What Do Abbreviations EB and XL Mean on Trailer 7-Way

Question

Question:

What does XL and EB stand for on a pin connector for a trailer? LT is left turn? RT is right turn? BU is back up? TM is Tail Marker tail lights? EB is ???? XL is ????

asked by: Gene

0

Expert Reply:

EB would stand for electric brake on a trailer connector. This is the circuit that carries voltage to the brake assemblies of the trailer. XL would be auxiliary and is typically a 12 volt power circuit used for lights or maintenance charge on a trailer battery.

expert reply by: Jameson C

0

Answer 1

Yes, we do. I recommend Curt, part #C13406. It's a fit for all of the 2018 RAV4's including the Hybrid model like you have. I like how the crosstube is hidden behind the RAV4's bumper and all you see is the receiver tube sticking out.…

view full answer...

Answer 2

The listed towing capacity of your 2004 Chevy Silverado LS short bed with 5.3L engine is going to vary depending on some specifics of the vehicle. If the Silverado is four-wheel drive and has a 3.73:1 axle ratio, the capacity is 7,800 lbs (extended…

view full answer...

Answer 3

I have attached a photo of the Pollak Heavy-Duty, 7-Pole #PK11700 as viewed from the front with all of the correct wiring connections noted. 12:00 - White Wire is Ground. 2:00 - Brown Wire - Tail and Running Lights. 4:00 - Green Wire - Right Brake…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

What Do Abbreviations EB and XL Mean on Trailer 7-Way

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching