Most Popular Engine Block Heater for 2018 Toyota RAV4

Expensive shipping getting to canada(Quebec) but it was fast enough.

Well this item installed on my 2020 Toyota RAV4 did fit but it is not as easy as with earlier models and located on the front left hand side (down low) instead of on the right hand side bank. I used the factory block heater installation instructions as a guide but found some of the steps unnecessarily (for example removing the air box). In any case be prepared to do a lot of it by feel because you cannot see the hole it slides into in the block unless you use a mirror and flashlight. The installation process took me about 2 hours.

The product wasn't a proper fit at all for the vehicle. I had to modify it by cutting the thickness on the plug end with a hacksaw, to go past the engine case edge. Created a flat spot. Otherwise it wouldn't insert properly into the cavity in the engine. It would have to be all one diameter if designed properly. Not sized or designed well. Now that it's installed it seems to work ok.

2015 Hyundai Sonata 2.4 install. Have to remove air intake, very tight to get it in just enough space. Had to trim a little bit to make it fit but nothing ever fits perfect. Picture say it all.

I needed a frost plug core heater for my tractor. The one I bought did not have my tractor as an application. Just autos and trucks. The measurements were exactly what I needed as well as the wattage. I called a rep to confirm that the measurements were accurate and took a chance and bought it. Exact fit, easy install and happy customer! Thanks Phillip for your help. I highly recommend e-trailer for parts, supplies and great customer service.

Heater is good but it didn't fit in the frost plug hole that had the existing heater in. This replacement had a longer element and it touched the inside of block no matter what angle i turned it and would not seal properly. I think if it was in one of the other frost plugs maybe it would work? I have ordered many other block heaters from here with no issues. Like I said prob fits in different frost plug location so beware have a plan b ready. Hard to give bad review at these prices

Install was a little tricky given the location for my vehicle 2012 F150. But other than that pretty straight forward. Packaging was good and product seems well put together. Only time will tell if it works well. I'm not in the cold climate yet. It also does come with the 3 prong as advertised.

Product is fine but, the installation instructions are terrible. Even contacting the manufacturer for the mounting instructions, terrible. Found the mounting place on YouTube. What's up with this?

Easy to install, but the heater cord passes to close of the exhaust manifold, they should provide a heat shield in the kit. Excellent product.

Shipping was very fast (2 days) from Florida to Boise.. I have not installed the block heater yet. I'm driving home to Alaska soon and I'll have my mechanic install it there. Required in Alaska for even for gas engines

80% perfect fit! The only thing missing is 90 degree angle for the power cord at the heater(like GM original) also the power cord is not long enough for 2017 Canyon! Otherwise excellent for the price!

Bought this for my old Ford Tractor and it works great.

Yet to install Shipping was prompt