bing tracking image
  1. Fishing Rod Holders
  2. CE Smith
  3. Rod Holders
  4. Gunwale Mount
  5. 1 Rod
  6. Stainless Steel
Fishing Rod Holder - 360-Degree Clamp On - 1" or 1-1/4" Square Pontoon Boat Rails

Fishing Rod Holder - 360-Degree Clamp On - 1" or 1-1/4" Square Pontoon Boat Rails

Item # CE55108A
lowest price pledge
Retail:$88.48
Our Price: $66.37
You Save: 25%
Fishing Rod Holders
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.95 lbs
Quantity: 
In Stock
Fishing Rod Holders CE55108A - Gunwale Mount - CE Smith
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Light-duty rod holder clamps on 1" or 1-1/4" square pontoon boat rails. Attaches with 360-degree rotating base. Corrosion-resistant stainless steel tube and chrome-zinc alloy bracket. 1-5/8" inner diameter. Call 800-298-1624 to order CE Smith fishing rod holders part number CE55108A or order online at etrailer.com. Free expert support on all CE Smith products. Guaranteed Lowest Price and Fastest Shipping for Fishing Rod Holder - 360-Degree Clamp On - 1" or 1-1/4" Square Pontoon Boat Rails. Fishing Rod Holders reviews from real customers.
  • All Info
  • Reviews (1)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

CE Smith Fishing Rod Holders - CE55108A

  • Rod Holders
  • Gunwale Mount
  • 1 Rod
  • CE Smith
  • Stainless Steel

Light-duty rod holder clamps on 1" or 1-1/4" square pontoon boat rails. Attaches with 360-degree rotating base. Corrosion-resistant stainless steel tube and chrome-zinc alloy bracket. 1-5/8" inner diameter.


Features:

  • Clamp-on rod holder holds 1 fishing pole
    • Lets you fish hands-free and have multiple lines in the water
    • Great for square pontoon boat rails
  • Rotating base allows for limitless mounting options
    • Attach to diagonal, horizontal, or vertical rails on your boat
    • Point your rod tip in any direction
    • 360-Degree radius - catches every 15 degrees
    • Allen wrench is included for easy adjustment
  • Solid mounting bracket distributes pressure evenly to help prevent dents in your rail
    • Secures with 2 hex screws (included)
    • Constructed of chrome-zinc alloy to resist rust and corrosion
  • Plastic inner sleeves are included to help provide snug fit on the rail
  • Durable 304 stainless steel tube is rustproof and corrosion resistant
    • Polished mirror finish looks good on your boat
  • Gimbal pin keeps rod from spinning
  • Solid bottom with drain holes prevents water from pooling
  • UV-Resistant PVC liner protects your rod from scratches and scuffs
  • Easy, no-drill installation


Specs:

  • Application: square boat rails that are 1" x 1" or 1-1/4" x 1-1/4"
  • Length: 9"
  • Inner diameter: 1-5/8"


CE Smith pontoon boat rod holder fits onto square rails.

This durable clamp-on rod holder's mounting bracket is designed to fit onto square rails so you can enjoy hands-free fishing from your pontoon boat.


Rotating Base for Mounting on Horizontal, Vertical, or Diagonal Rails

CE Smith pontoon boat rod holder can be pointed in any direction.

The adjustable base on this rod holder rotates a full 360 degrees so that you can clamp the holder onto diagonal, horizontal, or vertical pontoon boat rails. You can also point the holder - and therefore your rod - in any direction to get your rod tip over the water where you want it.


CE Smith pontoon boat rod holder can be pointed in any direction.

To rotate the base, remove the backing plate to access the hex bolt underneath. Then use the included Allen wrench to loosen and remove the bolt. Turn the base to the desired position - the adjustment teeth allow rotation in 15-degree increments. Once you've reached your desired position, replace and tighten the hex bolt and reattach the backing plate. The base cannot be adjusted after the rod holder has been secured onto the rail.


CE Smith pontoon boat rod holder plastic sleeves fit between rail and mounting bracket

Two plastic sleeves are included that fit between the rail and the mounting bracket - one is used if you have 1" rails, the other fits 1-1/4" rails. They are square on the inside to fit around the square rail, and round on the outside to conform to the mounting bracket. The rounded perimeter lets you turn the rod holder to position it at any mounting angle you wish. The sleeves also ensure the holder maintains a snug fit on the rail.


Durable Construction and Protective Liner

The rod holder tube is made of 304 stainless steel, which is highly resistant to rust and corrosion, even when exposed to saltwater. The exterior is polished to create a mirror-like shine that makes an attractive addition to any boat.


CE Smith pontoon boat rod holder grips the rail tightly without leaving dents.

The mounting bracket on this rod holder is made of a solid, corrosion-resistant chrome-zinc alloy. Because the bracket isn't hollow, pressure is evenly distributed when the bracket is tightened to help prevent dents on your boat's rail.


CE Smith pontoon boat rod holder has drain holes in the bottom.

