# 1
Gen-Y Hitch 5th Wheel to Gooseneck Pin Box - Auto Latch - Lippert 1621/1621 HD - 21K - 3.5K TW
This hitch reduced chucking very well, I have a 2004 3500 Dodge Ram 4x4 Conestoga riding truck with very stiff suspension, the torsion action of the hitch definitely helps when crossing bridges and pot holes. The 5th wheel is an older Keystone Copper Canyon that is in great shape. I Have 12K miles with the new hitch.
I love this hitch I put it on my 35’ Astoria fifth wheel it pulls great and the shock absorbers help with a smooth ride.we took a ten day trip from Ga to Maine last September and had no problems with this hitch. I guess the only negative is that it’s not as easy as a regular fifth wheel hitch to hook up by yourself but after a few times you can line it up ok. The best thing is that no big hitch taking up space in my truck bed just a ball
# 2
Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - Lippert 1621/1621HD - 30K GTW - 4.5K TW
The Gen-Y gooseneck has been excellent! I now have approximately 12k miles on mine and it rides very nicely with very limited chucking and handles rough roads very well. I’d highly recommend that you contact Gen-Y BEFORE ordering to ensure you get the correct load rating product. Gen-Y and Etrailer have provided excellent customer and tech support! This product definitely frees up your truck bed and does require a precise line up to hitch.
The Gen-Y hitch is very stout & well built. Fit & finish was excellent. Installed myself in about 30 minutes.
# 3
Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - Lippert 1621/1621HD - 30K GTW - 5.5K TW
This product is a chucking ENHANCER, not a chucking dampener. Additionally, despite what you have read, my experience with GenY customer service has been terrible. GenY will not support their warranty program, they will try to tell you everything is OK, when the fact is, their product is faulty and does not function to GenY product literature statements “Built-In Suspension Creates Up to 90% Smoother Ride”. I purchased the GenY executive hitch from eTrailer on 3/10/23, etrailer sent the wrong unit and to etrailer’s credit - they quickly took responsibility and replaced with the correct unit on 3/24/23. I installed on my DRV Elite Suites PS3 just in time to attend the SOITC rally at the Outer Banks on 4/13/23. When we left for this 750-mile one-way trip, the GenY load indicator was in the middle of the green zone, I measured the pin load at 5,200 pounds. Bedrail clearance was my reason for buying the GenY, it replaced a Trail Air on my DRV and a Reese 27,000-pound hitch on my 2022 F450. Bottom line, the GenY system provided no improvement in bedrail clearance, but did offer the ability to switch in different gooseneck balls to adjust for bedrail clearance. GenY states that a 1,000-mile break in period is required before the GenY torsion system is fully effective. My experience was that at 750 miles the torsion system on the GenY had sagged to it lowest point with the load indicator in the unit outside of the green, this also resulted in losing nearly two inches of bedrail clearance. It looks like it has a metal-to-metal stop so that the lowest the indicator will go is to the white lines outside of the green. I called GenY from the RV park and was told that the unit would not sag further. I purchased a Curt gooseneck ball which was 2 inches higher than the Ford ball to regain bedrail clearance having to rapid ship it to the RV park. Chucking became downright scary on the 750-trip home. As an example, chucking was induced every time my truck’s ten-speed transmission shifted up. Upon arrival home, I again contacted GenY customer service with a full expectation that GenY would replace the unit. Instead, here is their response: “I spoke with our QC Manager regarding your hitch. He said that you are in the correct unit and being at the top end of the green is normal after the break-in miles. As for the bedrail clearance he said that you would be able to lower the pin box down a set of bolts (with our pin boxes you are only required a minimum of 4 grade eight bolts per side) or use a B&W ball as they are roughly 1 1/2” taller.” This is unacceptable...
Without a doubt the biggest difference maker I have ever used in my 50 plus years pulling trailers. When my wife had to concede that the Gen-Y gooseneck hitch made such a drastic difference.... enough said!
# 4
Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - Lippert Turning Point - 21K - 3.5K TW
I have towed now for a few thousand miles since changing to this pin box and honestly wish I had done this years ago! It tows so much better than my 5th wheel box did! Feels more stable, no more bucking and so much softer and better feel when towing! Not to mention so much less hassle dealing with a 5th wheel hitch!
I have been well pleased and excepcetionally satisfied with the Gen-Y pin box. We just returned from Texas making a 3000 mile roundtrip and encountered multiple rough roads.There was none of the chucking that I experienced towing with the turning point 5th wheel. A gooseneck is much superior to a 5th wheel in my opinion
# 5
Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - Lippert 1116/1716 - 30K GTW - 4.5K TW
Great product. The fit and finish is perfect. The trailer tows so much smoother and the chucking is almost gone. The extra bed space is a great bonus.
Thank you Mike for the fast delivery. It is always a pleasure to shop at your store.
# 6
Gen-Y Hitch 5th Wheel to Gooseneck Pin Box - Auto Latch - Lippert Rhino - 21K GTW - 3.5K TW
Great finish, built heavy duty, I recommend getting the new bolts with it. Some old bolts were stripped. Installation took about 2 hours by myself. can't wait to hit the road.
Quality Hitch! Thanks etrailer for help on getting me the correct hitch for my 2024 Forrest river sandpiper 4002fb
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."