How To Install Replacement Kwikee Electric Step Motor and Linkage Kit To RV

Question

Question:

I have ordered parts LC379147 and LC379649. When I put the new pieces on the step should the step fully extended or fully retracted. Do I need to run motor to adjust linkage prior to pinning the linkage to the step?

asked by: Ron F

0

Expert Reply:

I contacted the manufacturer and to install the Lippert Components Kwikee Motor, Item # LC379147, and Kwikee Step Linkage Kit, Item # LC379649, you will need to fully extend the steps. After installing the motor, install the links and no adjusting will be required. The motor will make the adjustments after you complete the installation when it retracts.

Contact us if you have other questions.

expert reply by: Brint H

0

Harold S.

4/2/2020

I. Cannot get motor to break loose after removing the 3 screws 2 of them broke offWhat should I do to break it loose?Thanks

Reply

Chris R.

4/3/2020

Those 3 screws you removed should be all that's physically holding the motor to the step assembly. Sometimes the motor can kind of get stuck in place like you're experiencing, but other than using both hands to wiggle it free - gently (but firmly) rocking it back and forth as you pull down - there's not much else you can do. It should eventually break free.

Reply

Answer 1

We have exactly the motor you are looking for. If your Kwikee 32 Series Steps were produced between 2000-2005 you will need the Replacement Motor with Mounting Plate for Kwikee Electric RV Steps #LC379608, and if your steps were produced from…

view full answer...

Answer 2

The picture came across pretty blurry, but I was able to pull enough off of it to determine that you have the Kwikee RV Electric Steps - Platinum Series #LC372558. The correct replacement motor for those steps is the Replacement Motor for Kwikee…

view full answer...

Answer 3

In order to determine the correct gear box replacement for your Kwikee RV steps, you'll want to look for a series model of the step, that is usually found printed on the underside of the step. For example, if your step indicated that you had…

view full answer...

Answer 4

The Replacement Entry Step Gear for Electric RV Steps #LC369354 is the correct gear plate if you have the Kwikee 24 or 25 series electric RV steps. If these are not the steps that you have, please let me know what steps you have and I would be happy…

view full answer...

Answer 5

The Lippert Components Kwikee Table Motor and Cable Assembly #LC369529 differs from the Lippert Components Kwikee Step Replacement Kit for 25 SERIES, IMGL/9510 CONTROL #LC379804 in that the latter is for models prior to 2006 and includes the wiring…

view full answer...

Answer 6

The correct linkage you need for the Kwikee step you mentioned is the part #LC369488. For replacement parts beyond that you'd need the part #LC369529 which is a motor, gear and table replacement.

view full answer...

Answer 7

Sounds like you are looking for the Replacement Self-Lubricating Bushing for Lippert Electric Coach Step #LC116531 which does not come with the gear part #LC369354 that you referenced.

view full answer...

Answer 8

If the motor replacement for your Kwikee step is the Lippert Components Kwikee Step Motor Replacement Kit For Pre-IMGL #LC379608 or the Lippert Components Kwikee Motor and Screws for New IMGL Step #LC379147, then the gear/linkage you would want is…

view full answer...

Answer 9

IMGL when referencing the Kwikee steps stands for Integrated Motor Gear Box Linkage. In October of 2004, Kwikee Steps made by Lippert changed their system from the separate parts to the integrated system. Prior to this there was a cast linkage…

view full answer...

Answer 10

It looks like you have a Kwikee 24/25 Series Electric Step. In which case, if you need a new motor you'd actually want to go with the Replacement Motor with Gear and Table for Kwikee 24 and 25 Series Electric RV Steps part #LC369529. You…

view full answer...

Answer 11

Since your Georgie Boy Pursuit is a 2008 model, you will need the Lippert Components Kwikee Motor and Screws for New IMGL Step #LC379147. The motors changed from October to November of 2005, so you can rest assured it is the correct replacement.

view full answer...

Answer 12

Thanks for the pictures! Yes, the Replacement Motor for Kwikee Electric RV Steps - 12V item #LC379147 will replace your 2015 LCI 369545 motor.

view full answer...

How To Install Replacement Kwikee Electric Step Motor and Linkage Kit To RV

Product Page this Question was Asked From

Continue Researching