Video Transcript for Let’s Check Out the 1-1/16" Wide Continuous Hinge

Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this 72 inch long by 1 1/16 inch wide steel piano hinge. Now, this hinge will provide us sturdy, continuous support along the length of your cabinet, your door, or your panel. It is great for oversized doors, trailer doors, entrance doors. It'll provide more support than multiple small hinges.

It is a nice continuous design, so it will reduce stress on the hinge with use with heavier doors. Want to zoom in to show you up close. This will rotate 270 degrees for full opening and closing motion. You can see right now if we rotate it back, goes about 90 degrees back. And then if we go the other way, it'll go a full 180 degrees.

So again, you get a full 270 degree rotation. Now, this is a durable steel construction. Has a nice unplated mill finish on it. It is a weld-on or bolt-on installation. Now, to bolt it on, it will require drilling holes into the hinge.

And this hinge can be cut to your specific size for your application. This part is made in the USA. And we're gonna just give you the overall length. Take the tape measure, we'll go from one end, all the way to the other end is right at 72 inches or six feet total length. The open width, which is the position it's in right now, so the open width is gonna measure right at 1 1/16 of an inch.

The knuckle length, now, each one of these little sections is called a knuckle, so the length on one of those knuckles is right at a half an inch. And the pin diameter, in other words, the long pin that goes through those knuckles to hold the two pieces together, the diameter on that pin is gonna be 3/32 of an inch. But that should do it for the review on this 72 inch long by 1 1/16 inch wide steel piano hinge..