How To Use 2018 Jeep Wrangler Wheels On a M416 Military Trailer
Updated 05/19/2020 | Published 05/15/2020
Products Featured in This Question
Question:
Dear etrailer Expert, I acquired an M416 trailer and am servicing the hubs replacing the bearings and races. I realized that my 2018 Wrangle JL take offs dont fit the hub even though the M416 almost has the same bolt pattern. I am looking for adapters that would allow me to put my 2018 Wrangler JL take offs onto the M416 trailer. I apologize if I am not making any sense. I am very novice at this and this is my very first attempt in restoration of a military trailer. Sincerely,
asked by: Chinh N
Expert Reply:
The 2018 Jeep Wrangler JL has wheels which use a 5 on 5" bolt pattern. Therefore, in order to transfer these wheels to a trailer you'll need to obtain hubs with this bolt pattern. I do have options for this but they are only available for 3,500 lbs axles.
The majority of military trailers don't use these standard axles so the only way to really install the wheels you want is with a new axle, the Timbren Axle-Less Trailer Suspension part # ASR1THDS01 which also has the needed clearance for Jeep wheels/tires. This system can then be used with the Trailer Idler Hub Assembly part # AKIHUB-550-35-EZ-K.
If you need to add brakes instead just let me know.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 4 Bolt Flange - 2,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Bestop Sun Bikini - Safari Style Extended Length - Black Diamond
- Shop: Bestop Full-length Header Bikini, Safari Version for Jeep - Black Diamond
- Shop: Bestop Safari Bikini for Jeep - Cable Style - Black Diamond
- Q&A: Replacement Hubs to Fit the Timbren Axle-Less Suspension System, # A20RS545
- Q&A: Compatible Idler Hubs and Hub/Drums for Use with Timbren Axle-Less Suspension System
- Q&A: How to Determine Between 5 on 4-1/2 and 5 on 5 Bolt Patterns for Hub Covers
- Q&A: Availability of 3,500 lb Axle Hub with 6 Lug Bolt Pattern that Fits Timbren Axle Less Kit
- Q&A: Should Wheel Spacers be Used for Tires Rubbing Trailer Frame
- Q&A: Troubleshooting Intermittent Curt Echo Brake Controller Trailer Connection Error Code
- Q&A: What Ohms Should Trailer Brake Magnets Be?