Connection Point for Curt Trailer Wiring Harness 56077 on a 2007 Chevy Uplander
Updated 09/18/2013 | Published 09/16/2013
Products Featured in This Question
Question:
I cant find the match on a 2007 Chevy uplander, where should i be looking? Its not where the directions said.
asked by: Micah
Expert Reply:
I am sure you are looking in the right place but there are two possible options for what you might see. If a loose connector is not behind the driver side trim panel in the cargo area of your 2007 Chevy Uplander then it may already be connected to the tail light wiring. You would have to unplug that connection and insert the Curt wiring harness connectors in between that factory connection so the 4-Way end branches off of it.
If that also is not present then you may need to pull up additional trim panels in the cargo area because the connection could be further forward on the vehicle or it may have fallen out of sight.
If you still cannot find it then I recommend going with a different wiring harness, # 118396, that plugs in line with the vehicle tail light wiring.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Visible
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Article: Roof Rack Information
- Q&A: Replacement Curt Trailer Wiring To Replace Older s0601u-r1 Powered Converter
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Attaching a 7-Way Trailer Wiring Harness to a 2000 Oldsmobile Bravada
- Article: What To Look For When Buying Ratchet Straps