1999 Ford Mustang Windshield Wiper Blades

I attached a picture that shows what the three different styles of wiper blades look like. Beam and Frame are the most different and Hybrid is mix of the two. The #MCH8519 is the hybrid style in the middle.

Yes, the Wiper Technologies Heavy Duty Windshield Wiper Blade - Beam Style - 36" - Qty 1, part #WPR66FR, will attach via a j-hook. It comes with an adapter that makes it compatible with a j-hook style wiper. I…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

According to my contact at Fantastic Vent the correct replacement lift motor to use in your vent is part #FVK6010-81, not item FVK-6050-80. The replacement motor does operate at a higher 17-RPM speed. Since your fan is of a lower rpm and…

Your 2021 Ram 3500 uses 24" wiper blades. The #RX5079274-2 are only 16" long and we don't have a 24" in this style.…

The replacement motor for the Greystone RV Range Hood with Light - 12V - 24" Wide - Black Item #324-000087 is the Replacement 12-Volt DC Fan Motor for Ventline RV Range Hood Item #BVD0218-00. If you also need to…

Here is the wiring diagram from SeeLevel for the Monitor #SE94VR. I hope this helps you clear things up and get it working.

To connect a Curt Tow Bar #C26FR to your Blue Ox Base Plates #BX1143 all you need is an adapter #BX8833. The non-binding feature makes it easier to unhook to tow bar when you're on an uneven surface. Not being level…

The Replacement Quick Pins #DE99FR will fit your Blue Ox Alpha 2 Non-Binding Tow Bar #BX7380. This is a much better option than the entire Triple Lug Kit #BX88154 you would have to get from Blue Ox for their specific pins.

There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…

The Stromberg Carlson Electric Landing Gear Set #LG-2 has a 5500-lb lift capacity so it will be fine for use on a trailer with 2200-lbs of actual pin weight. To confirm a fit verify that on your existing landing gear the distance between the…