick No-Drill Install: Foam-padded rails mount using included aluminum stake-pocket inserts.
- Flexible Setup: Uprights slide or remove along utility rails to fit different load sizes.
- Rustproof Aluminum Build: Lightweight matte-black finish resists corrosion and wear.
Features to know about
Haul Work Loads and Weekend Gear: Carries Up to 500 lbs
This custom Adarac Aluminum Series ladder rack gives you 500 lbs of carrying strength—250 lbs per bar—so it’s made for both jobsite materials and outdoor gear. You can load up ladders, lumber, or pipe during the week, then strap down kayaks, surfboards, or skis for a trip. Because the rack raises cargo above the bed, you keep your truck bed clear for other gear or tools.
Keep Your Bed Covered: Works with Many Inside-the-Rail Tonneau Covers
The rack is compatible with Access roll-up covers and many other inside-the-rail tonneau covers, so you don’t have to give up your bed cover to gain overhead storage. The contoured uprights sit neatly along the bed rails for a clean, aerodynamic look, and the rack framework doesn’t interfere with most in-bed toolboxes or other gear.
Adapt to Any Load: Slotted Crossbars and Utility Rails
Square crossbars have mounting channels on both the top and bottom to let you secure tie-downs or mount accessories wherever you need them. The removable rubber strip on top keeps cargo from slipping and cuts down on vibration. Matching utility rails also include mounting channels for optional tie-downs or load stops (sold separately), so you can adjust and secure your setup for whatever you’re hauling.
Quick Install and Easy Adjustments: No-Drill Mounting Design
Installation is simple with the included hardware—no drilling required. Foam-padded utility rails sit on your bed rails and use aluminum stake pocket inserts to create a solid base that protects your truck’s finish. The uprights slide or can be removed along the utility rails, giving you flexibility to move them closer together or farther apart depending on your load.
Built to Last: Matte Black, Rustproof Aluminum Construction
The rack is made from lightweight aluminum that’s rustproof and UV-resistant. The matte black finish on the crossbars and rails adds another layer of corrosion protection and durability for year-round use. With a streamlined shape and extruded aluminum framework, it stays sturdy without adding unnecessary weight or bulk.
Specs
Weight and Capacity
- Carrying capacity: 500 lbs (250 lbs per bar)
Dimensions
- Crossbar dimensions: 66" long x 1-1/2" wide
Warranty
- Limited warranty: 1-year
F3020162 ACI Adarac Aluminum Series Custom Truck Bed Rack - Aluminum with Contoured Uprights - 500 lbs - Matte Black
This Product Fits The Following Vehicles
- 2024 - 2027 GMC Sierra EV
- 2024 - 2027 Chevrolet Silverado EV
Ratings & Reviews
4.9
58 reviews
by:
L. Filak
07/01/2025
We bought the Adarac as a way to bring two kayaks along on trips while towing the travel trailer.
The vehicle is a 2022 Silverado 1500 crew cab short bed (5.8').
It works perfectly with a WeatherTech trifold cover in place.
As another review mentions, for the cover to open, the uprights need placed tight against the end caps and the base bars need mounted as far back as the rail pocket mounts allow for.
Because the factory bed side cap is plastic, a torque spec for the mounting bolts would be helpful to provide proper tightening without crushing the plastic support ribs.
This is especially important on the front mount where there isn't a split washer to gauge the pressure with.
We covered a few hundred miles on the first trip without anything loosening.
It was easy for two people to lift it off the truck in one piece and store it for the next trip.
I have shipped the kayaks a few different ways on different vehicles and this was the easiest.
Two kayaks fit side by side without leaning them on additional brackets.
The rack provides a non-slip rubber insert along the top rails.
There are two strap paths readily available at each crossbar.
One path passes through slots in the uprights and the other through the plastic end caps.
We used one path for the primary straps and one for the backup straps.
Both paths are easily accessible while standing on either the tailgate or the rear door sills.
