Finding The Right Size Bearing Buddy For Utility Trailer
Products Featured in This Question
Question:
I have a 2004 carry on 6x12 utility trailer. I measured the inner part of the cap and its 2in. What bearing buddy would work for my trailer? Noticed there 1.98 and 2.04 sizing
asked by: Mike C
Expert Reply:
You'll need to use an accurate measuring device like a digital caliper to measure the inside diameter of the hub bore. A ruler or tape measure wouldn't be accurate enough. I have attached a photo of a hub that shows where the measurement should be taken.
If you measure and find the opening to be 1.98 inches then the Bearing Buddy I recommend is part # BB1980A-SS.
If you find that the inside hub bore measures 2.047 inches, part # BB2047SS would work well for you.
If you find that the inside bore of your hub is a different size than those mentioned above, you can check out the attached link to the product page for the Bearing Buddys we offer and use the menu to find the right size for your trailer.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Bearings for a Malone MicroSport Trailer
- Video: In-Depth Review of the etrailer Bearing Protectors w/ Covers for 1.78" Hub Bore
- Shop: etrailer Bearing Protectors w/ Covers for 1.78" Hub Bore - Chrome - Qty 2
- Shop: etrailer Bolt-On Swivel Mounting Plate for 3,500-lb Trailer Jacks with a 5/8" Swivel Pin
- Q&A: Bearing Protector Not Wanting to Fit Into Hub Bore
- Shop: Bearing Buddy Bearing Protectors - Model 1938SS - Stainless Steel (Pair)
- Shop: Bearing Buddy Bearing Protectors - Model 1938 - Chrome Plated (Pair)
- Search Results: bearing buddy
- Shop: Optronics LED Mini Clearance or Side Marker Trailer Light - Submersible - 2 Diodes - Red Lens
- Search Results: trailer alarm system
- Video: Feature Review Blaylock Door Lock for Enclosed Trailers
- Q&A: What Air Pressure Should I Run in My Trailer Tires?
- Video: Review of etrailer Bolt on Swivel Jack Mounting Plate - e52JR
- Video: Comprehensive Review: Square Drop Leg Stabilizer Jack
- Video: etrailer Bolt-On Swivel Trailer Jack Mounting Plate Review
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Search Results: thule evolution 1600 xt
- Search Results: trailer bearings races seals caps
- Q&A: Recommended Bearing Buddy Kit for Carry-On 5X8G Trailer
- Q&A: Can 215-60-8 Trailer Tires be Replaced with 215/65-10 Tires on Snowmobile Trailer
- Q&A: What are the Different Load Ranges for the Trailer Tire Size 205-65-10
- Q&A: Triton Trailer Spindle Size Hub is a Dexter 8-247
- Video: Installing the K-Source Snap & Zap Custom Towing Mirrors on a 2024 Ford F-150
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: How to Measure for Trailer Hitch Drop
- Video: Finding the Right Trailer Wiring Harness
- Shop: Trailer Wiring
on Trailer Bearings Races Seals Caps