A protective, UV-resistant PVC liner keeps your rod free of scratches and scuffs, and a gimbal pin helps keep your rod from spinning. Plus, drain holes are incorporated into the bottom of the rod holder to help keep water from pooling.



55108A C. E. Smith Adjustable Clamp On Fishing Pole Holder for Pontoon Boats - Turning Base - 1" and 1-1/4" Square Rails - Stainless Steel




California residents: click here


Video of Fishing Rod Holder - 360-Degree Clamp On - 1" or 1-1/4" Square Pontoon Boat Rails

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for CE Smith Clamp-On Fishing Rod Holder Review

Adam: What's going on everybody, Adam here with etrailer. Today, we're going to be taking a look at some CE Smith Rod Holders. So we are going to have a lot of different options to choose from. Some are going to be made of aluminum, as you see here. And they are going to mount to either a horizontal bar or even a vertical bar, but then we're going to have another one that's going to have both. This is going to be made of a stainless steel construction, which is going to resist against rust and corrosion, just like the aluminum ones.

But inside this little shaft here, we're just going to take this cap off and it's going to be a little nut in there. And that's going to allow us to pretty much pick whatever angle that we want. I have it just straight up, but we are going to have 360 degrees of freedom to get that right fit for you guys as rods.So whether you guys are on the coast, saltwater fishing, you don't have to worry about the salt rusting your holders away. And also if you guys just decide just to keep the rod holders attached, where you had them, when you winterize your boat, you put the cover over it. It's going to get a little moist in there over the months that it sits.

You don't have to worry about it rusting away then either. So let's just go ahead and get to it. First one we're going to take a look at is the Horizontal Mount Rod Holder. This one is going to be looking for a bar about three and five sixteenths and circumference, and also it is going to have about 20 degrees of tilt. So this is going to be great for throwing a rod in.

If you guys are just fishing behind your boat while you're trolling along, or even if you just got a bunch of catfish bait, and you're just throwing something out there. This is going to just kind of angle it out over the water, give your rod enough angle.So it's not going to snap your line or anything like that. I usually have at least one rod in and I'm fishing with another one. So this is definitely nice. So you don't really have to worry about rods kind of flipping over because if you're at the Lake, it's probably a little, not necessarily the smoothest day out.

