bing tracking image
  1. Accessories and Parts
  2. Rhino Rack
  3. Roof Rack
  4. Fit Kit
  5. 4 Pack
Custom RCP Fit Kit for Rhino Rack RC and RV Series Legs - Flush Rails
Special Savings on Select Rhino-Rack, Maxtrax, RockyMounts, & Tred Items.
Rhino Rack

Custom RCP Fit Kit for Rhino Rack RC and RV Series Legs - Flush Rails

Part Number: RR54RN
In Stock
$111.99
Retail:$139.99
You Save: $28.00
Accessories and Parts

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Upgrade your rig with the Rhino-Rack RCP Base Kit for Sportz, Heavy-Duty, and Pioneer roof racks. This fit kit secures to factory points on your roof - no drilling needed. Built from UV-stabilized nylon, it's tough and weather-resistant. 1-800-940-8924 to order Rhino Rack accessories and parts part number RR54RN or order online at etrailer.com. Free expert support on all Rhino Rack products. Great prices and Fastest Shipping for Custom RCP Fit Kit for Rhino Rack RC and RV Series Legs - Flush Rails. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (305)
  • Q & A (0)
  • Videos (1)
  • Photos

Rhino Rack Accessories and Parts - RR54RN

  • Roof Rack
  • Fit Kit
  • 4 Pack
  • Rhino Rack

Upgrade your rig with the Rhino-Rack RCP Base Kit for Sportz, Heavy-Duty, and Pioneer roof racks. This fit kit secures to factory points on your roof - no drilling needed. Built from UV-stabilized nylon, it's tough and weather-resistant.


Highlights

  • Custom-Fit, Flush Mount Design: Provides a seamless, low-profile look by attaching directly to factory mounting points on select vehicles.
  • Heavy-Duty Construction: Made from durable, UV-stabilized glass-reinforced nylon for long-lasting strength and all-weather performance.
  • Secure, Bolt-On Installation: No drilling required - kit includes all hardware for a secure, factory-style fit.
  • Compatible with Rhino-Rack Crossbars and Platforms: Works with Sportz, Vortex, Heavy Duty, and Pioneer roof racks, allowing easy rack system expansion.
  • Streamlined for Reduced Wind Noise: Integrated design minimizes wind resistance and helps keep your rack quiet at highway speeds.
  • Perfect for Adventure-Ready Vehicles: Ideal for SUVs and 4WDs, strong enough to handle rooftop tents, cargo boxes, and gear for off-road or overlanding setups.

Features to know about

Custom-Fit, Flush Mount Design

Designed specifically for select vehicles, this base kit ensures a factory-style fit with a sleek, low-profile appearance. By attaching directly to pre-existing mounting points, it eliminates the need for unsightly brackets or modifications.

Heavy-Duty Construction

Built to withstand the elements, the RCP Base Kit is crafted from UV-stabilized, glass-reinforced nylon. This ensures long-term durability, preventing cracking, warping, or fading over time.

Secure, Bolt-On Installation

Engineered for ease of use, this kit includes all necessary mounting hardware for a bolt-on installation. No drilling is required, making it a simple, hassle-free upgrade for your vehicle.

Compatible with Rhino-Rack Crossbars

Designed to integrate seamlessly with Rhino-Racks Sportz, Vortex, Heavy Duty, and Pioneer roof racks, the RCP Base Kit offers unmatched versatility for various cargo needs, from bikes and kayaks to rooftop storage solutions.

Streamlined for Reduced Wind Noise

Unlike bulky roof rack systems, this base kit is aerodynamically designed to minimize wind resistance, reducing drag and noise, ensuring a quieter ride at highway speeds.

Perfect for Adventure-Ready Vehicles

Built with durability and strength in mind, this system is capable of supporting rooftop tents, heavy cargo boxes, and all your adventure gear. Whether you're hitting the trails or the open road, this kit has you covered.



RCP89-BK Rhino-Rack RCP Base Kit - Flush Mount Roof Rack Fitment - No-Drill Install - Works with Sportz, Vortex, Heavy Duty, and Pioneer - Durable UV-Stabilized Nylon

Installation Details RR54RN Installation instructions



Video of Custom RCP Fit Kit for Rhino Rack RC and RV Series Legs - Flush Rails
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Rhino Rack Custom RCP Fit Kit - RR54RN

Hi everyone. Steven here with Etrailer. Let's take a real quick look together at this custom RCP Fit kit for the Rhino Rack RC and RV series legs with flush rails. Now folks, again, this is a custom fit. It does need sold separately, the rest of the pieces to make up that whole kit. So obviously the legs, the crossbars, those kind of things.