The steel uprights required some touch ups due to shipping scratches.
We'll see how well the paint holds up over the long run.
The vehicle is a 2022 Silverado 1500 crew cab short bed (5.8').
It works perfectly with a WeatherTech trifold cover in place.
As another review mentions, for the cover to open, the uprights need placed tight against the end caps and the base bars need mounted as far back as the rail pocket mounts allow for.
Because the factory bed side cap is plastic, a torque spec for the mounting bolts would be helpful to provide proper tightening without crushing the plastic support ribs.
This is especially important on the front mount where there isn't a split washer to gauge the pressure with.
We covered a few hundred miles on the first trip without anything loosening.
It was easy for two people to lift it off the truck in one piece and store it for the next trip.
I have shipped the kayaks a few different ways on different vehicles and this was the easiest.
Two kayaks fit side by side without leaning them on additional brackets.
The rack provides a non-slip rubber insert along the top rails.
There are two strap paths readily available at each crossbar.
One path passes through slots in the uprights and the other through the plastic end caps.
We used one path for the primary straps and one for the backup straps.
Both paths are easily accessible while standing on either the tailgate or the rear door sills.
The steel uprights required some touch ups due to shipping scratches.
We'll see how well the paint holds up over the long run.
by:
Big Ben
08/02/2025
Great rack. Wasn’t too hard to put together but the instructions could have been more product specific. We have been looking for something for our R1T to carry our long Kayaks and other things.
by:
Brian
03/26/2025
chevrolet
Silverado
This product is solid and well built. Instructions were easy to follow. About 45-60 minute install. Looks good on my Silverado. Would highly recommend.
by:
Paul
07/26/2022
Real happy with this ladder rack. I ordered the aluminum series because the flat black series was not available at the time due to material availability. I used a good brand-name flat black paint and other than a few touch-ups, it's holding up well. The install was a little tricky getting the width right so I'd recommend following the directions exactly as listed in the instructions. My wife and I carry two kayaks, one a Pelican Catch 120 sit-on and one 10' Perception sit-in, with easy securing with Malone straps and no shifting nor sliding. This rack is solid and good looking. We especially like the fact that you can use it with a tonneau cover in place.
by:
JeffS
08/11/2019
This is a great, sturdy product. I purchased it to carry Kayaks and Canoes on my F150 and it's the only reasonably priced solution I could find that didn't require me to remove my Backflip bed cover. The only drawback is that it uses the stake holes in the bed to attach it and Ford covers the front ones up on the short bed version of the truck. If you have the long bed F150 you won't have any issues.
by:
Bill
03/15/2021
This has been a great ladder rack. I purchased the rack to carry a two person 13' Vibe Fishing Kayak long distances as we travel with our camper. The Adarac Rack is easy to remove when not in use and the rails mounted to the truck look good either way. I paired the rack with a Lamma Rack to secure the kayak. Together it's a great system. Highly recommend!
by:
Tanner
07/05/2023
Ladder Rack came in earlier than expected to start. Good looking rack once installed and time will only tell how it holds up, but it seems good and sturdy. Easy to install but had to take into account the bedcover and readjust the rails with the upright arm mounts attached a few times. I've got a tri-fold bakflip cover. Giving it 4.5 stars because I had to mount rails all the way back so I could clear the upright arms with the bedcover. Doing so makes the rail not sit over front stake pocket by ~1/4 inch or so. Overall, it works and is safe + looks good on the truck!
by:
Dino
07/22/2026
Great Customer service
by:
Jeff
01/19/2022
Tried to get this locally installed. They said there were none available and couldn't order it. Basically I left there feeling disappointed.
