Most Popular Premium - Single-Hook Jaw for 2018 GMC Sierra 3500

It's pretty heavy at 300 pounds. I had to rig a hoist so that I could install or remove from the truck. I installed the side plates first and had to adjust one of the locking tabs per the instructions. I installed the plates in the truck and then lifted the hitch assembly into place. After bolting hitch to the side plates, two of the locks on one side are too tight to remove. I'm going to drive around a bit before removing the whole assembly and adjusting the shims on one side.

Bolted directly to GMC’s factory 5th wheel prep. Nice to have the auto slide feature. No need stop, unlock slide, move the truck forward, re-lock just to make a tighter turn.

It's pretty heavy at 300 pounds. I had to rig a hoist so that I could install or remove from the truck. I installed the side plates first and had to adjust one of the locking tabs per the instructions. I installed the plates in the truck and then lifted the hitch assembly into place. After bolting hitch to the side plates, two of the locks on one side are too tight to remove. I'm going to drive around a bit before removing the whole assembly and adjusting the shims on one side.

Bolted directly to GMC’s factory 5th wheel prep. Nice to have the auto slide feature. No need stop, unlock slide, move the truck forward, re-lock just to make a tighter turn.

Shipping was quick , but was missing some hardware to assemble.

Great hitch, easy to use. I’d read reviews about the threads being powder coated so you can’t get bolts in. I preplanned and bought an extra bolt from the hardware store then cut slots to make a makeshift tap. This cleaned the holes perfectly and the hitch went together with no issue. Ours was shipped with no 27K blue nameplate which I still need to get from Reese. Beware that a special grease tip is needed to properly grease this hitch. Not the standard zerk fittings. Tilt the hitch to the passenger side when not in use to let the handle drain water.

It's pretty heavy at 300 pounds. I had to rig a hoist so that I could install or remove from the truck. I installed the side plates first and had to adjust one of the locking tabs per the instructions. I installed the plates in the truck and then lifted the hitch assembly into place. After bolting hitch to the side plates, two of the locks on one side are too tight to remove. I'm going to drive around a bit before removing the whole assembly and adjusting the shims on one side.

Bolted directly to GMC’s factory 5th wheel prep. Nice to have the auto slide feature. No need stop, unlock slide, move the truck forward, re-lock just to make a tighter turn.

Shipping was quick , but was missing some hardware to assemble.

Excellent build quality. NO issues with threaded holes being plugged. Hitch bolted together without issue.

It's pretty heavy at 300 pounds. I had to rig a hoist so that I could install or remove from the truck. I installed the side plates first and had to adjust one of the locking tabs per the instructions. I installed the plates in the truck and then lifted the hitch assembly into place. After bolting hitch to the side plates, two of the locks on one side are too tight to remove. I'm going to drive around a bit before removing the whole assembly and adjusting the shims on one side.

Bolted directly to GMC’s factory 5th wheel prep. Nice to have the auto slide feature. No need stop, unlock slide, move the truck forward, re-lock just to make a tighter turn.