So as your boat rocks back and forth, this is going to stay put. The inner diameter of the tube is going to be about one inch and five eighths. And it is going to have a vinyl construction on the inside. And that's just going to protect your guys' frauds from anything from happening. And it does slide out too, which is very nice. At the very, very bottom there is going to be just a little bar. It's really just to prevent your guys' broads from going completely through.As you guys can see the rod that I'm using now, isn't that long. So it doesn't even hit that bar. But again for you guys that are saltwater fishing, if you guys' rods are quite a lot larger and that little bar at the bottom is going to help everything out. It does come with stainless steel hardware with the tool, which is nice, and this isn't going to rust away over time. So if you guys do keep it installed over the life of the holder, it isn't going to rust away in there, it's going to be easy to get out. It does have some silicone in there. So that is going to help it from cross-threading heating up and messing up your guys' hardware, and that's definitely a plus. Our second rod holder is pretty much the same exact thing. Same amount of angle, about 20 degrees has the vinyl liner on the inside with an interior diameter of an inch and five eighths.But this one is going to mount to a vertical bar, as you see here. In the bar we're really looking for, is going to be about four and an eighth inches in diameter. We want to make sure that we have the proper bar, just because as you can see, I don't have much more gap here to tighten it down, but it is nice and solid, but it is pretty close. So definitely go ahead and measure your guys bar before you guys go ahead and order one of these. A nice thing about it is the little hole right here. Actually, you can use that for just putting a strap through, if you wanted to put a strap through, maybe put it over your guys' rod here. So then if you guys are, you guys have a couple lines out, you don't have to really worry about maybe a big fish taken your whole entire rod out of the holder.Yes, it has about 20 degrees. So I don't really think it would go anywhere, but again, if you got a big old hog on the end of your line, it might do some damage. So with this, if you wanted to just go ahead and take a little bungee cord or whatever, doesn't come with the kit, but I really would suggest that it would just give me peace of mind, so I can just focus on catching fish. Unlike the other two rod holders that we just took a look at, this one is going to be made of a three-O-four stainless steel. And you can kind of just tell that there's difference, because we don't have any welt seams here. On the other two, we actually have some welds going in between the mounts and the actual holder itself. So that's one way to differentiate them, but both are going to resist against rust and corrosion over time.And they both have the nicing plated hardware, which are not going to rust away either. So that is definitely a plus. And they also look pretty good too. It's got a nice mirror finish to it. And I liked that. On the inside, we are going to have a PVC type insert, and that's just going to, again, protect your rod from any scratches or anything like that. We are going to be looking for a rail. It's going to have a circumference of about three and five sixteenths inches. And then also the interior diameter of this tube is going to be about an inch and five eighths. So it should fit all your rods perfectly. And also we don't really have to worry about finding a horizontal or a vertical bar, or even if it's not, we don't really have the best spot to do it, because we are going to have options with the 360 degree rod holder.I kind of like this one just because we have more options might as well, just because we actually did end up going on a couple of different boats to find the right fit for this and the boat you're seeing now is the one we're using. So definitely sometimes it's going to come up to where you really want to use a certain spot with the 360 degree, it's going to be a lot easier to be able to put it exactly where you want it. And now, as you guys can see right here, we're going to have a little bolt and this, we can use the same tool that was included. Loosen that up a little bit. We're going to be able to actually take this thing out and rotate it around however we want. To be able to get whatever angle that we want for our holder.So I definitely like that just because it's just going to make getting it to that spot that you really want. I know there's always a seat, when me and my dad go fishing that I always want and he always takes it. But with this, you can make whatever seat that you guys had to sit in a fish, the best spot in the boat. As you guys can see after I angled it the way I want. It's definitely got a lot better angle to kind of go out towards the back end of the boat. Cause usually either this one's going to be facing that way or someone up front is going to be facing and fishing out that way. So this way it's nice. So I would definitely recommend if you guys want my opinion to get the 360 degree, we have a couple of different ones to pick from.I just like it just because I can pretty much move it around to wherever I want it. We are going to have a lot of different options. We didn't use these options on the boat you see here, just because we don't have a bar with the circumference of these two holes here. So this one is going to want a six inch circumference bar to mount to it is a Vertical Mount and it is made of anodized aluminum. And then the other one is going to be pretty much the same exact deal. But this is going to be a little bit smaller for those bars around five and seven 30 seconds inches in circumference. So if you guys have an application for that, go for it, sorry, we don't have a inaudible 00:08:11 that's that big on this boat. So we didn't use it, but they are both going to have a 20 degree tilt to them.So it's going to not just stick straight up. Just depends on your bar obviously, and how you angle it. But that's just that. The ones you see here are going to be about 10 inches long, but the 360 degree mounts are only going to be about nine inches long and the 360 degree mounts aren't going to have this little rod down low here. So for you shore fishermen that are on the saltwater. If you guys have a gimbal rod, so the gimbal rod's going to fit right in there and actually kind of slide over that bar. So it's not going to rotate in the hole or whenever you guys are using it. So that's something to think about. And another thing is too, we we're using these rod holders on a pontoon boat, but most of the pontoon boats have square bars going all the way around.So the only one we could really use is this one, it's got this little insert in here, which is going to be perfect for your pontoon square bars or just square bars, wherever you guys have them. It does come with two replacements here. And again, it's just going to bolt right on and we are going to have the 360 degree tilt with it, which is going to be nice. It is right at a perfect 90 degrees. So it's going to be sticking straight up, but you guys can go ahead and rotate that on the bar to get whatever angle that you guys need. This is made of stainless steel and it does not have the gimbal rod in the bottom, but it does have a little breather holes too. So if you guys do leave it somewhat upright and rain gets in it, or even just water splashing from you, hopefully getting a big old fish.We don't have to worry about it puddling up in there and rusting away. So that's definitely good. All in all. I hope you guys enjoyed the video. Hopefully you guys got some good information from us. Hopefully you guys decide which ones you need. And honestly, I really do think this is if anything, a little bit of overkill when it comes to strength, these are going to be able to hold up to extreme fish. Hopefully you guys are catching some hogs out there, but even if you guys do, you guys don't have to worry about these things bending or breaking. They're extremely heavy duty and just leave them on your boat. They're going to be able to resist against all that rust and corrosion that you guys might go through, whether you're on the coast or whether you're just at a freshwater Lake somewhere.All in all, I would definitely recommend them. And hopefully you guys have a lot of use with them. If you guys do use them, take a picture for us, put it down in the website for us so we can see how you guys use them. Again. These we're the CE Smith Rod Holders and I'm Adam with etrailer..


Customer Reviews

Fishing Rod Holder - 360-Degree Clamp On - 1" or 1-1/4" Square Pontoon Boat Rails - CE55108A

Average Customer Rating:  4.0 out of 5 stars   (1 Customer Reviews)

Light-duty rod holder clamps on 1" or 1-1/4" square pontoon boat rails. Attaches with 360-degree rotating base. Corrosion-resistant stainless steel tube and chrome-zinc alloy bracket. 1-5/8" inner diameter.

- CE55108A
by:

These rod holders work great on my pontoon. Makes trolling a breeze. Would have given 5 stars but have had some chipping of the black material around the rim of the holder. The chipping does not affect the performance.


1
1

Ask the Experts about this CE Smith Fishing Rod Holders




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality fishing rod holders for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate fishing rod holder information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Chelsea B
Written by:
Chelsea B
Employee Alexander C
Updated by:
Alexander C
Employee Adam E
Installed by:
Adam E
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624