To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Prepare meals on the trail with this slide-out camp kitchen for your Bronco. Modular system holds a portable fridge and includes countertop with a storage compartment. Trays are easy to open and lock in place while stored to prevent movement.
When your weekend setup keeps turning into a pile of loose bins, this slide-out kitchen gives your cooking gear a dedicated spot in the cargo area. It keeps your portable fridge or appliance on the top tray, prep space on the lower tray, and cooking supplies in the storage compartment underneath. Instead of unloading half the cargo area just to find what you need, your basic cooking setup stays staged and ready to slide out.
Short stops work best when you don't have to set up a separate table before you can make food. The lower tray includes a countertop lid made from food-safe HDPE cutting board material, giving your prep surface a defined place right at the back of your vehicle. It's easy to clean and doesn't retain moisture, odors, or stains, so sandwiches, chopped ingredients, or quick breakfast prep can happen right where the kitchen is deployed.
Utensils, small cookware, and cooking supplies can disappear into bigger totes when they're mixed with the rest of your camp gear. The countertop lid lifts to reveal a storage compartment underneath. Keeping those smaller items inside the kitchen puts them close to the prep surface, so your meal setup feels more organized once the trays are open.
Rough roads can make unsecured kitchen gear shift around before you even reach the campsite. These sliding trays lock in place while stored, and the top tray includes tie-down points plus two cam buckle straps to help secure your appliance. Your cargo area stays more controlled in transit, and the kitchen is ready to slide out when it's time to cook.
This is a committed cargo-area setup, so it's worth thinking through how your rear space gets used when you're not cooking. The overall collapsed size is 26-9/16" long x 17-13/16" wide x 7-9/16" tall, and the fully extended length is 73". The kitchen bolts to the floor pan with included hardware, so once it's mounted, your kitchen has a fixed home and a predictable pull-out footprint.
The base kitchen handles fridge or appliance placement, prep space, and enclosed storage, but a fuller camp kitchen usually takes a few more pieces. Countertop extensions (sold separately) add more room for food prep, camping sinks (sold separately) give you a place to wash dishes after meals, and a MOLLE panel (sold separately) lets you store MOLLE pouches or RotopaX containers. Those add-ons let your setup grow past quick meals when you want more working space or storage options.
Ratings & Reviews
Great to use. Made good.
Product arrived, bent and damaged out of box. Box seem to arrive in good condition no indication of damage during shipping Top tray is bent and scratched slides. Don’t operate as smooth as they should. I will include some pictures to show damage I would appreciate a phone call from a customer service rep to decide what I want to do. Overall, the product is what I expected just not the quality thank you and look forward to hearing from you. Email response is fine also.
Fast delivery, and fit like a charm
I like the design and find it useful. Once again, there were quality issues with this unit. The first one I received had the slides that accept the extended table missing. Was not even mounted in there. Morryde sent me a replacement and I was eventually able to get everything installed an working
Fast forward several months and many miles on rocky roads and plain old pavement. I have had one rivet fall out. Was able to replace it with a bolt. I just now found that the driver side slide no longer locks when sliding all of the way out. Frustrating. I will see if I can fix it myself, but the pop-rivet assembly method does not make things simple. May see if Morryde will fix it under warranty.
It works fine. But, Morryde has quality control problems. Of the various components I ordered for the trail kitchen, every single one sans the molle panel had an issue. On this one,the part that goes closest to the tailgate did not have the right size holes. I had to drill them out to make it fit. Also, there was an alignment problem with the bolt that goes into the passenger side. I had to go to the hardware store to get a button head bolt that did not require the tolerance needed. Otherwise no matter what I did the threads would cross.
Very robust and well designed bolt-in kit for my MORryde Trail Kitchen. The instructions were good and included photos of each step. I had to trim the white spacers by 1/4” to allow them to fit with my factory cargo area carpet still installed.
Very well thought out design. Works great with the separately sold base plate. I used this with the my Dometic CFX 35 and it works great. The installation video was much needed, as the manufacturer provided guide is all wrong. The straps that come with the kitchen will work for any portable cooler that has handles.
My only question will be if this holds up to the many, many miles of rocky overlanding we do every weekend. I leaped for this alternative to Goose Gear’s custom kitchen that cost 3x and would get delivered after Labor Day. This one arrived 3 days after ordering. I’ve purchased many items from etrailer and they exceed all expectations in every encounter I have with their team.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.