Video Transcript for All About the Performance Tool Polyurethane Soft Grip Pads for Vise Jaws

Today we're going to be taking a look at the performance tool, polyurethane soft grip pads for vice jaws. They're going to fit vices with a jaw width from three inches to six inches including all performance tool vices. One of the benefits of having these on the vice, is that it's really going to help avoid marring softer objects like wood, plastic, or tubing. There's going to be strong magnets located on the back side. These are going to hold the pad securely to the vice jaws and these are going to be great for holding irregular shaped objects with the multi-grip cut outs. We have an angle cut there, small straight, a little bit wider of a straight cut, another small straight cut, and a thicker straight cut.

It's just got really nice designs on it, which again is going to be great for holding irregular shaped objects. Few measurements to go over with you real quick. Starting with the overall length of the unit, edge to edge each one's going to measure the same. You're looking at about five and a half to five and 9/16 of an inch. Then that grips surface right there, it's going to give us a measurement of pretty close to an inch and a quarter, maybe one and 5/16 of an inch. But it's very simple installation, all you got to do is take these out of the package, place that directly on the vice jaws and those magnets are going to securely hold them in place.

Another neat feature about that is that it can be easily removed whenever you don't want them on your vice jaws. That's going to do it for today's look at the performance tool, polyurethane soft grip pads for vice jaws.