Again, this is just the custom fit kit itself. And this will provide a seamless, low profile look because this will attach directly to your factory mounting points on the vehicle. And it is made from durable UV stable glass reinforced nylon and metal, depending on which part we're looking at here. And that's gonna give you that durability, long lasting strength. And also it's not gonna rust or corrode or anything like that.

It's a no drilling application. You're gonna get all the hardware as you can see, and this is what we considered factory style fit again, on everything. So it's gonna look oe, it's not gonna look like aftermarket. Again, compatible with Rhino Rack Crossbars and platforms alike. So whether it's Vortex, heavy Duty racks, pioneer roof racks, this will be a great option for you.

Now, as always, if you have any questions about this or any other products, reach out to us here at etrailer.com. We're more than happy to assist you. I'm Steven. Thanks for watching.

Ratings & Reviews

4.6

305 reviews
5 Stars
(239)
4 Stars
(36)
3 Stars
(12)
2 Stars
(8)
1 Star
(10)
Review Sort Icon
by:
Installed on a 2025 Honda CRV with vortex aero bars that I used to have on another car. Feels solid enough to lift the car with. I love this rack.

Note that eTrailer (or Rhino Rack, not sure) recommends spacer blocks for the rear bar on CRVs, to lift it a little higher and make the rack more level front-to-back. Otherwise there's a bit of a slope to a canoe or kayak due to the slope of the roof profile. The Honda factory bars don't adjust for this and they carry my boat just fine (other than being kind of wimpy), so I don't think the spacers are needed for the Rhino Rack, either. Maybe just for aesthetics. I did not buy them.
by:
by:
While the fit is excellent on these feet, and the finish seemed good to start, after 2 years they have corroded and bubbled underneath the black coating. For the price, I expect them to last without corroding/finish failing for longer than that.
by:
Working great to mount my crossbars and kayak rack.
by:
We had been shopping around for roof options for our new 2022 grand Cherokee, when we came across this. For us, the OEM mopar crossbars were ugly - extend about 6 inches from the roof. These are very low profile, and insanely sturdy. Additionally, installation is crazy simple.

The only recommendation we have that differs from the instructions - we used the rear set of mounting holes on the factory rails. Using the front set of holes as recommended by the instructions for cross bars meant that ski racks would be too close together, and the ski bindings would not fit. Other than that, very satisfied!
by:
Purchase for a 2019 Jeep Grand Cherokee, black rails. Perfect fit.
Jerry profile picture

Jerry

3/20/2026

After a year, still happy about this.

by:
These Rhino-Rack products are solid. Installation was quite simple. It took me no more than 2 hours from taking off the OEM rails to getting the crossbars to tighten down.

Keep in mind that these legs were designed for the Toyota Prado (it even says so on the installation guide). Once you remove the Lexus OEM rails, you will notice a groove, about 3/4" deep and 1-1/8" wide, alongside the roof. If your GX does not come with the OEM rails, the grooves might already be covered up by the factory drip trim pieces (Toyota PN 75557-60050, 75555-60030). This Rhino rack kit does not come with any hardware to cover up the grooves. I was told they would not cause any leaks because the mounting points are tightly sealed.

But if you have severe OCD like me, those grooves will be bothering you (even though you can't see them). Instead of paying over $xxx for the OEM trims pieces. Fill them up with some 3/4"wide 3/8 inch thick insulation tape, then tape a strip of 1" wide, 1/8" thick neoprene rubber strip on top. The end product looks just like OEM. I hope my simple idea will help other fellow OCD survivors.
by:
I searched a lot of websites before finding what I needed on etrailer.com for my 2012 Suzuki GV. I was looking for the proper mounts to install a Kayak rack system. Because my vehicle has a built in rail system it was very confusing what was needed. Thank you etrailer for hooking me up with the appropriate parts for the Rhino system, it worked great!
by:
Everything came promptly, no issues. Everything fit and the videos from eTrailer are a great help!
by:
Great item, pretty easy to install. I posted a longer review for the full setup on our 2019 Highlander with 2 biggish kayaks under reviews for the rack pillars, Item: RRRCL4. When fully tied down, we used hood loops front and rear for both boats.

