Most Popular Retractable - Manual for Ford F-250 Super Duty

Just installed this afternoon, so not a lot of experience yet. I installed by myself in about 1 1/2 hours. The instructions were clear and brief. I had a little trouble getting the front clamps in place, but that was due to the thickness of a brand new spray-in bed liner, it was pretty thick. Once everything was in and adjusted the cover works good and looks like it will keep most of the weather out.

LOVE IT! Easy to install in about an hour. Looks awesome on my 2019 F250. Highly recommend it and etrailer.

What I appreciate the most is this cover is low profile (works with my fifth wheel) and can be operated from the side and locked in position wherever I'd like. Just the other day I took note of someone with a different brand that required a rope to pull closed. I'm glad I went with the aluminum version as it feels and sounds solid. The finish has stayed great looking. After watching a few installation videos while waiting for it to arrive, the process went very smoothly. The only time I needed assistance was in lifting the assembled parts up onto my truck. Here are the things I wish were better/different: Front seal - the instructions state to trim the front rubber seal to follow the lines of the hardware (so there isn't a little exposed flap of rubber). Having done that, the small pieces on the sides have vibrated out into the newly empty space. This is a minor thing. Mounting system - I installed the mounts as instructed, and did not over-tighten things. A number of months later I spent the day exploring on some unpaved Utah backroads. The bumps caused all four of the mounts to let go, drop into the bed of the truck, and the whole cover system shifted around on the truck. I contacted etrailer and their advice was to tighten the mounts more aggressively and they'd replace the screws if I damaged them. I have not had the issue repeat itself. Locking Partially Open - This has worked very well until recently. I can have the cover 25% of the way closed while towing, protecting the items at the very front of the bed. However I now want to have the cover 90% closed and locked when I have a tailgate pad installed on my truck for carrying bicycles (and this is when the bikes are not with me). When I do this and drive around, the cover slides open a foot or two from when I've been hitting the brakes. I haven't tried to figure out how to correct this yet as it is a new issue. Overall I'm very happy and would buy the RetraxPRO again.

By far the best bed cover I’ve ever used. Well designed and built, & lockable. Performs flawlessly on my F-250.

Works great after a year. I did chip the paint on the tailgate end. Fast shipping buy it!!!

After I got all the parts, read the instructions three times had my brother help this thing was a job to put on harder then I thought it would be. After a lengthy time we got on looks really good on my 2017 F250 Super Duty. Would buy this again.

The only thing I don't like is that it is hard to slide open sometimes. It is tight in the rails so pushing it from either of the sides it get stuck. Many times I have to walk back and forth from side to side to push on it so it will open. But it does it's job.

This item was not satisfactory when I installed it, but it wasn’t bad enough for me to take it off and choose something different 3 years ago. Now, after just 3 years, this expensive tonneau cover fell apart beyond repair and is now useless. This unit was well cared for and never abused.

Firstly, Etrailer is AWESOME! I love you guys!! Unfortunately, this tonneau cover is terrible. I actually hate it. After installing it, it only really worked smoothly for about a month and then it's been a fight opening and closing it ever since. I've reinstalled it twice and it works a little better afterwards, but never smoothly. I truly regret buying it. If it wasn't so large, I would have tried to send it back.

I spent more time getting the cover aligned than assembling and getting it onto the truck bed rails. The instructions are very good. I had to adjust the top jaws of the all the rail clamps since I have the T-slot XR rail system. I used a thin piece of cardstock to check for unwanted clearance between the jaw and truck bed flange. Since I didn't have a very large drill bit, I used a Dremel sanding bit to enlarge the pilot hole that I drilled through the plastic bed plug for the drain tube. That worked fine. The cover looks great and seems to operate well on this first day of installation and use. The T-slot rails do not get in the way of using the hand-holes for the rear step bumper.

E trailer is great. But when the cover arrived and I installed it the cover had a hole in it or a small flaw

The Retrax Pro HR and Yakima Overhaul HD is a perfect combo and works well together.

Very happy with my Retrax Pro HR Tonneau Cover! Looks great, works great, fairly easy to install myself. Has been through several downpour rain storms and have never seen a drop of water in the bed after!

I love this cover. I had one on a different truck, but it had the rails that could be used for a bike, kayak or ladder rack. I thought I had purchased the same rails, but when received, found that it was not the same. I didn’t realize it until after I installed it. Wish I had noticed it earlier as the rails to replace are $500. Be certain you order carefully.

The cover was easy to install and looks fantastic

Very nice Tonneau cover once installed. The paper instruction manual is though to understand. Good thing I found an installation video that was a great help.

Great product, speedy delivery great follow up