Most Popular Wireless Remote for 1990 Ford Ranger

Shipped in a short amount of time, call company and received help and a phone call back as promised, great job.

Decent plow for the price. I installed this DK2 Avalanche on a 2003 GMC Yukon 1500 with a Curt front receiver hitch 31302. If you have a side mount battery, you may need battery bolt extenders (Battery Doctor #30400) to make life easier. That said, the ring terminal connectors on the winch control box will be too small. Get ones that will fit the 3/8 inch stud and 12-10 AWG wire to replace the stock ones. Manufacturer instructions are not very helpful, but Graz's Garage has a great install video on YouTube. He installed his on a 2020 Chevy Colorado Z71. You can always count on a gearhead from Detroit. eTrailer is awesome at responding to concerns, too, and I'm glad I bought this product from them.

I've had this plow for over a year and still haven't had the opportunity to use it yet ( No Snow ) , assembly was easy enough for one person, like the wheels on the blade had to drill out the holes a little to get the pins to go in , and the stand in the back had to be cut off to keep it from hitting the back of the bumper and not going all the way down. Other than a few minor modifications seems well built.

Works great plows like a 1ton with a 6 k plow on it. Fast shipping easy assembly. Couldn't be happier

Great easy plow to use. The hardware that came in was missing a couple nuts and bolts. Had to run to the hardware store a couple times to get the proper bolts and nuts. The plow doesn't come assembled. So expect a good evening to build this unit. First two years was great and the scraping was good. Back dragging slacks but again a lot of plows do that. So it's not terrible but does enough. Just leaves 1/4 of snow behind. But pushing snow forward works and scrapes nice on asphalt or concrete. The battery that came with the kit for the wireless controller didn't last 1 month. So be prepared to upgrade that. But it's been now on my 3rd year, one of the springs failed on it and currently searching for the replacement. The plow itself has a one year warranty so of course it's past due now. Overall it works and it's nice. Wish I had bought the power left and right but the manual lever works too. Also the side markers prematurely failed too so I had to buy meyer yellow ones from fleet farm. Cost another $xx. But I will update this as time goes.

It has been working very well as we have actually had a decent amount of snow so far this year. took a little longer than I thought it would to assemble and mount it but after it was on it works great and looks good.

I bought this K2RAMP8219 snow plow to take care of small properties in my neighborhood. Had a mechanic install the electrical under the hood and I put together the parts as described in the instructions. Everything seemed fine. Hooked up the plow to the vehicle and it lifted fine and lowered fine. Soon as we got our first small snowfall I try to plow my back driveway and it wasn't enough snow to see how will the plow worked so I tried to remove the plow from the hitch and couldn't get the plow off. I tried moving the vehicle to all sorts of areas on my driveway and still would not unhook. Had to Dremel the plow bracket of the hitch . Then tried to get it back on and it wouldn't go back on. Called technical support and told them of this problem and they sent a new hitch and that didn't work either. Now the snow plow sits in my backyard and can't do anything with it.

We purchased the DK2 Rampage II snowplow in Nov.2015, and started using it in Oct. 2016. Now it's been a little over a year, and the snow plow stopped working. After careful inspection, we found out the winch installed in the plow is an used+defective one (inside screws and rubber washer are not in place). It would be great if all parts are new and without defect. What's worse, we tried to call the 1-800 on the instruction manual for ordering a replacement part, but never got any human being to answer the phone after trying for a week. Finally we found the phone # of the seller - etrailer from my old email folder. It would be more convenient if you could have placed your phone # on the manual so that customers can easily contact you in case of any problem. Thank you for listening.

I simply love it, it does everything I need it to do.

What a great package. All the bolts are in every hole so you don’t have to figure out where each one goes. Took a couple hours in the cold to assemble.

Melissa at E-Trailor was very helpful and service was good. DK2 sent us the wrong mounting brackets three times. Eventually I received the right parts to mount up the plow. After plowing with it multiple times, I miss the hydrdoturn capacity of my 60 year old Meyer plow. This DK plow will move snow but it is awkward and slow.

Worked great through year one.

For the money you can't beat it. If you're installing this on a 1998 Grand Cherokee like I was, make sure you get the extended crossbar. My mount was right up against the bumper and didn't allow me to install my electric actuator bracket, so I had to go out and pick up a cheap winch from Menard's. Overall the whole plow system seems to be holding up nicely, I plow an uneven dirt driveway and this plow and mount has taken a decent bit of abuse. Plus it makes this old Jeep look like it has a purpose again. In conclusion, this plow was an absolute headache for myself and my brother to install. That part aside, it's sturdy and it does a helluva good job.

Works heat.

I purchased a SnowBear Proshovel Snowplow and a 2" Draw-Tite Front Mount Trailer Hitch Receiver for my 2001 Ford Explorer Sport Trac. The front mount hitch receiver was a breeze to mount to my vehicle. Literally 15 minutes from start to finish. When the SnowBear plow arrived I was a little apprehensive, as it came in 3 separate boxes and some assembly was required. The directions included were phenomenal, easy to understand and took you through complete assembly step by step. This has been a wonderful experience and I could not be happier.