Kwikee Steps Won't Retract All the Way Back Series 32 909506000

Updated 08/26/2021 | Published 08/25/2021

Products Featured in This Question

Replacement Motor with Mounting Plate for Kwikee Electric RV Steps

(130)

$197.98

Replacement Gear Box and A Linkage for Kwikee Electric RV Steps

(265)

$111.48

Question:

Here are all the numbers I can find - On the motor is a sticker with a bar code the line under that : 050200 AA C and under that: 5973820 On the shaft housing from the motor to the actuator: 26 On the actuator housing: 151332 On the pivoting part between the housing and the push rod: A On the push rod: 151364 and a 3 at the bend On the pin attach fitting: 151342 First malfunction was the steps would go part way up and with a little help would go all the way up going back down worked ok. Now the steps will only go about 1/2 way up but no further, with or without help. Is this a control module problem or gear box or motor or something else? Series 32, serial number 285880 on the gear box, p.n. 909506000 on the control module When the steps stopped, I turned off the chassis and coach battery switches to avoid overheating something, so I did not listen for the motor running.

asked by: Dan F

Expert Reply:

If you remove the linkage and the steps don't move freely this would indicate the motor is bad and would need to be replaced for which we have the Replacement Motor part # LC379608. If the steps do work without the linkage then the linkage is likely bad and would need to be replaced for which we have the Replacement Gear Box and A Linkage for Kwikee Electric RV Steps part # LC379160.

expert reply by: Conner L