Trailer Axle With 2000 Pound Weight Capacity and 60 Inch Hub Face
Products Featured in This Question
Question:
Axle hub face to hub face is 60inch long Need an axle kit for a Haulin single axle garden trailer. No brakes. Its 66 Long end to end and has a 2000 lb stamped on it. Its a dexter p-1 SLR, 4 lug hub
asked by: Greg
0
Expert Reply:
For a 2000 pound axle with a hub-face-to-hub-face length of 60 inches and a 4 on 4 bolt pattern Dexter Axle # 20440I-ST-60 is what you're looking for. This comes with the hubs, bearings, races, and seals.
For an axle without the hubs use # T20BTR-6048.
For a U-Bolt Kit to mount the axle you can use # APUBR-10
expert reply by:
Charles S
0
Product Page this Question was Asked From
Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended Trailer Axle For Haul Master 4x8 Foot Trailer
- Article: Trailer Lighting Requirements
- Q&A: How Much Taller is a 5.30-12 Trailer Tire Compared to a 4.80-12 Trailer Tire
- Q&A: Can a 5.30-12 Size Tire be Replaced with a ST145/R12 Size Tire
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Replacement Hub Recommendation for Trailer with .99 inch Bearing ID Surface Dimension
- Q&A: Recommended 2000lb Axle For Harbor Freight Trailer
- Q&A: Replacement Axle Recommendation for 49.5 Spring Center and 59.5 Hub Face Measurements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Determine Tire/Wheel Diameter
- Article: Slipper Spring Trailer Suspension System Review
- Article: Most Popular Wheel Bearings
- Article: Where to Position the Trailer Axle?
- Article: Double-Eye Trailer Suspension System Review