Correct Rhino-Rack Roof Rack Channel Nuts for Trailer with Rhino-Rack Factory Roof Tracks Installed
Question:
My 2023 No Boundaries trailer comes with Rhino Rack tracks on it. Beth at Rhino Rack says this tracks requires a 24x21mm channel nut which appears to be part number N057-BP. The closest thing I can find on the etrailer site is RRQMFK11, which appears to be correct, but upon searching that part on RhinoRack.com, those channel nuts are actually 30x25x5mm, which is why other customers have had to modify them to make them fit. I would love to buy some channel nuts that fit! Any suggestions? Thanks!
asked by: Steven M
Expert Reply:
I spoke with Rhino-Rack and was able to confirm that both the part # RRQMFK11 (30mmx25mmx5mm) and N057-BP (24mmx21mmx4mm) are compatible with the Rhino Rack Factory Roof Tracks. If you're looking to mount a set of crossbars to these tracks, you'll need a few items which I have attached for you below.
Rhino-Rack Quick Mount Legs part # RRRLT600 (Comes With RRQMFK11)
Rhino-Rack Vortex Aero Crossbars part # RRVA180B-2
If you need a different size crossbar, you can choose this from the list below but keep in mind there are channels under the bars which the feet mount to so there is a minimum and maximum depending on the track width.
Products Referenced in This Question
Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4
- Roof Rack
- Feet
- 4 Pack
- Rhino Rack
more information >
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long - Qty 2
- Roof Rack
- Crossbars
- Aero Bars
- 71 Inch Bar Space
- 2 Bars
- Overhang
- Black
- Rhino Rack
more information >
Product Page this Question was Asked From
Quick Mount Nuts for Rhino-Rack RTL600 Legs - Factory Tracks - Qty 4
- Accessories and Parts
- Roof Rack
- Mounting Hardware
- Nuts
- Quick Mount Nuts
- Rhino Rack
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Roof Rack
- Search Results: rhino rack cross bar
- Shop: Replacement Wheel for Ark Xtreme Off-Road Ratcheting Jack
- Shop: Quick Mount Nuts for Rhino-Rack RTL600 Legs - Factory Tracks - Qty 4
- Shop: Rhino-Rack Nautic Stack Kayak Roof Rack w/ Tie-Downs - Post Style - Folding - Universal Mount
- Shop: Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 81" Long - Qty 2
- Shop: Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4
- Shop: Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading - 132 lbs
- Video: All About the NS Accessory Bars for Rhino-Rack Reconn-Deck Bars
- Search Results: rhino rack
- Shop: Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Passenger's Side - 118 Sq Ft
- Search Results: rhino batwing
- Search Results: thule crossbar
- Q&A: Roof Rack and Kayak Load Assist Recommendation for 2011 Chevy Equinox with Raised Side Rails
- Q&A: Can Thule Podium Feet be Used for Roof Rack on 2018 Jeep Grand Cherokee
- Q&A: What is the Difference Between the Aero and Heavy Duty Rhino-Rack Accessory Bars for Platforms?
- Q&A: Comparison of Rhino-Rack Heavy-Duty and Rhino-Rack Vortex Aero Roof Racks
- Q&A: What Load Assist Can be Used with Thule J-Style Kayak Carrier
- Video: Rhino-Rack Nautic Stack Kayak Carrier Test Course
- Video: All You Need to Know About the Rhino-Rack Universal Load Assist
- Q&A: T-Slot Dimensions of Rhino-Rack RT-Style Roof Rack Tracks
- Q&A: Rhino Rack Roof Rack System for 1992 Chevy Suburban with Naked Roof
- Video: Rhino-Rack RT-Style Roof Rack Tracks Review
- Video: Beginner’s Guide to Installing the Rhino-Rack Roof Rack Legs on a 2022 Chevrolet Express Van
- Search Results: weather guard
- Search Results: thule tracks
- Search Results: rrva137s~2
- Video: Complete Breakdown of the Replacement M8 Channel Nut for Rhino-Rack Accessories
- Video: Review of the Quick Mount Nuts for Rhino-Rack RTL600 Legs
John H.
4/10/2024
Hello Conner, I just read this comment by Steven M, followed by your reply. I too am shopping for channel nuts that will fit my 82" Rhino-Rack RTV track (Part #RTV208). I have calipers and I've measured the inside channel width of the track and it is 21mm. There is no way a nut that is 30mmX25mmX5mm (part # RRQMFK11) will fit inside this track without being modified (it is 4mm too wide at its narrowest point). Whoever you spoke with at Rhino-Rack either didn't understand your question or gave you bad information. I felt compelled to relay this information so customers who have the same track as Steven and me don't order the wrong channel nut. Rhino Rack part# N057-BP is in fact the correct part for anyone with an RTV track that has a 21mm wide channel.