# 1
B&W Tow & Stow 2-Ball Mount - 2-1/2" Hitch - 7-1/2" Drop/Rise - 18K - Black
This ball mount is extremely heavy duty. I had a stock class IV hitch and aftermarket ball mount on my Ram 3500 SRW and it was bending towing a 14000 lb dump trailer. I upgraded to a class V hitch and this mount and it's working great. I have 6 trailers that I pull with gooseneck, 5th wheel and ball hitches. The only 1 that uses 1 7/8" ball is a little 5x8 utility trailer that I'm converting to 2" so I got the 2 ball instead of the 3. When turned sideways it works as a step to get into the truck but only if the tailgate is up. It doesn't stick out far enough when the tailgate is open. The reason for 1 less star is the documentation; you need more information to make the best choice. I originally ordered a different PN and it hung way too low bc is mounted under the existing hitch. To remove the stock hitch, you also remove the integrated mounting brackets for the bumper. I ordered a PN for a truck without a hitch and cut off the receiver tube with a torch. Also, I upgraded the 3 1/2" exhaust to 4" and now at idle the exhaust rattles on the much larger frame of the class V but a slight modification in planned to take care of that. Installation was fairly straighforward once I removed the original receiver tube.
Convenient. One thing bothers me about this hitch, and that’s the noise. It’s very noisy and rattles. I bought anti rattle clamp and the rubber silencers but still makes noise. Also it always looks pointing inward toward the truck, it always catches my attention when I do a walk around.
# 2
Flash Simple Heavy Duty 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 6" Rise - 18K
Needed a 2.5 inch shank since I was on the edge of my tongue weight limit with the adapter sleeve. This was a close to my 2 inch shank receiver so it was an easy choice. Great product and packaging and etrailer makes everything simple to find!
Used. Worked great. I bit sloppy and noisy but no issue with function. Easy to swap ball sizes. Worth the money. Would buy again
# 3
Curt Adjustable 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 5-1/4" Rise - 20K
The product was well described on the web site. The truck matching worked great and was easy to use. This hitch was very easy to order and the price was good. The delivery date was correct, it was easy to follow with the information provided. The hitch was as advertised, easy to install and easy to use. Great Job!
I have been completely satisfied with this product. Very durable, solid beyond my expectations. Whether towing 1/2 ton or 6 tons I have no concerns that the trailer and load aren't safe and secure. Would purchase again but won't need to as this hitch was built to last.
# 4
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
Still haven't towed anything with it yet but it seems very solid. I do think it will rattle some in the receiver because it is loose in my 2" receiver on my 2019 F150.
This hitch has worked out great for me over the last year. It’s very heavy duty and easy to adjust. I’ve hauled a 9,000 lb boat, long-distance on numerous occasions without issue. I also haul a landscape trailer on a daily basis weighing over 5,000lbs and haven’t had a single issue. Great hitch that was significantly cheaper than others and is very high quality. I’ve recommended it to several people and I wouldn’t hesitate to buy again. The only thing I would like to have now in a hitch is a tongue weight gauge, but it isn’t necessary.
# 5
B&W Tow & Stow 2-Ball Mount - 3" Hitch - 4-1/2" Drop, 4" Rise - 21K - Black
About the hitch I think it is wonderful. Here in California we have a stupid law that doesnt allow you to leave your hitch ball in when not in service.About etrailer the service is great and the staff is very helpfull.
Fast shipping product as described! Hitch seems to be well built.
# 6
Flash Simple Heavy Duty 2-Ball Mount - 2-1/2" Hitch - 10" Drop, 10" Rise - 18K
Looks fantastic! Easy to adjust. Works like it should. I would recommend this product. Only negative would be that I cannot lower my tailgate with this ball mount as it is tighter to the truck than most. I drive a 2018 Ram 3500
This hitch was much lighter than my last hitch. Height is easily adjusted.
# 7
Flash Strong Solid Steel 2-Ball Mount - 2.5" Hitch - 10" Drop, 9" Rise - 20K
Very happy with the hitch. Looked FOREVER all over for details when I got my new to me 2017 Ram 2500. This truck sits so dang high off the ground (4x4) I was worried about getting the proper range of drop for my different trailers. I used my 7x14 utility trailer as my baseline as it rides the lowest. From ground to bottom of my ball coupler is approx 16in. From ground to top of my hitch receiver is approx 25in. On the lowest setting my trailer sits ever so slightly nose totally empty. Check the pic with level. Once loaded I'm confident it will ride very nice. Plus I have all the range to move up for my taller trailers. Super beefy, seems well built, and I picked up the locking pins to go with. Etrailer as always had a great price and I've been ordering from them for years.
I have a 2018 Ram 2500 and was in the market for a hitch. So as usual I go and check out etrailer. I was initially wanting a 8 inch drop but couldn’t find a style I liked. I personally didn’t want aluminum nothing against them just wanted steel. Finding information sometimes can be difficult so this is my main reason for review. As for etrailer I ordered this on a Tuesday afternoon and was at my house by noon on Wednesday. I was expecting Friday possibly Monday for delivery. This hitch is heavy. Fits in receiver good also stays close to bumper for better handling of to tongue weight and also to save your shin pretty sure you run into this thing you won’t forget it. I haven’t towed with this hitch yet but very confident it will be no problem. I have included some photos to help. This truck is all stock. The only negative if there is one is with the hitch in receiver and you hit a decent bump it does let you know it is in receiver.
# 8
Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers for 3" Hitch - 6" Drop/Rise - 32K
This is the best receiver on the market. It will haul it!!!!
I have both ball and pintle hitch Trailers. That is why I bought this hitch. The hitch it self is well built but the Paint job is not that great . I have had it a year and most of the paint on the Shank ( another reason I bought it for the 3" shank to fit my receiver on my ford Superduty) is pretty much gone. The hitch it self still clanks around in the receiver .I wish there was an adaptor to fit over the Larger ball so that my pintle eye would not move around so much.
# 9
Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 3" Hitch - 3" Rise/6" Drop - 21K
u guys have pretty much everything I need plus prices are great and shipping really quick. Customer service and staff are very knowledgeable. Thank you.
Great hitch .. quality built.
What our customers are saying:
"You folks are fast. Thank you very much."