# 1
Dexter Trailer Springs Over-Under Conversion Kit
Very easy to install. Be sure to weld the top of the axle as stated.
The lift worked out perfectly,I had the place where I bought the trailer install them because I didn't have a welder to weld the saddle mounts to the axle and that's a must for a safe installation,also I had the place where I bought the trailer do it because they had the capability to align the axle perfect to the trailer after the installation. The lift added approximately 5 inches to the trailer hight so I could install the off road wheels and tires.The lift didn't affect the handling of the trailer at all.
# 2
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
I upgraded my leaf springs to 4000lbs springs and needed longer axle U bolts and Quinn at etrailer was helpful getting the correct bolts headed my way.
These seem to be working ok but do not appear to be designed for use with the HD upgraded Moryde greaseable shackle kit that I purchased with them . You can see in the photos that they rub and bind
# 3
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
Ordered a lot of parts for a dump trailer rebuild in Sept. Didn't install some of the final parts until Christmas break. THEY SENT COARSE THREAD NUTS INSTEAD OF FINE. I ruined 2 u-bolts and need all 16 fine thread nuts. I'm outside 60 days so I was told I'm on my own. I've spent $5k+ on etrailer. I'll find some place else.......
U-Bolts and hardware seem to be good quality. Package was delivered when promised. Very satisfied with purchase. Will be buying from E-Trailer again.
# 4
Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles
Install wasn’t bad. Grand design welds a V bracket inside the spring hangers for more strength so that was my only challenge on install. This caused a problem on the center hanger as the spacer wouldn’t fit. Had to grind about a quarter inch off the spacer so it would fit as I could only bend the bottom of the hangers so much. Will be towing about 100 miles this weekend so it will be nice to hopefully not have broken drawers in the back of the trailer as well as shelves in the fridge door dislodged. I also did the X factor cross braces on the front and rear hangers for more strength. Will post back after we get more miles on it, but given all the other positive reviews I don’t think I’ll be unhappy.
What a great product. The difference it made in our ride was outstanding. You almost forget you are towing a 35 ft 5th wheel behind you. We travel from West coast to East coast over all type roads and this product made such a difference. Sorry we didn't have it installed sooner. Definitely made a differance and would highly recommend to all Rv owners.
# 5
Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle
I had a tech install the shocks on our 2019 Shasta Phoenix 37FE fifth wheel. He did an excellent job and now we experience a better ride and a lot less surprises when we arrive and open our camper door. Railroad crossing, terrible Georgia interstates, and ruff roads are allot smoother now with less bouncing.
Installed a year ago, I made a drilling template to help locate the frame mounting bracket screw holes. Installed a set on (2) fivers, spent average of 2.5 hours for total installation per fiver. Helped the ride of the trailer. Would certainly recommend the shock kit.
# 6
CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles - 7" Long U-Bolts - Zinc
The product themselves are quality however, the customer service and shipping is what was dissapointing. I originally ordered 4 items. I was told only one item was on backorder. Not a big deal. I checked a week later on the backorder and was told that they did not know when an item would come from the namufactuere. However, it was a different item from the first. So two items were not available and turned out to not be available. It was a lack of communication and I had to figure this out by calling after waiting a week and several misguided emails. Next was the packaging. It was all broken up and taped when I got it. Whoever packaged these items threw 4 heavy leaf springs and 2 sets of U-bolts into a box without securing them. They arrived but the two U-bolt packedges were previouly opened and sealed with masking tape and i'm missing all the nuts and lock washers from one package. The box could have come open during shipment but they were not secured inside the box at all, which led to the catstrophy inside the box. Due to all this, I will probably not order again from this site.
These 2 new spring sets replaced OEM Dexter set used by Keystone. They worked fine but appear to be a bit thinner steel than the OEM unit that failed on one leaf. I asked the etrailer rep and was told they are rated for my RV so we will see.
# 7
Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles - 7,000 lbs
I used these to replace the leaf springs and equalizers on a 20’ gooseneck cattle trailer that I rebuilt. The ride is great and the usual rattling and clanging of the trailer going down the gravel road is gone. So far I am very happy with the ease of installation and the performance of the suspension. I guess only time will tell about the durability of the rubber components in the long run.
Happy with the online ordering.
# 8
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Overslung Axle
I replaced the shackles, leaf springs and shocks on my fifth wheel. Man what a difference!
Well built product installation went well. Good I strong magnets very useful for marking of upper shock tower. And a angle indicator very helpful in alignment with spring base plate. Front axle spring angle is 35 deg. Rear axle spring angle is 30 deg. This was mounted on a 5th wheel toyhauler
What our customers are saying:
"very easy to shop"