Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Stay comfortable on hot afternoons with cooling that adjusts as conditions change, helping reduce temperature swings inside your RV. Soft-start technology lowers startup power demand for easier use with generators and inverter systems.
When your RV has been sitting in full sun all afternoon, the roof, walls, and cabinets can hold heat long after the temperature outside starts to drop. This Coleman-Mach AC gives you 18,000 Btu of cooling capacity, which is more than many standard RV air conditioners, to help bring the cabin back to a comfortable level. It moves air at 270 CFM, so if you are replacing an existing rooftop unit, that airflow number is worth comparing to your current AC, especially if your RV uses ductwork to carry cooled air to other rooms.
A traditional RV AC often cools hard, shuts off, then waits for the cabin to warm back up before starting again. That can make the RV feel too cold near the unit and too warm a few minutes later. Variable-speed cooling works more like cruise control for your cabin temperature. It adjusts output as conditions change, helping the RV stay closer to the temperature you selected instead of bouncing between warm and cold.
Starting the AC's compressor is usually the hardest moment for campground power, a generator, or an inverter setup. The included soft-start technology helps lower that startup demand by letting the inverter-driven compressor ramp up gradually instead of hitting full load all at once. That makes the AC more practical for RV power setups where the system can run the unit, but startup is the part that needs extra help.
Humid camping days can leave moisture collecting on the coils while the AC works to cool the cabin. The hydrophobic-coated coils are designed to shed water faster, helping maintain airflow and reduce the chance of freeze-up when conditions are right for icing. It's not a cure for every airflow or humidity issue, but it's a helpful design detail when the AC is working hard in warm, damp weather.
Road vibration, changing weather, and long stretches of outdoor exposure can be hard on your rooftop equipment. The powder-coated steel base pan gives this unit a durable foundation to help support long service life on top of your RV.
This is the rooftop AC unit only, so it needs compatible Coleman-Mach R32 interior components to complete the installation. That may include the correct air distribution box, thermostat, and controls for your ducted or non-ducted layout. Because R32 systems are not backward compatible with older Coleman-Mach setups, confirm your interior components before swapping the unit in. If you're looking for a complete AC system, check out Coleman Mach Everest Air Conditioner System w/ Distribution Box and Thermostat - White or Coleman Mach Everest Air Conditioner System w/ Distribution Box and Thermostat - Black.
Installing a rooftop AC means lifting the unit onto the RV, sealing the roof opening, and connecting it to the correct Coleman-Mach interior components. Staying with a compatible R32 setup can help keep the project more straightforward, but it is still a job where the right installer can make a difference. If you'd like help installing your air conditioner, check out our Installer Locator to find an installer near you.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer. Let's take a quick look at this Mach C Everest 18,000 DTU variable speed RV air conditioner with this black shroud. Now this Coleman Mach rooftop AC is going to be a great option to consider if you need serious cooling power for a larger RV or frequently camp in hot climates. With an 18,000 BTU capacity and a 270 CFM of airflow, this is built to quickly cool down an RV that's been sitting in the sun while its variable speed compressor is going to automatically adjust the output to maintain a more consistent cabin temperature instead of constantly cycling on and off. Now before we go any further, let me give you some measurements just so you have a good idea of the size. Looking at the overall length from front to back, we're sitting right at about 32 and a half inches long.
The overall width about 25 and one eighth inches wide. And the overall height about 12 and a half inches tall. This is going to work with your roof openings that are 14 and a quarter by 14 and a quarter inches. And this also features soft start technology. And what that is, is it's going to reduce the power surge during startup, making this easier to run on 115 volt power from a generator or inverter.
And that's going to, and to help maintain performance the evaporator coils have a hydrophobic coating that's going to shed water more efficiently, improving airflow and reducing the chance of the coils freezing up. Now as you probably know, road vibrations, changing weather and long stretches, stretches of outdoor exposure can be hard on your rooftop equipment. So this has a powder coated steel base that's going to give this unit a durable foundation to help support long service on top of your RV. And the wiring is going to be tucked away up here in the front. And I was just going to pull that out here real quick just so you can see.
So you're just going to pull this wiring down through the opening of your roof and hook it up. So I just wanted to show you that that was included there, a wiring harness. Tuck that back in there. So this rooftop unit is designed for both ducted and non-ducted Coleman Mach R32 systems, but it is important to know that it is only the rooftop AC unit that you're getting here. You're also going to need a compatible Coleman Mach R32 interior components like air distribution box, thermostat and controls to complete that installation.
So if you need more than just the AC unit itself, do take a look at the kit options that we have here at etrailer to make sure that you're getting everything that you need. Because R32 systems, the R32 refrigerant rather are not backwards compatible with older Coleman Mach ACs, it is worth confirming that your existing components are compatible before purchasing or replacing your unit. So again, that's why it, it would be a good idea to take a look at the kits that we offer to make sure that you're getting everything that you need that's going to be compliant with the new R32 refrigerant. If you think you might need some help with installation we have you covered there. On this product page, typically underneath the photo section, we have a link that will take you to our installer locator. Click that link answer the questions that it has for you and that locator will find an installer in your area that etrailer has partnered with to install this for you. Well again, my name's Andy, thank you for joining me.
Customer Satisfaction Score:
64% were satisfied with this product
36% of customers were not satisfied
Ratings & Reviews
Condition: Surface Scratches
Notes: Item has minor cosmetic scratches on the top of the shroud.
Condition: Badly Dinged
Notes: There is a huge dent in the side of the ac unit. Otherwise, new and unused.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Jerry B.
8/17/2026
I’m really sorry this hasn’t cooled your camper the way you expected. An 87-degree camper definitely isn’t the result you were hoping for. We’d like to help figure out what’s going on and see if there’s a setup or product issue we can resolve. Please reach out to us so we can troubleshoot it with you and help get this taken care of.