Great service from Carol C.
by:
I AM SO PLEASED W/MY PURCHASE AND THANKS TO ETRAILER THE WHOLE PROCESS OF SELECTING WAS MADE EFFORTLESS W/THE STAFF ONLINE AS WELL AS VIA PHONE.
THE VIDEOS ARE INCREDIBLY USEFUL AND SO PRECISE AS TO INSTALLATION AND IN HELPING TO CHOOSE THE CORRECT ITEM FOR THE PARTICULAR AUTO DRIVEN. THE REPRESENTIVE, NICOLE WAS VERY KNOWLEDGEABLE AND SO CONCERNED TO GIVE YOU THE BEST SERVICE POSSIBLE. ETRAILER...PROFESSIONAL....TOP VALUE....A PLEASURE TO DO BUSINESS WITH.
by:
Love etrailer. They always have anything and everything you need and always at a great price. Also great videos and tutorials to help with your DIY install! Salvaged my old Rhino Aerobars with a new Rhino roof kit from etrailer for my Bolt.
by:
Well made parts, shipped quickly. I was able to install the rack with no problems by following the instructions. Good choice if you want a quality roof rack for $xxx less than a comparable Thule or Yakima.
by:
Price, Quality, communication, Shipping Speed. Everything about this is excellent!
by:
Fitment is good, did not come with security capscrews even it included a security wrench. The rack can be removed with allen wrench.
When rack is in place, I cannot use the sunroof on 2023 Buick Enclave.
Otherwise, it works fine!
by:
Item arrived on time.
by:
Perfect fit. Mounted easily to aftermarket roof rails.
by:
Terrible hardware. Screws broke inside fixed mounts twice rendering while system completely useless
by:
Looks amazing, and was super easy to install.
2021 Jeep Grand Cherokee L 4x4 Limited
by:
Product arrived earlier than expected with all parts. A little work to install but everything fits perfectly. After I dry fit the parts and then tightened the sliders to the cross bars I attached the rack to the mounting brackets on the roof using a 10mm wrench. It was easier access than trying to use the allen head wrench. It's on with a solid fit and I love it.
Doug profile picture

Doug

11/10/2022

Very well but takes a 15 minutes to take on and off.

by:
Two stars because the provided hardware interferes with the factory rails when using the provided cover plates (to be installed when you remove the cross bars & towers). Had to source my own 12mm long cap screws because provided 16mm were too long. Otherwise works as advertised.
Jenny N. profile picture
Etrailer Expert

Jenny N.

3/9/2022

I reached out to the manufacturer and it was the first time that they had heard of this being reported.

by:
I purchased the Rhino Rack roof rack as an alternative to the factory installed products and the more popular Thule and Yakima brands. The Rhino Rack is solid and sleek and is largely silent while driving (if I have the roof open you can hear a soft whistle). Not only does the rack look fantastic, but the non-slip top and the strong bars make carrying things on top a real pleasure.
by:
The Rhino rack for my Rav4 hybrid fit perfectly and has been used extensively for carrying whitewater and touring kayaks since installing it one year ago.

etrailer videos were helpful while I shopped for alternatives to Thule and Yakima which did not offer the specific feet I needed to install their racks.
by:
Update to my review: etrailer sent additional strips to set into the gaps on the bottom side of the rails and there is no longer any whistling, so I've rerated my purchase to Excellent. I'm not sure if the strips for the bottom side (the side that faces the roof of the car) should have come with my rails to begin with or if they need to be purchased separately (etrailer sent them to me at no charge after my initial review). Covering those gaps with duct tape will also do the trick.
by:
Custom RCP Fit Kit was perfect for my 2018 Chevy Bolt. Screws fit perfectly in the predrilled holes on the Bolt's pVery solid and holds my 80 lb tandem kayak mounted upside down on my rhino rack cross bars with 2 tie down straps over the kayak, and a front strap attached to a loop strap held in pace by the hood. I attached the rear strap to my bike rack trailer hitch. Maiden voyage this past weekend to a spring run 45 minutes from home. Kayak didn't even budge an inch. Rubber on the surface of my rhino racks prevented any slippage.
25
305
true
Show More Reviews

See what our Experts say about this Rhino Rack Accessories and Parts

  • Can 59" and 65" Vortex Bars Fit RCL Legs for Rhino-Rack Crossbars on 2025 Honda CR-V
    Hey Kathy! The RCL Legs for Rhino-Rack Crossbars # RRRCL4 works with both the 59" Long # RRVA150B-2 and 65" long # RRVA165B-2. Are you planning to add these to your 2025 Honda CR-V? If so, you will also need the Roof Rack Leg Spacer Blocks for Rhino-Rack Vortex Aero Crossbars # RRQMVA10 along with the RCP Base Kit (x4) # RR54RN. It is also worth noting that Rhino-Rack recommends the 49" bars # RRVA126B-2 for this setup but the longer bars will work if you need more space.
    view full answer...

Info for this part was:

Employee Steven C
Installed by:
Steven C
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Michael B
Updated by:
Michael B
Employee Daron K
Edited by:
Daron K
Employee Lincoln B
Written by:
Lincoln B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.