To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These 1,000-lb capacity truck bed rail tie down anchors stay out of the way when you don't need them and snap up when you want to haul. They give tie downs a better angle of pull than factory anchors and are easier to reach.
Features:
Specs:
Whether you have open stake pockets or pop-out rail caps, it only takes a few seconds to install these BullRing anchors. All you have to do is pop the caps off using a flat head screwdriver, insert the anchors into the stake pockets, and tighten them down with a Phillips head screwdriver.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this set of bull ring retractable truck bed stake pocket tie down anchors. These are heavy duty anchors that will attach to your truck bed's stake pockets and provide a tie down point to secure your load. These are designed specifically to work with your 1988 through 1998 Chevrolet and GMC C/K series pickups. So these are going to be very easy to reach, being that they're in your truck bed stake pockets. So they're gonna be much easier for you to get connected to than the factory anchor points inside your truck's bed.
They do have these durable stainless steel rings that will work with your S hooks or J hooks to make a nice secure connection there. These do have a weight capacity of 1,000 pounds, so they will provide that nice secure connection for you to tie your load down to. Because these are a stainless steel construction, they are going to resist rust and corrosion, and then our nylon lower body is going to help reduce sound. And as you can see, when it's sitting down in your stake pocket, this top portion is going to sit just above the rail caps of not quite a flush finish, but not much higher than your rail cap. The retractable design is going to allow you to easily snap the rings down for a out of sight retracted look, and then when you're ready for use, they can snap up in place so it's easier for you to get your S hooks and J hooks put in place.
And then you can just lower them down again when you're done with them. It's very easy to get these installed. All you have to do is remove the screws that attach the top bracket with the lower bracket. And that's going to give you some more room to naggle there so you can get this lowered into your stake pocket, kind of angling it down. And then once it's inside, we've got these side plates here that are gonna kind of act as an anchor.
So we'll pull up on that ring, and that's going to lift the whole system up so that it catches on your truck's sheet metal. So it has a nice solid connection there, and then once you pull it up, just reinstall those screws, and you'll have a nice firm connection to your truck. You are going to get four of these anchors with this set. So we'll give you four solid tie-down locations that are easy to reach so that you can get your load secured to your truck. These do come with a lifetime warranty, so if you we're to have any issues with them, you're more than welcome to reach out to us here at etrailer.com.
But I really think these are gonna gonna be a really nice addition to your truck, giving you that easy access to a nice solid, secure tie down point. And that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Easy to install. Durable. Good value. They pull up when you need them, then retract flush with truck bed rails when not in use. They’ve served me well as general purpose tie down points.
The ball ring tiedowns seem to be plenty strong, but we’re a little bit of a pain to install. Overall, they should work out just fine.
Had these installed professionally. They work great. No interference with trifold solid bed cover.
Relatively easy install.
However, there is a little slop between the plastic trim and the Pocket D-Rings.
Most likely Toyota had to be a bit different in their "standard" sizing.
The installation vdeos are great. I like how easy it is navigate the website for placing orders.
Good experience will buy from ertrailer again
Used in several equipment tie downs, excellent results
Look and work great so much easier then trying to find the bed hooks with bungee cords or ratchet straps
Great product! Makes tying things down a lot easier and faster! Thanks
Easy install. Snug fit and seem sturdy. Have not put to use at this point but will soon.
It’s a really cool concept and easy to install, except for all the extra plastic on my Ram.
Great product
I have not got a chance to use them yet but they do fit pefectly. So yes I will be using them with in the next 2 weeks because I am going to be moving things that need to be anchord down looking forward to it.
Great tie downs. Quick delivery and great customer service!
These do require you to cut/trim the plastic around all four stake pockets on a RAM. It wasnt hard to do with a dremel. Just be aware that you do have to modify your truck. Once installed, they look great.
Installed these on a 25 Ram 1500 today, used a dremel tool and a couple of different bits. Was tough to cut into the plastic on a new truck but the finish was worth it. These should work great moving forward
Great product! Easy to install. Unfortunately useful website info is lacking, for example: when trying to assess whether these would fit my truck with tonneau installed there was a statement about being compatible with some (or most) but didn't have dimensions so I could tell, and instructions tell me to go to bullringinstall.com although that site does not exist. On the install topic, I noticed that they were a mirrored pair - must be a reason. I decided to install with the logo readable from the rear which has the larger interior part toward the outside of the truck.
Anyway, attached are pics showing the tonneau (Weather Tech) and the Rings installed on my 2021 Silverado 1500 LTZ.
Product is great. The link to web site for installation instructions was not working. It took a little time but I figured it out.
I can't say much just yet, as the d-rings only arrived today, that's why only a 4 star review at the moment. However, they do look substantial, and installation was quite easy. For now I just need the rings to hold a tarp that covers items being taken to the local landfill, where the requirement is that every load be tarped. The rings low on the inside of the truck bed were difficult to reach once the bed had been loaded. Having these d-rings on the top rail should make it much easier to securely fasten the tarp. Assuming that it doesn't rain tomorrow I will find out as I have enough junk assemble to fill the truck again.
The Bullrings worked great. You should let people know that they are easily installed on top of a bedliner. I have a 2001 Toyota Tundra LTD that has a factory installed bedliner; I was worried that the Bullrings would not fit because of the extra space created by the bed liner and the body of the truck. But no problem, the Bullrings slid right in on top of the bed liner and they look great, too. I am attaching a photo for proof.
Thanks for reaching out. I am impressed by your product and your follow-up service.
I've been using these for a few months now. Installation was easy and the rings are nice and sturdy. My 2018 Ram 1500 only has rings in the lower corners of the bed, so these open up a lot of options as far as securing cargo. I would recommend installing the screws with some thread locker, as mine began to back out. They're easy to re-tighten, but it would be a pain if you were to lose a screw.
We ordered these for our 2017 Ram 3500 long bed. The package included 6 tie-downs for each stake pocket. The installation was a breeze! These are very well made and now give us a place to attach our cargo net for dump runs and use ratchet straps for furniture moving. Highly recommend these.
Stout and strong, just not U.S made
Easy installation and makes securing the load in the bed simple!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.