Parts Needed To Convert Dexter Torflex 2,200 Lb Axles to Disc Brakes
Published 08/13/2019
Products Featured in This Question
Question:
I don’t want to spend so much for an actuator. There must be a surge coupler at a much lower cost.
asked by: Martin G
Expert Reply:
I do have what you need but there is not an entire kit for this nor will the Titan Disc Brake Kit and BrakeRite Electric-Hydraulic Actuator part # T4843800 work. The parts you will need are as follows:
Kodiak Disc Brake Kit part # K2HR2D (2)
Titan BrakeRite EHB Electric-Hydraulic Actuator part # T4813102
Titan Hydraulic Brake Lines and Fittings part # T4830000
Gel Cell Breakaway Kit for Titan BrakeRite Systems part # T4822100
Trailer Wiring 7-Way Upgrade Kit part # e99011
The above contains all of the parts from the kit you were looking at save for the hubs/rotors which have been replaced with the correct set.
Continue Researching
- Video: All About the Caliper Rebuild Kit for 6,000-lb to 8,000-lb Dexter Disc Brakes
- Video: All You Need to Know About the Replacement Disc Brake Piston for Dexter 8,000-lb Caliper
- Shop: Caliper Rebuild Kit for AL-KO/Hayes Disc Brakes - 10,000 lbs and 12,000 lbs
- Shop: Caliper Rebuild Kit for 6,000-lb to 8,000-lb Dexter Disc Brakes
- Shop: Kodiak Disc Brake Caliper Rebuild Kit for 7,000 lb to 8,000-lb Trailer Brakes
- Shop: Kodiak Disc Brake Caliper Rebuild Kit for 3,500 lb to 6,000 lb Trailer Brakes
- Shop: Replacement Disc Brake Piston for Dexter 8,000-lb Caliper
- Shop: Replacement Caliper for Dexter Disc Brakes - Left Hand or Right Hand - E-Coat - 7,000 lbs
Marty
8/13/2019
I don’t want to spend so much for an actuator. There must be a surge coupler at a much lower cost.