Summer Starts Here - Save up to 70%
# 1
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Excellent product, great service, I highly recommended etrailer .
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
# 2
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 3
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 4
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 5
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 6
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 7
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 8
B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 9
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 10
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 11
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
What our customers are saying:
"I'm thoroughly impressed with both the service that I received and the quality of the product that I purchased. The shipping was lightening fast and the hitch was so easy to install! You guys have really made my husband's 30th birthday one of the best he's had, Thank You!"