What Class Hitch is on 2011 Kia Sorento EX with 1-1/4 Inch Hitch and 3,500 Pound Towing Capacity
Question:
I bought my KIA 2011 Sorento from a dealer with the hitch already installed. Window Sticker says 3500 lb towing capacity. Hitch has a 1 1/4 tube instead of a 2 receiver tube. Does this mean I do not have a Class III hitch. There is no notch inside the receiver tube that prevents the hitch ball from going all the way in. The car has only a 4 prong wire connection. What do I have?????
asked by: John F
Expert Reply:
It sounds like the hitch you have on your 2011 Kia Sorento EX is a Class II 1-1/4 inch hitch with a 3,500-lb gross towing capacity. Your hitch will work with Class I and Class II accessories, such as bike racks and cargo carriers.
All of the aftermarket hitches I have for a 2011 Kia Sorento are Class III 2 Inch hitches that have a gross towing weight capacity of 3,500 lbs and a tongue weight capacity of 350 lbs.
All of the 2011 Kia Sorentos with a tow package will come with a 4-Way trailer connector. A 4-Way connector allows the basic hookup of the three lighting functions ( running, turn signals, and brakes) on a standard light duty trailer.
I am including a link to a page that will list the hitches available for your vehicle.

Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Is Drilling Required to Install Draw-Tite Trailer Hitch on 2012 Hyundai Santa Fe
- Q&A: Installation Difficulty of the Curt Hitch C67RJ on a 2023 Toyota Prius
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: How To Determine if a 2011 Kia Sorento has the Factory Towing Prep Package
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Warranty Implications of Installing Trailer Hitch on 2019 Jeep Compass
- Q&A: Cleaning Threaded Holes on a 2011 Kia Sorento to Install a Draw-Tite part # 75684
- Q&A: Installing Curt Class III Trailer Hitch on 2013 Kia Sorento SX with Factory Tow Prep Package
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation on a Ford Full-Size Van