Cutout for Furrion RV Electric Fireplace 26-1/4" W x 16-1/4" H

Question

Question:

what is the measurement of the open to mount the 30 inch fireplace with vents showing.

asked by: Stephen G

1

Helpful Expert Reply:

The Furrion RV Electric Fireplace with Logs - 30" Wide - Recessed Mount, # F30SW15ABL per installation instructions (starting, page 7). Listed under the Wall-mount Installation (Half Flush-mounted) the table shows dimensions of cut out for 26-1/4" x 16-1/4" with an offset from your edge at 5".

expert reply by: Michael R

1

Cabinet Cutout Dimesions
(click to enlarge)

Answer 1

I have included a picture of the back of what the Boat Buckle G2 straps, #IMF08893, look like. Mounting hardware (2 bolts, nuts, and washers) are included. You can also get optional mounting brackets, #IMF14254, if you need to move the straps off the…

view full answer...

Answer 2

Yes, the Furrion 30" Electric Fireplace #F30SW15ABL referenced in your question is designed to be installed flush against the wall into a recessed opening. The thin trim border on the unit will still extends out from the wall (maybe about a 1/8…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 5

I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you don't…

view full answer...

Answer 6

Great question, Kevin. The Onboard Scale system on your 2024 Ford F-350 Super Duty works by essentially measuring how low the bed is sitting and it gives an estimated weight based off of that. If you added a suspension enhancement then that would…

view full answer...

Answer 7

Hi Duane, Air Springs are better for leveling loads and will typically give you a rougher unloaded ride quality so these might not be the best option for your setup depending on what your intended use is. Air springs are the best option when it comes…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The differences between the Firestone Ride Rite #F2613 and the Red Label #F2709 for your 2023 GMC Sierra 3500 Crew Cab Long Bed is the air pressure and max weight capacity. The Ride-Rite #F2613 are rated for 5,000lbs and 100 PSI, where the Red Label…

view full answer...

Answer 10

There are a number of differences between the Firestone Ride-Rite Air Helper Springs #F2445 and Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88299, starting with fit. While the Air Lift will fit all models of the 2018 Toyota Tundra, the…

view full answer...

Answer 11

Hey Mark, the instructions for the Air Lift kit part #AL88240 that you referenced do indicate that you will need to do some drilling to install this kit. That said, we've had a few customer come back and tell us they didn't need to drill at…

view full answer...

Answer 12

Hey Gary that's a great question and the answer is yes! However, you're going to need the Firestone Heavy Duty item #F56VV over the Standard Duty item #F2610. The Firestone Air Bags item #F56FV, that fit your 2024 GMC Sierra 3500, are the Red…

view full answer...

Cutout for Furrion RV Electric Fireplace 26-1/4" W x 16-1/4" H

Featured Help Information

Miscellaneous Media

Continue Researching