Most Popular 10000 lbs Line Pull for 2019 Jeep Grand Cherokee

Love the look and versatility of this hitch. The 10,000lb pull rating was one key factor in why I picked this set up. This allows me to mount a hitch mount winch plate, allowing me to mount winch only when I need it. I also have a bike carrier that allows me to mount two bikes up front. Many different options with this setup. Great tongue weight rating too at 1000lbs. I even like the license plate mount which centers the plate on the bumper rather than having it set low.

I installed this on my 2022 F350 King Ranch to mount a motorcycle carrier. It is a great fit and a well made hitch. Install only required minor modifications and NONE which were not highlighted in the install video on the website. The video is excellent. Watch it before you order and you’ll have zero WTF’s. etrailer customer service is always great and this transaction was no exception. They are my go to for everything hitch related. Thanks, hope this helps,

I love this hitch for several reasons: 1) the receiver is inline with the cross tube, giving it the maximum strength 2) easy install 3) receiver is higher off the ground than most 4) front plate bracket is handy 5) allows me to mount my winch, and doesn't interfere with airflow

Review for truck front hitch receiver I finally Installed the front receiver hitch today, I pulled it out of its package and found all parts wrapped to the receiver hitch good call as there was a hole in the box. The license plate holder received some damage it was bent some. Installation. I reviews the video prior and read the instructions. Had to purchase a 4 inch hole saw and a torque wrench that added to the cost of the hitch. Installation was for the most part straight forward, when the video cuts from shot to shot I now know all the cussing and swearing are done during that time as it’s very difficulty to get the hitch in over/under the exiting hardware, solo installer took me 3.45 hrs to install, tight fit under the truck to maneuver under the truck. Bolts back into original tow hooks was a total Pain in the A$$ trying to hold up the hitch and the hooks while trying to maneuver the hold back in. (Had to take it out as I inserted on the wrong side) I will say that installation is doable by novice front yard mechanic but with a difficulty of 7 out of 10, trying to get the bolts torqued to specs is difficult due to clearance and angle of the bolts. Make sure you have deep well sockets because the new bolts for the hitch and long and a standard size socket will not be able to grip the nut as you tighten it down to specs. Put the bike rack on the hitch receiver and found that the hole that we drilled out to put the hitch in is not big enough. The bolt for the hitch goes in from the right and there was barely enough room to get it in the hole, used a wrench to tighten it but it was slow going, the other issue was that on the left side there is a hitch lock I struggled to get it on, but then could not reach in to remove the key. So final outcome was I had to drill out another 4 inch section of the bumper to get to the key. If your hitch has a bolt on bike rack like the swagman e-bike rack you want it to be secure so the bolt is a must this option may not be the best option. The bikes block the headlights so no night driving with the bikes on the rack. The handlebars need to be folded down otherwise the bikes will ride too high on the front and obstruct your vision. If I had to do it again I would have gotten the hitch that is lower and would not have to drill out my bumper, and it would have given me more visual clearance. I did take a shot drive with the bikes in front it will take a bit to get used to them being in the front as well as making wide turns while towing the RV that I don’t take out the car in front of me.

Overall fitment and function is 5/5, no complaint there. It's a solid unit and fit like a glove. My lack of 5 star review is due to the customer experience (no fault of etrailer). Box was broken, so parts were flying everywhere. It's one giant bag of hardware, nothing is labeled. After going through it all, one part was missing, but wasn't needed for my install. The instructions I got were for a different vehicle altogether. etrailer customer service was great to confirm I had the right shipment, and got me the proper instructions. The instructions contained multiple typos on the hardware, referencing a 200mm bolt that didn't exist, etc. Doing it in my driveway as an amateur, without a lift, and just hand tools, it probably took about 8-10 hrs beginning to end. Recommend setting aside a weekend to do it. Torklift video on YouTube is worth a watch also. It Torklift improved packaging/instructions, it's easily 5 out of 5 stars. Torklift can't be beat for quality.

Great fit, instructions and materials worked perfectly