After a Little research I decided to try etrailer. The people there are great and exceeded my expectations. They ordered it from the manufacturer and had it shipped directly from them. It arrived before I anticipated it would and I did the installation myself. Great product..thanks
After a Little research I decided to try etrailer. The people there are great and exceeded my expectations. They ordered it from the manufacturer and had it shipped directly from them. It arrived before I anticipated it would and I did the installation myself. Great product..thanks
by:
Michael
07/17/2026
Great rack for sliding !
by:
Kris
06/24/2024
We have used our racks for hauling kayaks and it is excellent! We also use for hauling folding tables for camping when kayaks not needed. Easy install,easy seasonal takeout too! Great product for carbon pro beds.
by:
Amy
06/20/2026
2025
Chevrolet
Silverado 2500
Good product
by:
Russell
09/16/2025
Solid, easy to install, only thing nicer would be to have stainless steel hardware and to smooth out the welds in a few spots for a more professional finished look.
by:
Stephen
02/01/2023
I love this rack system. Easy installation and looks great on my truck. Steve.
by:
Jesus
12/12/2022
Super strong / easy installation 30min
by:
Jerry S
06/09/2019
The rack is perfect for hauling our Kayaks. I painted mine satin black before I installed it to better match my truck.
by:
Brett
10/04/2022
2022
Ford
F-150
Easy, clean install; fits great on 2022 F-150 with BAKFlip MX4 Hard Tonneau Folding Cover.
by:
Charlie
05/19/2022
Toyota
Tundra
It’s been a wonderful rack !!
Best i have ever had
And I have had a few 5-6 over the last 40 years
Most to haul canoes kayaks ladders long lumber plywood mattress and box springs
But ……I am having to elevate my canoes on a elevated extension Closed cell foam to increase my height so the bow does not rub and rest on my Tundra roof.
Can do
Love the rack !
Best i have ever had
And I have had a few 5-6 over the last 40 years
Most to haul canoes kayaks ladders long lumber plywood mattress and box springs
But ……I am having to elevate my canoes on a elevated extension Closed cell foam to increase my height so the bow does not rub and rest on my Tundra roof.
Can do
Love the rack !
by:
Anthony W
08/29/2024
I purchased it for my Rivian R1T the mounting supports for the uprights had cutouts for the tunnel and tailgate buttons. This is a good ladder rack. I bought it to carry ladders, long length lumber and pipes. Also it is easy to remove when not needed. The rails mounted to the truck look good with or without the uprights. It's a great system. Highly recommend
by:
John
05/05/2024
Looks great only thing was the directions really were no help so need to know little about it
by:
Roger W
11/19/2024
2024
Chevrolet
Colorado
The Adarac Aluminum Ladder Rack is a great product that's easy to install and looks great on a Colorado. Installation instructions say to remove the taillight housing to install the rear mount. You can not get to where the nut plate goes from there on a '24 Colorado. You need to reach up between the wheel well and where the taillight housing mounts.
by:
Michael
02/22/2021
2018
Chevrolet
Colorado
This is a what I wanted, I only gave it four stars because the install video and instruction pamphlet do not completely represent a 2018 chevy colorado, had to call adarac to see what the issue was! You have to remove rear tail lenses for install, not overly difficult, you are left with 2 additional mounting plates. No wording of this which makes you scratch your head! Also you have to figure out distance in between bed for long mounting plates! overall I am satisfied with product and would purchase again from etrailer. In final I did speak with customer service and there was a little phone tag, always friendly and supportive. Thank you
by:
Jesse
02/22/2019
2011
Ford
F-150
Love it! Holds my 14.5 ft kayak with no problem even with the 5.5 foot bed. Looks great on my truck!
by:
John
06/19/2021
I bought this model to fit/accommodate the weather tech trifold alloy bed cover. I had to set the racks at the extreme ends to open the bed cover (required some trial and error).
Very pleased with the rack functionality and the look with the truck.
Very pleased with the rack functionality and the look with the truck.
25
58
true
Show More Reviews
See what our Experts say about this Adarac Ladder Racks
Info for this part was:
Edited by:
Katherine B
Written by:
Alex H
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
3/26/2025
I gotta agree with you, Brian. It looks AWESOME. Would you have any tips or advice for anyone else looking to install this on their truck?