# 1
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
Excellent. Be sure your axle bearing seals are not leaking grease onto the backing plate.
Brakes work great! I used a self tapping screw to ground the brake to the trailer. This worked really well and I didn't need to run a ground wire. The studs needed a trip to the hardware store to get some 7/16 by 40 pitch (fine thread) nylock nuts. All in all a nice brake setup.
# 2
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
Etrailer is great. I have been using them since 2014 or 2015 for various stuff. This order was for electric Dexter brakes - ten inch. Some other suppliers offer similar ones for half price but they are not as good as Etrailer. Auto-adjust (they call it Never-adjust) is very important. Also the shoes are cut nicer. One of the electromagnets failed - open circuit - first time that happened. I had 6600 miles on it. Curious failure. Recommended changeout is 12,000 miles anyhow so I am not real upset. When you're flying down a 9% grade in the Rockies you want the best brakes and the best tires. Get Etrailer. Get the largest wheel and highest load range tires that will fit your trailer from Etrailer. I considered modifying the brakes to disc. $2000 plus they are not maintenance free either. Nothing is "maintenance free". I could change out all the brakes and drums 7 times for that $.
I have a five and half year old travel trailer with electric brakes. I noticed I had a hub that was intermittently getting hot. I know a little about bearings going bad but realized it was probably the brakes getting old and hanging up. I decided based on the price of these assembled backing plates that doing this full replacement on all four with new tires was good insurance. I order the stuff carefully (including new nuts and washers) on Sunday evening. It was delivered to my house on Friday afternoon all in good order. I had already taken the wheels to the tire store for replacement and removed the hubs. Saturday morning I started working and by the end of the afternoon I had new brakes, regreased bearings, replaced seals, and mounted new tires on my trailer. I did change the bearings on the hub that was getting hot. Just new seals on the others. The information on E Trailer made it easier to order online than to purchase at a local trailer parts house.
# 3
Dexter Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
A year later still working as should would highly recommend
Got it with a fast turn around
# 4
Dexter Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
Good solid brake shoes, fit on perfectly, in fact the first problem free repair job I have tackled in months. The camper is as unusual as the photo is of Alabama weather.
E-trailer is a great company to deal with. The electric brake assemblies were exactly the same are the original which insured installation was smooth and easy. Support after the sale is unsurpassed. They follow-up after the sale with instructional video clips to insure there are no "hiccups". After installation of the new brakes, I road tested and calibrated the controller (a device that I previously purchased from E-trailer). E-trailer was referred to me by a friend. I will definitely use them again and will not hesitate to refer them to others. Lastly the assemblies are American made and the shipping was free, could not improve on service, product or value. Thanks
What our customers are saying:
"Great web site, excellent shipping service."