Yakima Landing Pad 1 vs. Landing Pad 26

Question

Question:

What is the difference between Yakima LP1 and Yakima LP26?

asked by: Renato C

0

Expert Reply:

The difference between the Yakima Landing Pad 1 # Y00221 and Landing Pad 26 # Y75ZR are what they fit.

The two come with different hardware and the Landing Pad 1 is mostly for some factory tracks as well as specific vehicles, while the Landing Pad 26 is for Yakima tracks. So the right one is really going to depend on what application you have.

expert reply by: Kyle S

0

Answer 1

Rhino Rack states that the capacity of the Pioneer Platform Rack #RR42114BF is the weight capacity of the vehicle roof it is installed in minus the weight of the platform. The Pioneer Platform weighs 12.5 kg or 27-1/2 lbs so you'd need to…

view full answer...

Answer 2

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 3

I have an answer for you. Without knowing the exact bed size or whether you have RamBox installed on your 2022 Ram 1500, if you are looking to use a Retrax Pro model with the included rails like the RetraxPRO Hard Tonneau Cover #RTT-80245, I cannot…

view full answer...

Answer 4

The maximum static weight capacity for the Yakima HD Crossbars #Y01156 along with the Timberline Towers #Y33TR on your 2022 Subaru Outback Wagon is rated at 500 pounds. This weight limit is the maximum weight limit for each of the components. To have…

view full answer...

Answer 5

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 8

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 9

Hey John thanks for the question. If you Leer Topper doesn't have a set of tracks or crossbars mounted on it you can use the Rhino-Rack Aero Bar Roof Rack for Camper Shells item #Y02-480B to install the 60" Long x 54" Wide Yakima…

view full answer...

Answer 10

Hey Ken! The 50" aero bars are definitely going to be too short. Each Thule Hullavator item #TH898 requires 28-1/2" of crossbar space, so with two of them you will need at least 57" crossbars. This means you'll have to install the…

view full answer...

Answer 11

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

view full answer...

Answer 12

Hi Michael; you can use the same fit kit #THKIT3101 and mounting feet #TH460R. However, the longest WingBar Evo is 60" #TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the #TH713700 which…

view full answer...

Yakima Landing Pad 1 vs. Landing Pad 26

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching