Most Popular Trailer Brake Controller for 2013 Freightliner M2

Smooth easy transaction. Will definitely purchase for you guys again. Thank you

was sent the wrong cable initially - there are two that are VERY similar. Maybe order both? Or make sure you know which one you need.

We have had no problems with the brake controller.

Works good so far. It would be better if it had a 90 degree bend in the cable coming out of the 9 pin plug. right now, you have to create a loop to get it installed under the dash, and this is problem on many HDT because the the 9 pin ECU plug is near the steering wheel adjustment peddle or the clutch peddle.

Very professional easy to install. The protective covering insures the circuit breaker doesn’t get shorted out if something touches it. I used it to connect to the Deka jacketed 2 wire that ran to my 7 pole trailer plug (12 volt feed) on my rear bumper.

Click to Enlarge

This review includes the following items: Item #RED69FR - Wiring Harness, 30A Breaker kit and Item # ETBC7 Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat and Item #RED24FR Controller. I wanted to be sure I had everything. A local place Custom Coach on Pulaski Hwy, Baltimore did a fantastic job on the install, Sorry I can't remember the techs name. I have a 2018 Kia Sorento SX V6, AWD with 4 pin Tow Pkg. car rated for 5k/500# load. Trailer is a 2022 Palomino Real Lite RL-186. I've logged 2 trips so far 1 to NYS mostly highway and to Cass, West Virginia area. The controller adapted quickly, I went to a '5' to a '4' setting even in the mountains it was smooth no jerking. The one picture shows installation ubder the dash totally out of the way. It works great!

Exactly what I was looking for and needed ! It was delivered very quick . Actually I just ordered a complete wiring harness from you tonight . Your service and follow up is great

Purchased a Teckonsha Voyager brake controller and the ETBC7 install kit. The instruction an video were very clear and easy to follow. Installed on a 2007 Ford Ranger Sport. Tech support was also very helpful on the one question I did have.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I ordered two, one to replace a broken one and another to give me a second mount in another vehicle. So now I can move the controller between two vehicles in a snap. The brackets arrived in different packaging, one not Mfg packaging, and that one was missing the metal adapter mount. I did not complain since I didn't need it for the broken mount. I noticed these brackets do not use the same threaded plastic tabs and machine screws, but instead use self tapping screws. This might be an improvement but won't know until I use them for 4 years.

Works well enough but the brake controller can slide out of the mounting bracket if you bump up against it.