Most Popular Analog Display for 2020 Chevrolet Silverado 3500

the compressor has every thing to install although i did not like the wiring harness,its 10 ga. wire with relay wired to power which could be ok because its switched through ground but to tie a 10 ga. wire to a fuse panel to me is a problem. i called air lift to ask about taking the relay wire out of harness fuseing it in panel and hooking 10 ga.to power no one could answer my question they said someone would call me no buddy did,i hooked it to power through a 30 amp relay works great

etrailer customer service is the best! And they have quality products. I have purchased towing systems from etrailer in the past and always found them to be of high quality. They deliver their products very quickly. This latest purchase of air helper springs was damaged in shipment. When it arrived, the box was torn, covered in tape, and 3 of the 4 large steel brackets were missing. Roger of etrailer was extremely helpful, and quickly sent me replacement brackets. These just arrived today (and the package was intact!). It will take me a while to get the system installed on my truck, and I will write another review when I have the system working.

As always, items delivered quickly and just as described!

Super easy install without a lift. Second pair of hands makes it easier. I was pleasantly surprised when all bolt holes were on target. Took our time to ensure a good install. Hardest part is figuring where to put compressor (passenger side under bed) and where to mount command console in the truck (inside large glove box). Pictures will be sent when all complete and tested. Bad storm today.

Service and communication were excellent and friendly. The item was shipped promptly and tracking information was provided. I initially ordered an incorrect part, and when I called to get the correct one on the way, a return authorization and UPS shipping form for the incorrect part were provided immediately. Thank you.

I did not read the fine print that it doesn’t fit if you have an under bed hitch. Everything was sent and product looks great. Just can’t install it

the compressor has every thing to install although i did not like the wiring harness,its 10 ga. wire with relay wired to power which could be ok because its switched through ground but to tie a 10 ga. wire to a fuse panel to me is a problem. i called air lift to ask about taking the relay wire out of harness fuseing it in panel and hooking 10 ga.to power no one could answer my question they said someone would call me no buddy did,i hooked it to power through a 30 amp relay works great

I was very satisfied with this air compressor system. I used it in conjunction with the 7500 XL airbags to support my fifth wheel RV. The compressor appears to be of exceptional quality, it was easy to install and came with everything I needed. I liked the idea of the remote air intake filter. One suggestion that would make to improve the function of the air compressor, would be to incorporate a time delay into the activation system. When operating the bags at minimum pressure, without the extra load, every time the vehicle hits a bump and the airbags expand, the compressor senses the decrease and pressure and applies more air. After a few bumps, the compressor has inflated the bags to a higher pressure than they would normally be in the empty state. This makes the vehicle ride a little bit rougher. The way I compensated for this, I installed an off-on switch on the compressor electric supply line. That way, when the compressor topped off the bags without a load, the pressure would stay stable and made for a better ride. Other than that, I am extremely happy with this compressor system in every way.

The product seems to be great, I only have one problem, the 25' black air hose with fill connectors on both ends does not have any directions on how to connect to air pump its one lenght with no way to connect it directly to pump, any ideas or direction would be helpful, thank you Richard.

I recently purchased this compressor kit along with the AirLift Loadlifter 7500 XL air springs for my 2015 Silverado 3500. Installation for both is pretty straight forward but it did take me longer than I expected (about 8 hours total). They definitely help keep the ride height at factory designed levels & the auto leveling feature with the air compressor is excellent. I definitely recommend the wireless remote for the do-it-yourselfers as install doesn't require piercing the firewall to run wires for a switch. The wireless remote gives a digital easy to read screen that you can adjust while driving even. Overall I give this product a 5 star rating.

Works great! Routing air lines into the cab and finding a place to mount the controller was a bit challenging for my 2006 Chevrolet Silverado 2500HD, but the end result is very clean and useful. I should have installed this years ago when I originally put air springs onto this pickup truck. My primary use is to level the load and provide more support for my Lance camper. Adjusting the air spring pressure is much easier and quick now!

Click to Enlarge

Click to Enlarge

Click to Enlarge

This makes life so much easier. Do not have to drag out the little compressor and open the storage doors and do each side of the RV. Now when I am ready to roll, I just look at the gauges and can see how much air I have in each side. I can adjust for weight on the fly and even sometime if I need to raise the back of the RV a little to get into a site. Love it!

For the money, this set-up is hard to beat. I installed it on my 2002 Toyota Tundra TRD 4x4 along with a set of Firestone Ride-Rite airbags to aid in leveling out the truck when pulling large trailers. I ran into some issues installing the supplied gauge panel- in the tundra there is litterally no place to mount the panel aside from the dash pocket on the driver side. Unfortunately, this pocket houses my electric brake controller as I like it close by in case I need to manually override the brakes by the lever on the unit. My solution was to remove the lower, center dash panel and cut the holes to house the gauges. This proved to be no simple task as the srs airbag pcm is located right behind this panel- i had to trim the pcm mount, elongate the mounting holes in effort to slide the srs pcm back enough to allow clearance for the gauge. I also ended up using an angled trim from auto meter to aid in this as well. When wiring the lights for the gauge i tapped into one of the illuminated trim rings for the factory power outlets- this allows the gauge illumination to only come on when the headlights are turned on. I decided to mount the actual compressor under the center of the bed on a support rail using a custom bracket made of 1/8" steel plate as there is really not much room for it in the cabin and my storage cubbys under the seat are already full. The only downside to this compressor is that it takes a good while to reach 100 psi on the gauge. This is why I rated 4 stars instead of 5- Im sure the addition of an air tank would help tremendously. FYI- Fastenal carries the proper push fittings for 1/4" air lines- i needed two extra tee's (about $20 for both) as i wanted schrader valves to remotely fill it if the compressor decided to give up the ghost.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Fantastic information and service, very satisfied