1992 Ford F-150 Vehicle Tent

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Great question. We did actually install a Rightline Truck Bed Tent #RL110730 on a 2018 Chevy truck just the other day. I will admit, this being the first time I had done one, it was slightly confusing at first. Having an extra pair of hands around…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, the Sidewinder wedge part #RP44FR is the correct wedge to use with the Reese M5 hitches like the part #RP75VR.

The Pace Edwards Switchblade Retractable Hard Tonneau Cover #PE63CV covers the stake pockets so it won't be compatible with the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH94RE on your 2022 Chevy Silverado 2500HD with the 6-3/4' bed.…

The Draw-Tite Max-Frame Trailer Hitch Receiver #75600 is going to be our closest receiver which meets your requirements on your 2014 BMW X5 35i. The Curt #13077, Draw-Tite #DT36GR (76903), and EcoHitch #EH44FR (X7403) all require the removal of the…

Yes, since your BAKFlip tonneau cover, like the G2 #BAK26329, has rails that sit inside the bedrails of your 2016 Ford F-150 the Rightline Truck Bed Tent #RL110750 is compatible with it. Please note that you will want to open up the tonneau cover…

For a 2023 Jeep Wrangler 4XE you'll need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These custom-fit baseplates are designed to work with factory bumpers, if you have an aftermarket bumper please…

I wouldn't be concerned with the gap on the ends of your cross tube. The only thing that matters is that the 4 bolts that you use to install the #DT35MR are snug and secure. Assuming you have installed these correctly, and used the proper torque…

The trailer hitch I recommend for a 2023 Hyundai Tucson is the Curt Trailer Hitch Receiver part #C94WR which I confirmed as a fit with Curt for all models, including the Hybrid. This trailer hitch features a bolt-on installation so there is no…

Quite accurate; the margin of error is 3 percent for the etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity #e99044. I don't see varying levels of liquid in the photos, but do see a customer photo with the scale…